; Grid, the first program to use the screen as a screen. ; ; Everything drawn on this machine so far has been text or a bitmap. The tile engine has ; been there since the screen was built and nothing had touched it: the console uses it, ; but only ever to put a letter in a cell, which is the one thing it can do that a plain ; character display could do too. ; ; This redefines a tile, fills a map bigger than the screen with it, and then scrolls that ; map by writing ONE BYTE A FRAME. No memory moves. The rows above and below the screen are ; already there, so what a scroll costs is not the 2,000 bytes of a screenful but the one ; byte that says which row is on top. ; ; ---- Where its tiles live ---- ; ; At 200, and the font is why. The machine wakes with the font in tile memory - glyph n at ; tile n, for 135 of the 256 - so a program that starts writing tiles at zero paints over ; the alphabet and the shell it is going to hand the machine back to. Above 135 is empty and ; nobody else's, so nothing here has to be put back afterwards except the map. ; ; Written by Anachronaut #Include services.asm #Program #Base 0x4000 start: ; ---- Reaching video memory ---- ; ; The CPU cannot touch it. It belongs to the device, and the only way in is to give it a ; bank number and go through the memory controller - the same as the disk's buffer. INIA 0d3 OUTA 0xE3 ; DestBank: the number it will answer to. INIA 0x30 OUTA 0xE2 ; SourceLow: the port of the device that owns it. INIA 0x03 OUTA 0xE8 ; RegisterBank. CALL putTile CALL putPalette CALL putMap ; Key mode, so that a key arrives when it is pressed rather than when Return is. Put back ; before this returns, and CosmOS puts it back too if a program forgets. INIA 0x01 OUTA 0x02 ; ---- The loop ---- ; ; Wait for the screen to finish a frame, count four of them, move the origin down one row. ; That is fifteen rows a second, which is slow enough to watch and fast enough to look ; deliberate. RSTA SETD.0 Ticks STA.0 everyFrame: CALL waitFrame ; Anything typed ends it. Asked for, never waited for: the console holds the key until ; somebody wants it, so nothing pressed between frames is lost. INA 0x01 INIB 0x01 ; READY AND BNQ finished SETD.0 Ticks LDA.0 INCA STA.0 INIB 0d4 CCF SUB BNQ everyFrame RSTA STA.0 ; DP0 is still Ticks, from the count just above. ; ---- The scroll itself ---- ; ; One byte. The map is 128 rows and the screen shows 25 of them, so this walks the origin ; through a ring: what leaves the top has not gone anywhere and comes back round. SETD.0 Origin LDA.0 INCA INIB 0x7F AND MVQA STA.0 OUTA 0x34 BRI everyFrame finished: ; The key that stopped it, taken so the shell does not find it waiting. INA 0x00 ; ---- Putting the screen back ---- ; ; The origin first, then every cell of the map and not just the visible ones. A console ; that scrolls would otherwise walk down into rows this program filled, and find a grid ; underneath its own output. RSTA OUTA 0x34 INIA 0d3 OUTA 0xE3 INIA 0x40 OUTA 0xE4 RSTA OUTA 0xE5 OUTA 0xE2 ; The byte to write: tile 0 is the space, attribute 0 is plain. INIA 0x80 OUTA 0xE6 RSTA OUTA 0xE7 ; 0x8000 bytes, which is the whole map. INIA 0x02 OUTA 0xE8 ; Fill. ; ---- And the colours it woke up with ---- ; ; Only the first pair, and that is worth being honest about. The console's own scheme is ; sixteen banks - colours on black in 0 to 7, the same colours inverted in 8 to 15 - and ; this program wrote over all of them, because the attribute nibble lands on exactly the ; entries the console uses and there is nowhere else for it to land. Putting all thirty two ; back would mean copying the device's own table into an application, which is the kind of ; duplication that goes stale the first time somebody picks a nicer green. ; ; So it restores bank 0, grey on black, which is what plain text has always been and what ; the shell will be using when it gets the machine back. The other fifteen keep this ; program's colours until something else writes them, which is visible only to a program ; that sets the console's attribute port. ; ; THE REAL ANSWER IS A COMMAND TO THE SCREEN saying "give me back what you woke up with", ; the same way the console has one for clearing. There is not one, and this program is the ; first thing that ever wanted it. INIA 0d3 OUTA 0xE3 INIA 0xFC OUTA 0xE4 RSTA OUTA 0xE5 OUTA 0xE9 ; Entry 0, the paper: black. OUTA 0xE9 OUTA 0xE9 OUTA 0xE9 INIA 0xD8 OUTA 0xE9 ; Entry 1, the ink: grey. OUTA 0xE9 OUTA 0xE9 RSTA OUTA 0xE9 OUTA 0x02 ; Line mode, the way it was found. RSTA ; splitlint[redundant-assignment]: an exit status, not a mode SWI osExit ; ---- A frame ---- ; ; Asked for rather than waited on with an interrupt. Polling costs a program nothing it ; needs here and saves installing a vector, and the status bit is honest: reading it is what ; answers it, so this cannot see the same frame twice. waitFrame: INA 0x30 INIB 0x01 AND BRQ waitFrame RET ; ---- The tile ---- ; ; Blitted rather than written a byte at a time, because it is already sixty four bytes of ; Data Segment and the controller will move it in one command. Tile n starts at n times 64, ; so tile 200 starts at 12,800, which is 0x3200. putTile: INIA 0x01 OUTA 0xE0 ; SourceBank: Data Memory. ; The pointer BEFORE storing through it. Written the other way round the first time, which ; assembles perfectly and stores the address into wherever DP1 was last left - so the blit ; read its sixty four bytes from nowhere in particular and tile 200 came out as noise. SETD.1 TileArtAt SETD.0 TileArt STD.0.1 LDA.1 OUTA 0xE1 INCD.1 LDA.1 OUTA 0xE2 INIA 0d3 OUTA 0xE3 INIA 0x32 OUTA 0xE4 RSTA OUTA 0xE5 OUTA 0xE6 INIA 0d64 OUTA 0xE7 INIA 0x01 OUTA 0xE8 ; Blit. RET ; ---- The colours ---- ; ; The tile is drawn in indices 0 and 1, and the low nibble of a cell's attribute is ADDED to ; every index in it, sixteen at a time. So the same sixty four bytes appear in sixteen colour ; schemes, and what this writes is those schemes: entry 16n is the ground and 16n+1 the line. ; Nothing is duplicated to get them. ; ; ---- Nothing here works out an address ---- ; ; The first try computed where entry 16n lives - 0xFC00 plus 64n - and was wrong twice for ; the same reason, which is that this machine cannot multiply and pretending otherwise is ; where the bugs go. 64n reaches 960, so the address spans four pages and the high byte moves ; too; and doubling A by adding B to it needs B to hold A first, which RSTB is the opposite ; of. ; ; So it writes all 256 entries in order and never computes anything. The controller's Data ; port steps the address on after every byte, so the whole palette is one sweep of 1,024 ; writes with no arithmetic in it at all. The colours that change do so by adding sixteen to ; a running value, which is the same reason. putPalette: INIA 0d3 OUTA 0xE3 INIA 0xFC OUTA 0xE4 RSTA OUTA 0xE5 SETD.0 Scheme STA.0 SETD.0 LineRed STA.0 INIA 0xFF SETD.0 LineGreen STA.0 everyScheme: ; Entry 16n, the ground: the same dark under every scheme. INIA 0d16 OUTA 0xE9 OUTA 0xE9 INIA 0d24 OUTA 0xE9 RSTA OUTA 0xE9 ; Entry 16n+1, the line: more red and less green the further down the map it is, so that ; scrolling is visibly going somewhere rather than showing the same row again. SETD.0 LineRed LDA.0 OUTA 0xE9 SETD.0 LineGreen LDA.0 OUTA 0xE9 INIA 0d96 OUTA 0xE9 RSTA OUTA 0xE9 ; The fourteen this tile never asks for. Written anyway, because the sweep is what keeps ; the address right and skipping them would mean working one out. INIA 0d14 SETD.0 Spare STA.0 everySpare: RSTA OUTA 0xE9 OUTA 0xE9 OUTA 0xE9 OUTA 0xE9 SETD.0 Spare LDA.0 DECA STA.0 BNA everySpare SETD.0 LineRed LDA.0 INIB 0d16 CCF ADD STQ.0 SETD.0 LineGreen LDA.0 CCF SUB ; B is still sixteen, from the red just above. STQ.0 SETD.0 Scheme LDA.0 INCA STA.0 CCF SUB ; And still sixteen here, which is also how many schemes there are. BNQ everyScheme RET ; ---- The map ---- ; ; All 128 rows, not the 25 the screen shows. That is the whole point of a map bigger than ; the screen: the rows above and below are already drawn, so scrolling is a change of origin ; rather than a change of anything. ; ; A ROW IS A PAGE, which is why the row number is written straight into DestHigh and the ; column arithmetic disappears. The controller's Data port steps the address on after every ; byte, so a row is a loop over two writes with no address handling in it at all. putMap: RSTA SETD.0 MapRow STA.0 everyRow: INIA 0d3 OUTA 0xE3 SETD.0 MapRow LDA.0 INIB 0x40 CCF ADD OUTQ 0xE4 ; The map starts at 0x4000 and a row is a page. RSTA OUTA 0xE5 ; The attribute is the row number's low nibble, so the schemes band down the map and ; repeat every sixteen rows. DP0 is still MapRow, from the row's address above. LDA.0 INIB 0x0F AND SETD.0 RowAttribute STQ.0 ; ---- How wide the screen is, asked rather than assumed ---- ; ; This said forty, and filled exactly half of an eighty column screen. CosmOS asks for the ; wide mode when it starts, because its own help text is seventy-four characters across - ; so a program that assumes the shape the MACHINE wakes up in is wrong about the shape the ; SYSTEM is running in. The screen will say if it is asked. INA 0x32 SETD.0 RowCells STA.0 everyCell: INIA 0d200 OUTA 0xE9 SETD.0 RowAttribute LDA.0 OUTA 0xE9 SETD.0 RowCells LDA.0 DECA STA.0 BNA everyCell SETD.0 MapRow LDA.0 INCA STA.0 INIB 0x80 CCF SUB BNQ everyRow RET #Data #Base 0x2000 Ticks: 0x00 Origin: 0x00 Scheme: 0x00 Spare: 0x00 LineRed: 0x00 LineGreen: 0x00 MapRow: 0x00 RowAttribute: 0x00 RowCells: 0x00 TileArtAt: 0x00 0x00 ; ---- Eight by eight, a byte a pixel ---- ; ; A line along the top and one down the left. Tiled edge to edge they meet, so a screenful ; of this one tile is a continuous grid rather than 1,000 separate boxes. TileArt: 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00