2defbb49e211414b7ab3c04d6e30a8ceed84fe4f
76
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  AnachronautandClaude Opus 5
|
023362b05a |
A second screen, and one port to say which is shown
A screen drawn where it can be seen is seen half drawn. A program that moves forty things and rewrites the map underneath them is wrong for as long as it takes to put them all right, and at a megahertz that is long enough to look at. So the device brings a second screen bank, on port 0x3B, and port 0x3C says which of the two is displayed. Everything a program draws into the other one is invisible until one byte shows the whole of it at once. ONE REGISTER IS ENOUGH, where the hardware this imitates needed two. The other said which screen the CPU's window pointed at; there is no window here, because a program reaches a bank through the memory controller by its number. Writing to the screen that is not shown is a matter of naming its bank, and the device never has to be told. And a flip cannot tear: a frame is drawn from one bank in one go, so a flip either happened before that frame or happens before the next. There is nothing to race, where the real machines had to catch the few lines between frames to swap in. The console draws into whichever screen is displayed rather than one of its own, so a fault message lands where somebody can read it even if a game had flipped. And CosmOS puts the displayed screen back at exit, the way it already puts back the cursor and the ink: a program that faulted while flipped could not have, and a shell that only came out right for programs which remembered would come out wrong the day one crashed. Flip.asm is the worked example. It deliberately does NOT restore the display itself - that is the point of the paragraph above, and it is what makes the system's guarantee the thing under test rather than the program's good manners. Written the other way round first, where it passed with the guarantee deleted. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
66e7b84272 |
The screen is two banks: an atlas and a screen
Tiles and colours are written when a program loads; the map is written whenever anything moves. Sharing one 64K bank made them compete for room neither needed all of, and had a worse consequence than being cramped: a bitmap covers the whole bank, so entering bitmap mode destroyed the font. A program could not draw a picture and then say anything about it. Split, each gets a whole bank. The atlas holds the tiles and the palette, the screen holds the map or a bitmap, and a picture now costs the map and nothing else. It also leaves 48K free in the atlas, which is where the sprite table and a second page of tiles are going. No new mechanism was needed. A bank is registered by naming the port that owns it, so a device with two banks needs two ports that own memory: the base port keeps the atlas, since tiles have been at 0x0000 since there was a screen at all, and 0x3A owns the screen. The registry now answers honestly about which ports in the block bring memory, where it used to say all sixteen did. CosmOS never addresses video memory except in one place - the screen save, which walks 196 pages of it. The page number already says which bank a page is in, so screenBankFor works it out rather than keeping a second list beside screenPageFor. Grid and picture.asm register both banks; colours.asm only touches the palette and needed none of it. Tests/video.sh names the memory every write is for, because an address cannot: tile 5 and bitmap pixel 5 are both 0x0005, and a helper that guessed would be right for the tiles and silently wrong for a picture. And picture.asm gained a check, because this change broke it and nothing noticed - registering the second bank leaves DestBank pointing at it, so the palette went into the wrong one and the picture came out black. It was the only thing here found by looking rather than by a test. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
2abc8281df |
Loops, and the scripting language is a language
while and for. Both only mean anything in a script, because a loop goes back to the line that opened it and a prompt has no line to go back to - and both say so rather than doing something surprising. THE SCRIPT READER KEEPS THE POSITION OF EVERY LINE before reading it, which is what makes any of this possible: by the time a line has been read the reader is past it, and a line is not a fixed size to subtract. Three words per line, and the block is read again on the way back so the pointer into it means what it meant - the same thing nesting one script inside another already did, for a different reason. THE TWO LOOPS END DIFFERENTLY, and that is the design rather than an accident. A while is taken away at its end and its own line asks the question again, so nothing has to be remembered. A for is not: how many words it has used is kept in the block, and its line reads itself again and counts one more off the front. That is a byte in a block instead of a copy of the word list in every one of them. Blocks grew from a byte to a record of sixteen - state, kind, words used, and where the line that opened it was - and sixteen because A and B are a shift register, so four rotations turn a block number into its offset. The history and the variables are addressed the same way for the same reason. Nested loops, an if inside a loop, a loop inside a branch nobody takes, and a for with no words: the last two run no times rather than once, which is the case worth having a test for. Three things found by running it: textSame asks whether two WHOLE strings are the same, so "in red green blue" is not "in". The word has to be split off before it is compared. A for typed at a prompt complained about while, because both arrive at the same place. One message that names neither is better than one that names the wrong one. And docs.sh caught a naming convention nobody had written down: it recognises a packed name by its label ending in "Name", so ForName2 was silently not counted. It failed the right way round - saying the run was shorter than the count claims rather than passing - but the convention now lives where the names are and not only in the checker. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
16f8232a35 |
Lines that are only run sometimes
