Monitor: a line assembler

a <address>, then instructions until a line that is just a dot.

The syntax is the assembler's own: a selector rides on the mnemonic as LDA.0
or LDD.0.1, and leaving one off means Data Pointer 0 exactly as it does in a
source file, so nothing learned at the monitor has to be unlearned when
writing a program. Case is folded, since the assembler does not care either.

Numbers are hexadecimal and bare. A source file writes 0x2000 or 0d16 because
it has both and must say which; a monitor has one and says so once, in the
manual, rather than on every line.

It reads the same table the disassembler does, searched the other way round,
which is the point of it being a table rather than two lists: what a writes,
d reads back, and neither can drift from the other or from the assembler both
were generated from. Instruction lengths come from the shared shape table
too, so the cursor cannot get out of step with what was written.

THE WHOLE LINE IS UNDERSTOOD BEFORE ANYTHING IS WRITTEN. Emitting the opcode
first and discovering a missing operand afterwards leaves half an instruction
in memory, which the next line usually covers up and the last line of a
session does not. Written that way first and fixed.

What cannot be written is a label, and that is the whole difference between
this and the assembler proper: a label is a promise to fill an address in
later, and later is what a line at a time does not have.

The recorded test now types in a complete program - a string poked into Data
Memory, instructions assembled into Program Memory, and the result run - and
includes a lower case mnemonic, both selector forms, an instruction that does
not exist and one missing its value, so the refusals sit beside the successes.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

Tests/expected/cosmosBreak.out

@@ -3,11 +3,11 @@ CosmOS
 > two stops, and what the registers were at each
 break at 200E
 A 11 B 22 Q 00 status 00 
-DP0 1030 DP1 05EF DP2 039A DP3 2000 SP FFFF
+DP0 1030 DP1 0661 DP2 039A DP3 2000 SP FFFF
 press a key 
 break at 2023
 A 44 B 55 Q 00 status 00 
-DP0 1000 DP1 05EF DP2 039A DP3 2000 SP FFF5
+DP0 1000 DP1 0661 DP2 039A DP3 2000 SP FFF5
 press a key 
 carried on to the end
 finished

Tests/expected/cosmosKeys.out

@@ -8,7 +8,7 @@ finished
 cd
 the console has been handed back
 finished
-> > x examine, d disassemble, s set, b bank, g go, exit leaves
+> > x examine, d disassemble, a assemble, s set, b bank, g go, exit leaves
 * bank 00
 * FE00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
 FE10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

Tests/expected/cosmosMonitor.out

@@ -1,5 +1,5 @@
 CosmOS
-> x examine, d disassemble, s set, b bank, g go, exit leaves
+> x examine, d disassemble, a assemble, s set, b bank, g go, exit leaves
 * b <program|data|number>
 * there is no such bank
 * loaded, starting at 2000
@@ -46,6 +46,20 @@ finished
 800A  00           ADD
 800B  00           ADD
 800C  00           ADD
+* bank 01
+* * bank 00
+* 8200: 8204: 8206: 8208: 820B: no such instruction
+820B: that one needs a value after it
+820B: 820D: * 8200  47 00 81 00  SETD.0 8100
+8204  18 10        SWI 10
+8206  42 02        LDA.2
+8208  4A 00 01     LDD.0.1
+820B  18 12        SWI 12
+820D  00           ADD
+820E  00           ADD
+820F  00           ADD
+* hello, typed
+finished
 * > greet.sbx               210
 hello.sbx               52
 Life.sbx                1411