CosmOS had 1,161 bytes of Program Memory left before the address applications
load at, and Tab completion is not going to fit in that with anything to spare.
So the wall moves up one page: the system keeps below 0x4FFF and 0x2FFF, and an
application is based at 0x5000 and 0x3000.
A PAGE IS A CHEAP THING TO GIVE IT AND AN EXPENSIVE THING TO RUN OUT OF. An
application still has 44K of Program Memory before the vector table and the
largest one here uses 7.5K, so what was taken from applications is space nothing
has ever asked for - while what the system gained is the difference between
building the next thing and counting bytes while building it.
Not doubling, which was the version that would have cost application space worth
minding. One page, and the same again when it is needed.
Nothing in the machine knows where the wall is, so this is 34 #Base lines, one
threshold in the fault handler, and the table in the CosmOS README that
Tests/docs.sh reads its limits out of.
The native assembler's scratch map had to move with it, and docs.sh said so
before anything ran: its data reached 0x40D6 and its buffers began at 0x4000, so
they were sitting on its variables. That file already carries a paragraph about
the floor coming up and the map staying where it was. It has happened twice now,
and been caught by a check the first time wrote.
Twenty three recordings are the same runs a page higher.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
Three different things used to do this job, and which one you got depended on
where the machine was running. On a terminal the host held the line and did the
echoing and the backspacing; behind a window the console's own gatherer did it;
from a file nothing did it at all. One job, three implementations, none of them
in the system - which is why there was no way to move about in a line and
nowhere for a history to live.
So editLine does it. Key mode while a line is being read and line mode straight
after, so nothing else in the system and no program calling osReadLine notices
anything changed. Left and Right, Home and End, Backspace for the character
before the cursor and Delete for the one under it, and anything typed goes in
where the cursor is with the rest of the line moving along.
Ctrl-D means the end of input again, on an empty line, because that was a thing
the terminal did while it was holding the line and it is not holding it now.
Same trade as the echoing.
MOST KEYSTROKES DRAW NOTHING BUT THEMSELVES. A character typed at the end of a
line needs no cursor moved: printing it is the whole change, and a backspace
there is three ordinary bytes. That matters beyond speed - moving the cursor by
hand is what a terminal is TOLD about, in an escape sequence, so redrawing on
every keypress would fill every recorded transcript in this suite with them.
The line is only reprinted when something happened in the middle of it.
Where the line STARTS is worked out backwards from where printing ended, rather
than trusted from what was remembered. That is what makes it survive the screen
scrolling: a line printed on the bottom row moves everything up by one, and a
remembered row would be one too low from then on.
The command line holds 127 characters, up from 63. The limit started to be felt
the moment a line could be moved about in.
58 recordings changed, and every one of them by the echo. THE PROOF IS NOT A
HEURISTIC: a CosmOS built with the echo silenced reproduces 187 of the 188
recordings byte for byte. The one exception is cosmosTyped, the backspace test,
where the rub-out marks now come from the shell instead of from the console's
gatherer - same marks, different author.
cosmosEditKeys is the new test, and every line in it is typed wrong and then
corrected with a different key. Its last line is eighty six characters at a
prompt in column two on an eighty column screen, so the line runs onto the row
below and the shell has to find the start of something it can no longer see;
breaking either half of that arithmetic fails it.
Also: agree.sh looked for "> the same", anchored to a prompt that no longer
precedes what a command prints.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
A screen with nothing on it and a cursor half way down it is not a cleared
screen: the next thing written lands where the last thing happened to leave
off, at a position whose meaning was just erased. The shell's clear did
exactly that, and left the next line one row below wherever it had been.
Both halves were missing. consoleClearScreen blanks the cells and does not
touch cursorRow or cursorColumn, and 2J on a terminal empties the screen
without moving anything - H is what puts the cursor at the top.
Life and Snake never showed this because they follow their clear with an
explicit 1;1H of their own. They were working around it, which is why the
bug survived until a command cleared the screen and then let somebody type.