if, else, end, and same. IF TAKES A COMMAND, which is one rule rather than two and is why comparing values needs no syntax of its own: "same" is an ordinary command that fails when its two words differ, so "if same $a $b" falls out of the rule instead of being an exception to it. Anything else that can fail is a question too - "if load Snake.sbx" is a perfectly good one. The shell already had the other half. LineFailed exists because a script stops at the first line that did not work, so every command was already saying whether it had, for a different reason entirely. A BLOCK HAS TWO KINDS OF NOT-RUNNING. One where an else would turn it on, and one where it would not - which is what an if pushes when something above it is already being skipped. That is what makes nesting need no looking down the stack: the top of it says everything. A branch nobody is taking is not even looked at. The skipping happens BEFORE the names are filled in, so a variable mentioned in a branch that is not running is not an error - a line nobody runs must not be able to fail. AND LINES MAY BE INDENTED, which they could not be before there was anything to indent inside. Nobody writes an if inside an if without indenting what is in them, and a leading space used to make the first word empty and match nothing. Found by writing the test script the way anybody would write one. CALL commandFailed became BRI commandFailed in nine places. It never returns - it marks the line and branches to the prompt - so calling it was a lie that cost a Stack frame each time, and fourteen other sites already branched. THE LINT RULE FOUND THIS, three days after I wrote the rule and on my own code: two false positives that were really the linter being right about a CALL that is not one. It does not fix the leak on its own, since a failure inside any called routine still abandons that frame, but it removes the cause of the commonest case and makes the code true. The mechanical edit then left a BRI prompt stranded behind one of them, and the linter caught that too. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
a8707f29f0 |
Names for things
"set apps /Apps", and then "$apps" anywhere on a later line stands for it. A name stops where a name stops - letters and digits - so it composes into a path without anything having to be quoted, which is the whole reason a script would want one. THE SUBSTITUTION HAPPENS ON EVERY LINE THE SHELL IS ABOUT TO RUN, typed or read out of a file, so the two behave the same and no command below has to know that variables exist. Same shape as the line editing: one place the whole system already flows through, rather than a decision made twenty times. A NAME NOTHING WAS SET TO DOES NOT RUN THE LINE. Every other shell expands it to nothing, and that is the wrong answer here: a mistyped name would quietly become an empty path, which is the class of silent wrong answer the rest of this system spends its effort refusing. It says so and the line counts as failed, which stops a script - and the test proves that by running one, where the line after it must not appear. Somebody who wants an empty value writes "set name" and gets one, so the escape hatch exists and has to be asked for. A NAME TOO LONG IS AN ERROR RATHER THAN A SHORTER NAME. Cutting it off at fifteen characters was the first version, and it is the same fault wearing a different coat: two names differing only after the fifteenth would be one variable, and the complaint about a missing one printed a word nobody typed. Eight slots of sixty four bytes - sixteen of name, forty eight of value - and sixty four rather than eighty because A and B are a sixteen bit shift register, so two rotations turn a slot number into its offset. The same trick the history uses, and the reason neither needs a multiply this machine has not got. TWO THINGS I GOT WRONG AND ONE I FOUND: doSetVar ended in RET. It is BRANCHED to from the dispatch, not called, so that RET went wherever the Stack happened to point - the same fault that formatted a disk last week, in a command written three days after the rule was named. The new lint rule does not catch this shape: it fires on falling INTO a subroutine, not on a branch target that ends like one. And a test of the expansion's answer, which is dead code: commandFailed does not return. It marks the line and branches to the prompt, the way every failure in this shell is reported, so the only way out of the expansion is the one where it worked. Which turned up a real leak, measured and not yet fixed: every failure that goes through commandFailed abandons the frames between the prompt and the call. SP goes from FFFD to FE6D over twenty of them, twenty bytes each. Its own commit. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
b04e4b7d1c |
Finish making the tune a program
The user's conversion, which I reverted while I was working out whether it was half done or broken. It was half done: an sbx application wants its #Include above #Program, because services.asm ends in a #Vectors block and a #Base written after that has no segment to be the base of. So the include moves up, the bases move a page with everything else, and the test starts it from the shell instead of booting it. It plays for 9,469,987 cycles, 9,423,527 of them waiting, which is the same 567 frames of music it played as a boot image. BEING A PROGRAM MEANS ITS VECTOR IS THE SYSTEM'S TO INSTALL. It brings the screen's, so that it has a beat to play to, and CosmOS puts it in when the tune starts and takes it back out when it stops - a thing a boot image never had to have right, and the second program here to exercise the version two format at all. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
3449405b18 |
Give the system another page of each memory
CosmOS had 1,161 bytes of Program Memory left before the address applications load at, and Tab completion is not going to fit in that with anything to spare. So the wall moves up one page: the system keeps below 0x4FFF and 0x2FFF, and an application is based at 0x5000 and 0x3000. A PAGE IS A CHEAP THING TO GIVE IT AND AN EXPENSIVE THING TO RUN OUT OF. An application still has 44K of Program Memory before the vector table and the largest one here uses 7.5K, so what was taken from applications is space nothing has ever asked for - while what the system gained is the difference between building the next thing and counting bytes while building it. Not doubling, which was the version that would have cost application space worth minding. One page, and the same again when it is needed. Nothing in the machine knows where the wall is, so this is 34 #Base lines, one threshold in the fault handler, and the table in the CosmOS README that Tests/docs.sh reads its limits out of. The native assembler's scratch map had to move with it, and docs.sh said so before anything ran: its data reached 0x40D6 and its buffers began at 0x4000, so they were sitting on its variables. That file already carries a paragraph about the floor coming up and the map staying where it was. It has happened twice now, and been caught by a check the first time wrote. Twenty three recordings are the same runs a page higher. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
