Files
SplitBit-Emulator/Tests/expected/cosmosMonitor.out
T
Anachronaut 7e82b64d47 A dock that slides into line, and settles squarely on the port
Two things, and the second is the one that was actually wrong.

The lander is slid into place at half a pixel a frame rather than put
there. A dock is allowed eight pixels out in either direction, so
snapping moved it a whole tile in a single frame - a jump, at the very
moment the player was being told they had been careful. The worst gap
closes in about half a second, which reads as the two of them settling
together.

And it settles SQUARELY now. It used to come to rest four pixels out
however carefully it was flown, because the lander is drawn from half a
screen less half a tile - which is what centres an eight pixel lander on
the middle - while the station was drawn from half a screen exactly, so
its left edge sat where the lander's centre was. Both come off the same
origin now, and a gap of nothing puts one exactly above the other.

stationGap is factored out along the way. Three callers wanted it: the
one that draws the station, the one that decides whether it can be docked
with, and now the one that slides the lander in under it. The sideways
ease goes through that wrapped gap rather than the raw positions, because
a dock made either side of the moon's seam has a raw difference of most
of a moon.

---- And the fixtures moved to frame 400 ----

A dock waits to be told its message has been read, and reading a state
file costs a disk read, so a placed run starts a good deal later than a
plain one. The acknowledgement was at frame 100 and stopped working the
day the state file arrived: the program had not reached the dock yet and
the press went by unheard, which shows up as every sprite missing and
reads like a drawing bug. Everything after it is sampled well clear of
both ends.

Two checks, each seen to fail on its own break - the alignment settles at
4,-8 without the shared origin, and the slide reads 0,-8 the whole way
without the easing. Which of the two axes each one actually watches is
written down beside them, because it is not the one you would guess.
2026-09-04 11:23:54 -04:00

133 lines
3.3 KiB
Plaintext

CosmOS
> monitor
x examine, d disassemble, a assemble, s set, b bank, g go, exit leaves
* b nonsense
b <program|data|number>
* b 9
there is no such bank
* load greet.sbx
loaded, starting at 5000
* b program
bank 00
* d 5000
5000 47 00 30 00 SETD.0 3000
5004 72 10 SWI 10
5006 47 00 30 44 SETD.0 3044
500A 72 10 SWI 10
500C 47 00 30 7A SETD.0 307A
5010 27 1F INIB 1F
5012 72 11 SWI 11
5014 47 00 30 5D SETD.0 305D
* x 5000
5000 47 00 30 00 72 10 47 00 30 44 72 10 47 00 30 7A G.0.r.G.0Dr.G.0z
5010 27 1F 72 11 47 00 30 5D 72 10 47 00 30 7A 72 10 '.r.G.0]r.G.0zr.
5020 47 00 30 65 72 10 20 72 12 00 00 00 00 00 00 00 G.0er. r........
5030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
* b data
bank 01
* x 3000
3000 61 20 70 72 6F 67 72 61 6D 2C 20 6C 6F 61 64 65 a program, loade
3010 64 20 6F 66 66 20 61 20 64 69 73 6B 2C 20 72 75 d off a disk, ru
3020 6E 6E 69 6E 67 20 6F 6E 20 74 68 65 20 73 79 73 nning on the sys
3030 74 65 6D 20 74 68 61 74 20 6C 6F 61 64 65 64 20 tem that loaded
* b 2
bank 02
* x 0
0000 01 FF 00 00 00 00 00 00 01 FF 00 00 00 00 00 00 ................
0010 03 FF 08 00 00 00 00 00 01 20 01 00 00 00 00 00 ......... ......
0020 00 FF 00 00 00 00 00 00 00 FF 00 00 00 00 00 00 ................
0030 00 FF 00 00 00 00 00 00 00 FF 00 00 00 00 00 00 ................
* s 0 FF
that bank will not be written
* b program
bank 00
* s 8000 26 48 D1 00 26 0A D1 00 18 12
* d 8000
8000 26 48 INIA 48
8002 D1 00 OUTA 00
8004 26 0A INIA 0A
8006 D1 00 OUTA 00
8008 18 SHR
8009 12 AND
800A 00 ?
800B 00 ?
* g 8000
H
that byte is not an instruction, at 800A
A 85 B 3F Q 05
the program was stopped
* d 8000
8000 26 48 INIA 48
8002 D1 00 OUTA 00
8004 26 0A INIA 0A
8006 D1 00 OUTA 00
8008 18 SHR
8009 12 AND
800A 00 ?
800B 00 ?
* b data
bank 01
* s 8100 68 65 6C 6C 6F 2C 20 74 79 70 65 64 0A 00
* b program
bank 00
* a 8200
8200: SETD.0 8100
8204: SWI 10
8206: lda.2
8208: LDD.0.1
820B: frobnicate
no such instruction
820B: INIA
that one needs a value after it
820B: SWI 12
820D: .
* d 8200
8200 47 00 81 00 SETD.0 8100
8204 72 10 SWI 10
8206 42 02 LDA.2
8208 4A 00 01 LDD.0.1
820B 72 12 SWI 12
820D 00 ?
820E 00 ?
820F 00 ?
* g 8200
hello, typed
finished
* exit
> dir
greet.sbx 211
hello.sbx 53
Life.sbx 1396
Snake.sbx 2164
Keys.sbx 664
Say.sbx 156
Break.sbx 149
Grid.sbx 571
Press.sbx 872
Mode.sbx 48
Flip.sbx 173
Sprite.sbx 442
Depth.sbx 672
Lander.sbx 6814
Pad.sbx 264
Crash.sbx 632
vars.script 50
blocks.script 343
loops.script 272
tune.sbx 306
notes.txt 21
Apps <dir>
hi.script 121
bad.script 45
plain.script 24
cross.script 280
nonl.script 38
outer.script 376
inner.script 44
loop.script 35
29 files, 1 directory
> exit
halted
Execution halted.
[exit 0]