The attribute is deliberately not reset. Clearing is about what is on the
screen rather than how the next thing will be drawn, and a program that
chose a colour and then cleared still wants that colour - which is what a
terminal does too.
Two checks in video.sh, and they took two goes to make independent. The
first pointed at the row where the letter lands when the cursor is NOT
homed, so removing the clear and removing the homing failed the same pair
and neither said which. The second now looks at a row nothing writes to
either way - and at a letter whose ink actually reaches the pixel it reads,
which "two" did not, so it passed on a screen that had never been cleared.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
The console had grown an ANSI parser, and that was the wrong shape. ANSI exists because a
screen used to be on the other end of a serial line and a byte stream was the only channel
there was. This screen is memory the program can already address, so reaching it by sending
characters for a state machine to take apart is a middleman for something the machine does
better - and it meant accepting an open protocol somebody else defines, in hardware, with no
natural end to it. Everything else on this machine is registers.
So the console gets three: cursor row at 0x03, cursor column at 0x04, and a command port at
0x05 where 1 clears the screen. Both cursor registers are READ as well as written, which is
the thing an escape cannot do without sending a query and parsing a reply - a routine that
wants to put the cursor back where it found it can now ask.
Clearing is one command against a thousand cells walked one at a time. Snake and Life are
smaller for it: 2,168 bytes to 2,163 and 1,410 to 1,396.
A HOST TERMINAL STILL SPEAKS ANSI, and bridging to the host is the emulator's job, the same
job it does reading standard input. So the escapes are now GENERATED, outbound, for the set
this device chooses, rather than parsed inbound as though the machine were a terminal. The
set cannot grow behind our backs because we are the ones saying it. The cursor is announced
lazily, at the next character rather than at the register write, so setting a row and a
column costs one sequence rather than two.
The console's block widens from three ports to six, which registryTest noticed: it had been
asking about port 0x05 precisely BECAUSE nothing was there, and the console had just moved
in. Re-blessing it would have left it checking nothing, so it asks about 0x80 instead -
clear of the console, the disk, the screen, the controller, and the sound device coming to
0x40.
Six checks in Tests/video.sh swapped from the sequences to the registers, including that the
cursor reads back and that one sent past the edge is clamped rather than refusing. Those
checks also stopped counting bytes from the ends of a file, which had quietly started
measuring an escape the moment the console began announcing the cursor.
SplitLint caught the one thing worth catching in the port: the clear command leaves A at 1
and key mode is also 1, so the second load looks redundant. Acting on it would tie a console
command to a console mode by coincidence, and break silently if either ever moved, so it is
suppressed with that reason rather than removed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
The memory map gave CosmOS 0x0000 through 0x1FFF of Program Memory and
applications 0x2000 and above. CosmOS is 8141 bytes at the previous commit,
which is fifty one bytes short of the line, and the next thing added to it
went over.
GOING OVER DOES NOT FAIL WHERE IT HAPPENS. Nothing enforces the division: an
application says where it goes with #Base and the loader puts it there, so a
CosmOS that has grown past 0x1FFF simply has the next program loaded written
over the end of it. What breaks is whichever part of the shell that program
happened to cover, at whatever later moment somebody uses it. It turned up here
as the monitor's assemble command answering "I do not know" to valid
instructions, several commands into a session, on a machine that had booted
perfectly well.
Both halves are doubled: applications now start at 0x4000 in Program Memory and
0x2000 in Data Memory. That is 16K of code and 8K of data for the system,
against the 8775 and 2948 it uses today. Both were on the same trajectory, and
moving them together means the twenty files that say #Base are edited once
rather than twice.
The standalone loader's loadable.asm keeps its old base: it belongs to the
loader CosmOS grew out of, not to CosmOS, and its addresses answer to a
different program. The unbased-segment diagnostic keeps its old base too - it
exists to produce an error message that names the address, and the message is
what is recorded.
Tests/docs.sh now reads the two limits out of the table in the README and
measures both segments against them. It reads them rather than being told them
because the table is the specification, and this is the second time in this
project that the thing nobody checked is the thing that rotted.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
AnachronautandClaude Opus 5