fd9c4c75f8 |
Tell the person where it hurts
A fault stopped the machine and printed a line to standard error. On a terminal that is a diagnosis. Behind a window it is a frozen picture and no reason at all, because the message went somewhere nobody was looking - the machine looked hung and was not. It had stopped, and said so invisibly. CosmOS catches all five faults now and says what happened on the screen, with the address, in red. A FAULT ENDS THE PROGRAM, NOT THE MACHINE. That is the answer to "carry on or start again", and it is not a compromise: a bare RETI from most of these meets the instruction that failed and fails again, so carrying on was never on offer. But the machine is almost never what is broken. Everything the shell puts back when a program exits - the Stack, its vectors, the drive, the working directory, the console, the screen - is exactly what wants putting back after one dies, so the handler sets a status and joins handleExit. You are back at the prompt, and the program is recorded as having STOPPED rather than finished, because saying "finished" under a red fault message would be the shell contradicting itself. A fault below where programs load is the system's own, and there is nothing to go back to. That one says so and stops. THE SCREEN GOES BACK TO A MODE TEXT CAN BE SEEN IN, and that is the part that matters rather than the part that is prettiest. A program that faulted in bitmap mode left the console with no text rows, so it draws nothing at all: the message would be perfectly correct and completely invisible, which is the one thing it must never be. Two palette entries go back for the same reason, since a program that wrote its own colours can leave every ink the same as every paper. Only the two the message needs, so the rest of what the program chose is left alone. Both halves are checked by looking at the PICTURE, because the serial line was never where the problem was. Crash blind ruins the palette and drops into bitmap mode before it faults; without the mode the screen comes back 320 by 200 with nothing on it, and without the palette it is the right size with the message present and unreadable. Each break loses the red on its own. Crash is also a program worth having: it breaks in whichever of the five ways you name, so a fault screen can be looked at without having written a bug first. Two things found on the way: The native assembler keeps its OWN copy of the reserved vector names, so it did not know NoHandler or NoDevice and built a cosmos.bin that differed from the host assembler's. Caught by native.sh, which is exactly the drift that test exists for. And cosmosMonitor had dead input. It assembles code into 0x8000 and runs it, and that code faults - which used to kill the machine, so everything after it in the file had never run. It runs now, and the recording grew by sixty lines of monitor session that had been unreachable since the day the fault was put there. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
81e544eb3d |
Load a program that has no data
A five instruction program that writes one port and exits has no Data Segment at all, and the loader stopped the machine dead on it. It asked the memory controller to move a segment of no bytes, and a length of zero asks for the whole 64K - which is the machine's rule, and a reasonable one, since two bytes cannot say 65536 and a transfer of nothing is not usually what anybody meant. It is exactly what was meant here. 64K did not fit, the controller refused, and the load stopped half done. ON A TERMINAL THAT PRINTS A FAULT WITH AN ADDRESS. Behind a window it is a frozen picture and no reason at all, which is how it was found and is a separate problem from this one. The header says how long each segment is, so the loader knows before it asks. Both bytes are already in hand, so the test costs one OR. Nothing is lost by skipping the transfer: a blit leaves the controller's addresses past whatever it touched, and a blit of nothing would have left them where they already are, which is where the vectors are read from next. Guarded for the code segment too. A program with no code is equally assemblable and would have stopped in exactly the same place. Mode.sbx is the fix's test and a program worth having on its own: forty columns or eighty, whichever the screen is not in, which is what a person wanting Snake drawn twice the size actually needs. Ten instructions and no data, deliberately - it prints its two digits a register at a time rather than from a string, so it stays the smallest shape a loadable program can take. Nothing else on that disk had ever been that shape, which is why nothing had ever tried it. Reported by the user, who wrote the program. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
736037462e |
The shell edits the line it is given
Three different things used to do this job, and which one you got depended on where the machine was running. On a terminal the host held the line and did the echoing and the backspacing; behind a window the console's own gatherer did it; from a file nothing did it at all. One job, three implementations, none of them in the system - which is why there was no way to move about in a line and nowhere for a history to live. So editLine does it. Key mode while a line is being read and line mode straight after, so nothing else in the system and no program calling osReadLine notices anything changed. Left and Right, Home and End, Backspace for the character before the cursor and Delete for the one under it, and anything typed goes in where the cursor is with the rest of the line moving along. Ctrl-D means the end of input again, on an empty line, because that was a thing the terminal did while it was holding the line and it is not holding it now. Same trade as the echoing. MOST KEYSTROKES DRAW NOTHING BUT THEMSELVES. A character typed at the end of a line needs no cursor moved: printing it is the whole change, and a backspace there is three ordinary bytes. That matters beyond speed - moving the cursor by hand is what a terminal is TOLD about, in an escape sequence, so redrawing on every keypress would fill every recorded transcript in this suite with them. The line is only reprinted when something happened in the middle of it. Where the line STARTS is worked out backwards from where printing ended, rather than trusted from what was remembered. That is what makes it survive the screen scrolling: a line printed on the bottom row moves everything up by one, and a remembered row would be one too low from then on. The command line holds 127 characters, up from 63. The limit started to be felt the moment a line could be moved about in. 58 recordings changed, and every one of them by the echo. THE PROOF IS NOT A HEURISTIC: a CosmOS built with the echo silenced reproduces 187 of the 188 recordings byte for byte. The one exception is cosmosTyped, the backspace test, where the rub-out marks now come from the shell instead of from the console's gatherer - same marks, different author. cosmosEditKeys is the new test, and every line in it is typed wrong and then corrected with a different key. Its last line is eighty six characters at a prompt in column two on an eighty column screen, so the line runs onto the row below and the shell has to find the start of something it can no longer see; breaking either half of that arithmetic fails it. Also: agree.sh looked for "> the same", anchored to a prompt that no longer precedes what a command prints. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
b3726c950a |
Deliver the keys that are not characters
An arrow key has never reached this machine. Voyager threw it away for want of anywhere to put it, and a terminal sent ESC [ A, which arrived in the middle of whatever was being read and made it unrecognisable - typing Up at the CosmOS prompt put three bytes in the command line and got "I do not know". So the console names them: one byte each, 0x80 upward, above ASCII so nothing written before them can collide. Up, Down, Left, Right, Home, End and forward Delete, with room above for the paging and function keys. The console normalises, which is what it already does. Behind a window it turns the key somebody pressed into a byte; on a terminal it turns the sequence into the same byte. That is the act it has always performed on Return and Backspace, one layer further along, and it is why a program need not know which of the two it is talking to. What a key MEANS is not the console's business - that belongs to whoever is reading, the same way what is on a disk belongs to the system and what a drive is belongs to the machine. Translated only when standard input really is a terminal. Nothing else sends these sequences, a pipe holds exactly the bytes somebody put in it, and it keeps the Escape-or-Up timing problem out of every test here: a test writes the key values themselves. Line mode drops them, in both front ends, because line mode delivers characters and a line somebody else has finished editing cannot be moved about in. Press.sbx says what it was handed, in hexadecimal and by name, and reads a line before it reads keys so both halves of that rule are checked. Two recordings, one fed as standard input and one as a keyboard, agreeing byte for byte; each break fails exactly one of them. Three checks in terminal.sh type real escape sequences at a pseudo-terminal, which is the only place they are ever read as sequences: that they arrive as keys, that Escape alone is still Escape, and that a character typed straight after an escape is held rather than swallowed. Five recordings re-blessed for Press.sbx appearing on the shared disk, and the whole of that diff is the file's own line and the counts above it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
2a29cebc6b |
Make the screen come back on the machine people actually run
Found by running it: Grid exits and the shell prints its prompt into the grid, with the view up to seven pixels out of alignment. Three faults, and the first is the one that made the other two visible. MAKE RUN-VOYAGER HAD NO SCRATCH DRIVE. It gives drive 1 to Disks/personal.img, which is a file and not volatile, so there was nowhere to keep a screen - osTakeScreen answered no and the whole feature silently did not happen. It was tested with --ram-disk and shipped without one, which is as good a description of testing the wrong machine as I can write. There is now a RAM disk in drive 2, after the personal disk so that drive 1 stays the one that is yours. A PROGRAM TOLD NO MUST COPE. A refusal is not a fault, it means doing what the program did before there was anywhere to save a screen. Grid deleted its own tidying up when it started asking, so being refused left the grid on screen with a prompt written into it. It clears up again when refused, and only then. AND THE SYSTEM ALWAYS LEAVES THE SCREEN USABLE. The fine scroll registers go back to zero at every program exit, whether or not the picture could be saved: the console draws in whole cells, so a view three pixels into one puts every character three pixels out for ever. That is not part of saving a screen and should never have depended on it. Both paths are checked now. With a scratch drive the screen comes back cell for cell; without one, no grid is left behind. Breaking either fails one of them and not the other. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
ab72443b99 |
Give the screen back: osTakeScreen, and the RAM disk earns its keep
A program that takes the whole screen leaves the shell a blank one, and
whatever was on it is gone. There was nowhere to put 48K of video memory on
a machine with 64K of Data Memory that CosmOS already lives in.
A DRIVE MADE OF MEMORY IS SOMEWHERE. The screen goes to a file on the
scratch drive - the first volatile drive found at boot - like any other
file, and comes back from handleExit alongside the vectors and console mode
already put back there. The filesystem does the allocating, so this
invented nothing: it is 196 pages of tiles, map and palette, with a block
on the front holding the cursor, the four scroll registers and the mode.
NOT AUTOMATIC, and that is the whole design. Saving on every program start
would be cheap enough; restoring on every exit would be wrong, because dir
and Files and Say print and stop and their output is the reason you ran
them. A program says it took the screen, and one that says nothing behaves
exactly as every program did before this existed.
It deleted thirty lines of Grid, and they were all wrong anyway: four
scroll registers put back by hand, the map filled with spaces, the cursor
sent home, palette bank 0 written out - and the other fifteen banks kept
Grid's colours, because there was nowhere to have kept the real ones. Grid
is 64 bytes smaller and gives back what was actually there.
The check compares the screen before against the screen after, CELL BY
CELL, and allows only the rows around the cursor to differ - found from
where the text ends rather than guessed at, because the first version
assumed the cursor was near the bottom of the screen and let three real
differences through.
Two things cost time and neither was the feature:
- An edit adding "SWI osTakeScreen" to Grid was in the same script as a
failing s.index, so the file was never written - and the COMMENT
describing the call did land, from a later edit. Grid documented a call
it did not make, and read as though it should have worked.
- docs.sh caught osTakeScreen having no row in the services table, which
is the check the service layer added for exactly this and the second
time it has earned itself.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
e4f4bae762 |
Work across two disks: copy between them, and run a program from one on
files from the other Two things anybody expects of a second disk, and each needed something different. COPYING NEEDED TWO THINGS TO REMEMBER A DRIVE. The write stream is the only thing here that lives across service calls, so it is the only thing whose drive can change underneath it: every osFileBlock names its source path again and goes back to the source drive, and then osFileWrite has to come home. It records the drive it was opened on and returns there. And the file lookup CACHE. It keeps the last path resolved so a reader walking a file does not re-walk the directory for every block - and skipping the walk skipped the drive the path named, so block one of a cross-drive copy read the source's block numbers off the DESTINATION disk. It only showed on files of more than one block, because a file of one is never looked up twice. One block worked and two did not, which is a suspicious enough shape to have suspected sooner. RUNNING A PROGRAM FROM ELSEWHERE NEEDED A THIRD PLACE TO LOOK, and two restorations. The shell tried where you are and /Apps on the disk you are on. It now tries /Apps on drive 0 as well, which is what makes the system's programs work from a disk of your own - one with your files on it and no system, which is most of the point of having a second disk. The drive goes back after the load, because by then the program is in memory and the blocks it came from mean nothing; and again when it exits, because a program that copies between disks moves the drive as its own paths need to and being left wherever it finished is not what was asked for. Copy 1:/a 0:/b now leaves you exactly where you were. The fixture disk grew an /Apps, because it kept its programs at the root and so could not exercise the third place at all. Two hours of the debugging above were spent on a stale disk image. The machine boots the system that is ON the image, so a rebuilt cosmos.bin means nothing until the image is rebuilt too - and the trace said my new code never ran, which was true. Third time this project has been misled by one. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
3b650cabcd |
Grid took the disk's bank number, and gave the screen back untidy
Found by playing with it: after running Grid, the shell could not start anything by name and dir said the disk was empty. Several commands after the program that did it had exited, and nothing had said a word. BANK NUMBERS ARE ONE NAMESPACE FOR THE WHOLE MACHINE. Grid registered video memory as bank 3, which is the number CosmOS gives the disk's buffer when it mounts - and that does not fail, it succeeds. Every read the filesystem made afterwards came out of video memory. Grid uses 4 now, and the CosmOS README has a table of who owns what, because the one place this was written down was a line in a service description about sbfsMount. Nothing hands bank numbers out and nothing refuses one that is taken. If programs start wanting banks routinely, a service that allocates them is what should exist rather than a longer table - noted there rather than built, since one program wanting one bank is not yet a system. Also puts the cursor home on the way out. The map was emptied and the console was not told, so the shell carried on writing from wherever the cursor had been standing when Grid started - twelve rows down a screen with nothing on it. Clearing is what homes a cursor and it costs one write. The regression test runs a program by name, then Grid, then the same program again; the second one is the check. Putting Grid back on bank 3 fails it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
bcd42e75ca |
Scroll the screen sideways, and by less than a cell
The screen could move one way, a cell at a time. Three registers were missing and this adds them: a column origin so the map can be wider than the screen as well as taller, and a pixel remainder for each axis so the step can be one pixel rather than eight. 0x36 Scroll column, in cells, wrapping at 128 0x37 Fine X, 0 to 7 pixels 0x38 Fine Y, 0 to 7 pixels FINE DOES NOT CARRY INTO COARSE. Writing 8 to a fine register writes 0, because only its low three bits mean anything. The alternative was for a write of 8 to step the coarse register, and it was rejected for one reason: a program that scrolls has to know where it has got to, and if the hardware carries then the only way to find out is to read the register back. Keeping them apart means the program already knows, because it did the arithmetic itself. It is also what the machines this one is pretending to be did. The renderer now draws one more row and one more column than fit and clips them, because with a fine offset the screen no longer begins on a cell boundary and the cells at two edges are partly off it. videoPutCell follows the column origin as it has always followed the row - a caller means a cell of the SCREEN, and the screen is a window onto the map. The fine offsets are deliberately not applied there: they move the finished picture by less than a cell, and there is no such thing as less than a cell to write into. So a program may scroll to any pixel without the console's idea of where row three, column five is moving underneath it. Grid now scrolls diagonally, a pixel a frame, in four port writes and two carries. It moved eight pixels every fourth frame before, which reads as the picture jumping rather than travelling. Seven checks, each one the same program with one register changed, so what is compared is where the picture stopped. Breaking fine X, fine Y, the column origin, the three-bit mask, or the console's use of the origin each fails exactly one of them. Grid's own two checks had to be rewritten, and the reason is worth keeping: they asked whether pixel 4 was a grid line, which was really a check that the scroll happened to be at a cell boundary. A picture that moves a pixel a frame can only be asked things that are true at every offset - that it repeats every eight pixels, and that one band of eight rows holds different colours from the next. Also repairs docs.sh, which found the minimal CosmOS application by taking the first asm block in the README. Documenting a program with an example above it made that a different block, and the check complained that the minimal application had no #Base about something that never claimed to be one. It looks under System Services now. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
1a8a5efe03 |
Grid: the first program to use the screen as a screen
Everything drawn on this machine so far has been text or a bitmap. The tile
engine has been there since the screen was built and only the console had
touched it, and only ever to put a letter in a cell - the one thing it can
do that a plain character display could do too.
Grid redefines a tile, fills all 128 map rows with it, and scrolls by
writing ONE BYTE A FRAME. Nothing moves. The rows above and below the
screen are already drawn, so a screenful of movement costs one OUTA and the
rows that leave the top are still there.
Its tile goes at 200 because the machine wakes with the font in tile memory
- glyph n at tile n, for 135 of the 256 - so a program starting at zero
paints over the alphabet and the shell it is about to hand the machine back
to. Its sixteen colour bands are one tile and not sixteen: the attribute
nibble is added to every index in a cell, so the same 64 bytes come out in
sixteen colourings.
Three things it cost, all of them the same lesson about this machine:
- "SETD.0 X" then "STD.0.1" stores through DP1, which had not been set
yet. It assembles, and the blit then reads its 64 bytes from wherever
DP1 was last left, so the tile came out as noise.
- The palette entry for scheme n is at 0xFC00 + 64n, which reaches
0xFFC0 - four pages, not one. And doubling A by adding B needs B to
hold A, which RSTB is the opposite of. Both went away by writing all
256 entries in order and letting the controller step the address, so
nothing computes an address at all.
- The screen it hands back had the right cells and the wrong colours,
because restoring the map is not restoring the palette.
That last one is a gap in the machine rather than in this program, and is
written up in the CosmOS README. The console's colours live at exactly the
entries the attribute nibble lands on, so any program using the nibble
overwrites them and has nowhere else to write. Grid puts bank 0 back - grey
on black - and leaves the other fifteen. The real answer is a command to
the screen meaning "give me back what you woke up with", the way the
console has one for clearing. There is not one, and this is the first
program that ever wanted it.
Two checks in video.sh, which boots the whole system and reads the pixels
the renderer produced rather than trusting what the program believed.
Breaking the tile fails one and breaking the attribute fails the other.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
c28826df77 |
Let a script run a script, four deep
A build script calling a setup script is the first thing anybody tries. What is saved when one script starts another is A POSITION AND NOT A BUFFER: the name, which block comes next, how many are left, and where in the block it had got to. Seventy bytes, and they sit next to each other in the data segment on purpose so that saving them is one copy. The block itself is read again on the way back, which costs one disk read per return and saves 257 bytes a level - the inner script reads its own block into the single buffer there is, so coming back means fetching the outer one's block again and landing on the byte it left. The slot is reached by stepping rather than by multiplying, because this machine has no multiply and the depth is never more than three steps. Four levels. Deep enough for a script calling a script that calls a helper, shallow enough that a script running itself says so rather than filling memory. A line that fails now stops every level and not just the innermost, because a build whose helper failed should not carry on in its caller. The caller's place is saved BEFORE the new file is looked at, and put back on every way out that is not success. Opening writes the name into the live state in order to ask the disk about it, so by the time "there is no such file" is known, the caller's place has already been overwritten - a failed 'do' inside a script would otherwise leave the script that ran it reading from a name it never chose. The test resumes in the outer script's SECOND block, which is the case the whole design turns on and the one an ordinary nesting test would miss. Breaking the re-read, the save, or the limit each fails it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
a12d61fb80 |
Give the shell an echo, so a script can say what it is doing
Say.sbx has printed words since long before there were scripts, and is the wrong shape for one. It is a program: it has to be found on the disk, loaded and started, it prefixes what it was told with "it says:", and the system prints "finished" after it. Three lines of noise around one line of narration, and a load off the disk to produce them. echo is a command, so it costs a comparison. With nothing after it, a blank line - which is what anybody expects and is worth having to space a long script out. Not called "say", although that is the better word. Built-in commands are tried before the disk and always win, so a built-in say would shadow Say.sbx and quietly change what every existing script and test meant by it. Also puts "do" in the help, which the commit that added it forgot, and splits the help text: the new lines pushed it over the assembler's 255 character limit for one string. That failure was hidden for a few minutes by a 'make' whose errors were going to /dev/null - the build kept the disk it already had, and the machine cheerfully reported "I do not know: echo" from a system assembled before echo existed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
2466d79d9c |
Let the shell run a file of commands
'do <file>' runs the lines in a file as though they had been typed. The
only thing a script changes is where the next line comes from: everything
below shellReadLine - splitting the line, matching it, loading a program -
cannot tell the difference and does not have to.
What makes a file a script is '#!' on the front of it, not its name and not
a flag in its entry. The rule this filesystem keeps is that an entry holds
only what the content cannot say about itself, and a script can say what it
is; the loader already refuses anything that is not SBEX, so the two kinds
of runnable file turn each other away without either knowing about the
other. It is also the deferred half of the file-typing design, which said
to wait for a second kind of runnable thing before building any of it. This
is that second kind.
'#' is a directive and ';' is a comment, as in SplitBit assembly - one rule
across the machine rather than two dialects. Not Unix's convention: there
'#!' really is a comment that only the kernel reads, while here the shell
requires it and refuses the file without it, so calling it a comment would
be a lie about what it does.
A script stops at the first line that does not work, which is what the
LineFailed groundwork was for. Comments and blank lines are dropped by the
reader rather than by the dispatch, so they are not echoed either. A script
running out hands back to the console rather than ending the shell, because
running out of file and running out of typing are not the same thing. The
interactive assembler reads through the same path, so a script can contain
a block of assembly.
Three things this cost that were not obvious:
- RET puts A and B back, so a routine cannot answer in them. scriptByte
returning the character in A assembled, ran, and handed the caller its
own A back every time. It answers in memory now.
- A last line with no newline is still a line. Text files do not reliably
end with one and an editor eating it is a bad way to find out a command
did not run.
- Not LastStatus. See the commit before this one.
Six checks in three tests, two of which are about byte positions rather
than behaviour - a command lying across the boundary between two blocks,
and that missing newline - so their fixtures are generated rather than
committed, where an editor cannot helpfully repair them.
Nesting is not in yet: a script cannot run a script. That wants a stack of
positions rather than the one the reader keeps.
Also derives native.sh's self-hosting source list from cosmos.asm's own
#Include lines. It was a hand written list and went stale the moment
script.asm existed - the fourth time a list beside a thing has drifted from
the thing - so it now asks the thing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
310804e267 |
Give Snake back the speed its comment promised, and present in step with the display
Two things, one certain and one likely. THE CERTAIN ONE IS NOT THE WINDOW'S FAULT. Snake's pause loop said "at the emulated rate this is about an eighth of a second", and it was, when a cycle was one instruction. A cycle became one memory access, every loop in the machine got dearer, and this one silently doubled: the game has been running at half the speed it documents ever since, in a terminal as much as in a window. Measured rather than guessed - the inner loop is a DECA and a BNA, one byte and three, so four cycles a turn, and a whole run went from 3,848,610 cycles to 1,920,504 when the outer count came down from 256 to 122. Almost exactly half, which is what the arithmetic said it would be. That is the cost model change reaching a program nobody thought to re-measure. Worth looking for others: any loop tuned by eye before that change is running at half its intended speed. THE LIKELY ONE is the frame limiter. Without the vsync hint, Raylib sleeps towards sixty frames a second on its own clock, which beats against a display refreshing on its own - frames shown twice or skipped, and the machine handed an uneven number of cycles each time, since it takes its budget from the wall clock. The hint puts presentation in step with the screen. SetTargetFPS stays for a driver that ignores it. Snake is one byte bigger, because RSTB became INIB. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
43a05b3df1 |
Replace the escape parser with cursor registers
The console had grown an ANSI parser, and that was the wrong shape. ANSI exists because a screen used to be on the other end of a serial line and a byte stream was the only channel there was. This screen is memory the program can already address, so reaching it by sending characters for a state machine to take apart is a middleman for something the machine does better - and it meant accepting an open protocol somebody else defines, in hardware, with no natural end to it. Everything else on this machine is registers. So the console gets three: cursor row at 0x03, cursor column at 0x04, and a command port at 0x05 where 1 clears the screen. Both cursor registers are READ as well as written, which is the thing an escape cannot do without sending a query and parsing a reply - a routine that wants to put the cursor back where it found it can now ask. Clearing is one command against a thousand cells walked one at a time. Snake and Life are smaller for it: 2,168 bytes to 2,163 and 1,410 to 1,396. A HOST TERMINAL STILL SPEAKS ANSI, and bridging to the host is the emulator's job, the same job it does reading standard input. So the escapes are now GENERATED, outbound, for the set this device chooses, rather than parsed inbound as though the machine were a terminal. The set cannot grow behind our backs because we are the ones saying it. The cursor is announced lazily, at the next character rather than at the register write, so setting a row and a column costs one sequence rather than two. The console's block widens from three ports to six, which registryTest noticed: it had been asking about port 0x05 precisely BECAUSE nothing was there, and the console had just moved in. Re-blessing it would have left it checking nothing, so it asks about 0x80 instead - clear of the console, the disk, the screen, the controller, and the sound device coming to 0x40. Six checks in Tests/video.sh swapped from the sequences to the registers, including that the cursor reads back and that one sent past the edge is clamped rather than refusing. Those checks also stopped counting bytes from the ends of a file, which had quietly started measuring an escape the moment the console began announcing the cursor. SplitLint caught the one thing worth catching in the port: the clear command leaves A at 1 and key mode is also 1, so the second load looks redundant. Acting on it would tie a console command to a console mode by coincidence, and break silently if either ever moved, so it is suppressed with that reason rather than removed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
Anachronaut
|
87d819847e |
A program can say how it went
SWI osExit takes a status in A, and the shell keeps it. Fifty eight exits across twenty three programs now say deliberately whether they worked: 25 did what they were asked, 24 did not, 9 were asked wrongly. Compare is the exception and says so - one there means the files differ, which is a result rather than a failure, the way diff has always had it. IN A RATHER THAN Q, which is not a departure from the rule that a service answers in Q. This one takes an ARGUMENT, the way osPrintNumber takes A and B, and it never returns to answer anything. A is free precisely because a return would have put it back - and Q is the ALU's output, so a small number costs four instructions there against one in A. The shell does not print it. A program that failed has already said so in words and a number beside that is noise, so osLastStatus hands it back and Status is the program that shows it. That indirection is the point: the number exists for the thing that cannot read words. MARKING THE EXITS FOUND A DEFECT ON THE FIRST RUN. Type and More printed why they had failed and then fell through into the success exit, reporting that all was well. Nobody had noticed, because while the only reader was a person, the person could see both the complaint and the claim. Two smaller things. Snake sets the console to line mode and then exits with zero, and the linter flagged the second RSTA as redundant - an exit status and a console mode, equal by accident, which is the class that must never be collapsed. And the README still taught answering by writing into the frame, three months of habit that SRET replaced yesterday; that section is gone and the one describing SRET stands in its place. |
||
|
Anachronaut
|
9c144469b4 |
Take the SplitLint findings that are one operation, leave the rest
Twenty four more sites, and the interesting part is which ones were left alone. A rule emerged while reading them and it held all the way through: apply where the repetition is INSIDE one operation, skip where the author's own structure says it is a new thought, and never where two equal values mean different things. Taken: - Five registers reassigned to a value they already held, where both are the same quantity: two masks in one expression in Snake, two spaces printed by the monitor, both halves of block zero in waitTest, and a RSTA in Pour that the very next instruction overwrote. - Eighteen SETDs that reload a pointer inside one operation - a store back into the variable just read, or an INCD stepping to the second byte of a two byte value. Those read correctly without the reload. - sbfsNext, which branched to the label on the line below it. Left, with reasons that are the useful part of this: - Eight registers where the same number means two different things. CosmOS and the loader set A to 1 for a blit command and then to 1 again for a bank number; Asm compares a type against 3 and then a status against 3. Removing those couples one quantity to another that is equal by accident and would part company silently. - Ten RSTAs that open the RSTA/RSTB/CCF/ADD "return zero" block. The redundancy is what makes that idiom self contained; taking it out makes the return value depend on the line above. - Eleven SETDs that begin an arm of a comparison chain. Each arm loads, compares and branches, and they get reordered - the repetition is the reason a new arm can be dropped in anywhere. - Twenty five SETDs separated from their pointer by a blank line or a comment, which is the author saying a new thought starts here. - Two CCFs before arithmetic, which this codebase writes unconditionally. - Three redundant branches in test programs whose recorded output includes addresses, where three fewer bytes moves what the test demonstrates. Nine recorded outputs moved and every one is a size in a listing or, for Life, five more generations inside the same cycle budget. Behaviour is unchanged everywhere: cosmosSnake and cosmosEdit pass byte for byte while Snake loses eight bytes and Edit twelve. CosmOS is 10,902 bytes of program against 10,937, and the native assembler 12,173 against 12,183. The CosmOS README's size for Edit moved twice in one sitting, and this morning's check caught it both times - which it could not have done before that claim was reworded to name what it was about. |
||
|
Anachronaut
|
e1273337c4 |
Two mechanical fixes SplitLint found: MVQA, and RSTA for zero
Twenty four places moved Q into A or B by pushing it and popping it back. That is four bus cycles and two bytes to do what MVQA does in one of each, and several of them are inside loops - Life, the calculator, int8. Nineteen more loaded zero with INIA 0d0 where RSTA says the same thing in one byte. Both are equivalent at the CPU rather than by assertion: RSTA and INIA both leave Status alone, and PSHQ followed by POPA nets to A = Q with the Stack Pointer where it started. The one difference is that the pair leaves a copy of Q in memory just below the Stack Pointer and MVQA does not, which nothing here reads. Five recorded outputs moved and every one of them says the change worked: - 16x16Life fits five more generations into the same cycle budget, the first 457 lines identical, because the loop got cheaper. - Life.sbx is 1409 bytes rather than 1411, in three tests that list it. - Edit.sbx is 1995 rather than 1996. That last one broke a check I added this morning, and the hole is worth recording: the CosmOS README's claim about Edit's size did not have the word "Edit" on the same line as the number, because the subject was in the sentence before, so the check that measures quoted sizes skipped it silently. The sentence now names what it is talking about, which makes it both checkable and clearer, and the check fails on a wrong number there. Comments on either half of a replaced pair are carried onto the instruction that replaces them, so nothing anybody wrote was lost. |
||
|
AnachronautandClaude Opus 5
|
d4cba36c5e |
Devices that take time, and a filesystem that waits for one
The disk's status has always had a bit meaning "still going", and the header beside it has always said to honour it. Nothing did, because nothing could: the host finished the transfer inside the instruction that asked for it, so the bit could never be seen up and asking about it was asking about something that cannot happen. --disk-cycles gives it a latency. The command is still checked at once, because a refusal is not work - a block that is not there fails before any head moves - but the transfer is remembered and done when the machine has run that far. Until then the buffer holds the block BEFORE this one. That last part is the point. A program that does not wait gets the wrong bytes rather than an error, which is the failure the bit exists to prevent and the one that would never have shown up. With a latency of two thousand, CosmOS could not even mount: sbfsMount reads block zero and looks straight at the buffer. deviceTick is the general shape rather than a disk feature. Called once per instruction with the machine's clock, it lets anything whose moment has come finish - which is what a display that refreshes, or a port that waits on the host, would want in exactly the same way. The filesystem watches the bit now, in one small routine reached with RCAL. That is not decoration: what it hands back is the settled status in A, and CALL puts A back the way it found it, so an ordinary call cannot carry the one thing this exists to carry. Two bytes of Stack rather than ten, in a routine that runs on every block the machine ever touches - the first place in the system where the new call is the right one rather than merely a cheaper one. The manifest takes a @N after a disk, the way it already takes :ro, so a test can ask for a slow one. cosmosSlowDisk lists a directory at two thousand cycles a block and gets the same listing as everything else, which is the whole assertion: a filesystem that did not wait would print nonsense rather than fail. Zero is the default and every other test runs at it. What waiting costs, on a directory heavy run: 229k cycles at zero, 275k at five hundred, 415k at two thousand, 1.16M at ten thousand. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |