3b650cabcdfb1c1c47b21812922aa64030fb5fcf
37
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  AnachronautandClaude Opus 5
|
553882d28d |
Start CosmOS with a script, and let a script hold its tongue
Three things scripts wanted, and they are one thing: a machine that can have a face. /System/Boot/startup.sh runs before anybody can type. Every way of reaching the prompt for the first time goes through it, including the one where there is no disk - in which case there is nothing to find and nothing is said. A MISSING one is ordinary and silent, because a clean install has none and a machine that complained every boot about a file nobody wrote would be teaching its owner to ignore it. One that is THERE and does not begin with #! is the other case entirely: somebody meant that to run. #quiet stops each line being echoed, #loud puts it back. The prompt and the echo go together, because together they are what makes a script look like typing, so a quiet script gets neither and what it prints is all that appears. A nested script inherits quiet - a build that asked for it meant its helpers too - and gets its own setting back when the helper returns. Anything else beginning with # is handed to the shell, which does not know it and stops the script, because a script that asked for something this shell cannot do should not carry on as though it had been given it. clear empties the screen, which the console has been able to do since before there was a screen to do it on. THE PROMPT IS NOW SAID BY WHOEVER SUPPLIES THE LINE. It used to be said at the top of the loop, which is a decision made before the line is read and an answer not known until after - and it was wrong at both ends. #quiet is itself a line, so its prompt went out before anything knew to stay silent; and the line after a quiet script's last one comes from the console, having already been denied one. Off by exactly one line in opposite directions. A first attempt at this remembered whether the prompt had been skipped, which worked and was a flag standing in for a structure. The monitor's assembler prints a prompt of its own, so it reads through shellReadRaw, which is the same source without one. One admission. Handing the console its prompt back when a quiet script ended was a real fix when I wrote it and stopped being one an hour later, because the restructure above means the console's own path prompts whatever the flag holds. The comment claimed it fixed something. Breaking it on purpose changed nothing, which is how that was found, and it is now a comment saying so instead of a line pretending to work. The startup fixture ends QUIET on purpose: nothing puts the flag back when the outermost script finishes, so a script ending #loud would have tested the easy half. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
c28826df77 |
Let a script run a script, four deep
A build script calling a setup script is the first thing anybody tries. What is saved when one script starts another is A POSITION AND NOT A BUFFER: the name, which block comes next, how many are left, and where in the block it had got to. Seventy bytes, and they sit next to each other in the data segment on purpose so that saving them is one copy. The block itself is read again on the way back, which costs one disk read per return and saves 257 bytes a level - the inner script reads its own block into the single buffer there is, so coming back means fetching the outer one's block again and landing on the byte it left. The slot is reached by stepping rather than by multiplying, because this machine has no multiply and the depth is never more than three steps. Four levels. Deep enough for a script calling a script that calls a helper, shallow enough that a script running itself says so rather than filling memory. A line that fails now stops every level and not just the innermost, because a build whose helper failed should not carry on in its caller. The caller's place is saved BEFORE the new file is looked at, and put back on every way out that is not success. Opening writes the name into the live state in order to ask the disk about it, so by the time "there is no such file" is known, the caller's place has already been overwritten - a failed 'do' inside a script would otherwise leave the script that ran it reading from a name it never chose. The test resumes in the outer script's SECOND block, which is the case the whole design turns on and the one an ordinary nesting test would miss. Breaking the re-read, the save, or the limit each fails it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
a12d61fb80 |
Give the shell an echo, so a script can say what it is doing
Say.sbx has printed words since long before there were scripts, and is the wrong shape for one. It is a program: it has to be found on the disk, loaded and started, it prefixes what it was told with "it says:", and the system prints "finished" after it. Three lines of noise around one line of narration, and a load off the disk to produce them. echo is a command, so it costs a comparison. With nothing after it, a blank line - which is what anybody expects and is worth having to space a long script out. Not called "say", although that is the better word. Built-in commands are tried before the disk and always win, so a built-in say would shadow Say.sbx and quietly change what every existing script and test meant by it. Also puts "do" in the help, which the commit that added it forgot, and splits the help text: the new lines pushed it over the assembler's 255 character limit for one string. That failure was hidden for a few minutes by a 'make' whose errors were going to /dev/null - the build kept the disk it already had, and the machine cheerfully reported "I do not know: echo" from a system assembled before echo existed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
2466d79d9c |
Let the shell run a file of commands
'do <file>' runs the lines in a file as though they had been typed. The
only thing a script changes is where the next line comes from: everything
below shellReadLine - splitting the line, matching it, loading a program -
cannot tell the difference and does not have to.
What makes a file a script is '#!' on the front of it, not its name and not
a flag in its entry. The rule this filesystem keeps is that an entry holds
only what the content cannot say about itself, and a script can say what it
is; the loader already refuses anything that is not SBEX, so the two kinds
of runnable file turn each other away without either knowing about the
other. It is also the deferred half of the file-typing design, which said
to wait for a second kind of runnable thing before building any of it. This
is that second kind.
'#' is a directive and ';' is a comment, as in SplitBit assembly - one rule
across the machine rather than two dialects. Not Unix's convention: there
'#!' really is a comment that only the kernel reads, while here the shell
requires it and refuses the file without it, so calling it a comment would
be a lie about what it does.
A script stops at the first line that does not work, which is what the
LineFailed groundwork was for. Comments and blank lines are dropped by the
reader rather than by the dispatch, so they are not echoed either. A script
running out hands back to the console rather than ending the shell, because
running out of file and running out of typing are not the same thing. The
interactive assembler reads through the same path, so a script can contain
a block of assembly.
Three things this cost that were not obvious:
- RET puts A and B back, so a routine cannot answer in them. scriptByte
returning the character in A assembled, ran, and handed the caller its
own A back every time. It answers in memory now.
- A last line with no newline is still a line. Text files do not reliably
end with one and an editor eating it is a bad way to find out a command
did not run.
- Not LastStatus. See the commit before this one.
Six checks in three tests, two of which are about byte positions rather
than behaviour - a command lying across the boundary between two blocks,
and that missing newline - so their fixtures are generated rather than
committed, where an editor cannot helpfully repair them.
Nesting is not in yet: a script cannot run a script. That wants a stack of
positions rather than the one the reader keeps.
Also derives native.sh's self-hosting source list from cosmos.asm's own
#Include lines. It was a hand written list and went stale the moment
script.asm existed - the fourth time a list beside a thing has drifted from
the thing - so it now asks the thing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
fc56e815fc |
Have the shell remember whether a line worked
Groundwork for scripts, and invisible until there is something to read it: the suite passes unchanged, which is the point of doing it on its own. A script has to decide whether to run the next line, and nothing in the shell knew whether the last one worked. LineFailed is cleared as each line is read and set by the fourteen paths that fail. Cleared at the start rather than set at the end, because there are thirty seven ways back to the prompt and only fourteen are failures - and the twenty three successes would have to be found again every time a command grew a new way to finish. A command that says nothing worked. Twelve of the fourteen already funnelled through fileComplain, so this is fourteen lines rather than the refactor it looked like. It is deliberately NOT LastStatus, which was the obvious place and is wrong. That one is a program's own answer, reported by the status command and recorded by two tests; clearing it as each line began wiped the answer before the command that reports it could read its own line. The tests said so immediately. Two questions, two bytes - and a program exiting non-zero now sets both, because a program answering "no" is one of the ways a line can fail. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
d6feddd1b6 |
Give the console colour and a cursor
COLOUR COSTS A NIBBLE AND NO HARDWARE. A glyph is drawn in palette indices 0 and 1, paper and ink, and a cell's attribute nibble adds sixteen to both - so sixteen banks is already sixteen ink and paper pairs, and all that was missing was a register saying which one the console draws in. That is port 0x06, read as well as written like the rest. The palette a machine wakes up with is arranged so that HIGHLIGHTING IS ONE BIT: banks 0 to 7 are colours on black, banks 8 to 15 are the same colours as paper with black ink. So attribute XOR 8 turns any pair inside out. That is a convention rather than a rule of the machine - the device only ever adds the nibble and looks the answer up - but it is the convention that makes a highlighted line and a cursor free. Bank 0 is still grey on black, so nothing that was written before this has changed colour. THE CURSOR IS THE SAME BIT AGAIN. It is drawn by turning its cell inside out rather than by putting a block over it, so the character underneath stays readable, which matters to somebody editing a line. The device draws it rather than the window, because on a machine with a screen a cursor is a hardware feature - one drawn by the presenter would not be in a picture the machine saved. It blinks on the machine's own clock, half a second each way, so the phase is a pure function of the cycle count and a screen saved at a given cycle is the same screen every time. A blink on the host's clock would have made every saved picture a matter of luck. Off unless asked for, with bit 2 of the control port. That is right for a machine - a program painting its own screen does not want something blinking in the middle of it - and CosmOS asks for one at boot. It also asks again when it takes the console back from a program that has stopped, because a program handing key mode back the way it was told to writes zero, which turns the cursor off. The shell owns the prompt, so the shell is what makes sure there is something blinking at it. Nine more checks in Tests/video.sh, to 41: that the attribute colours the ink and not the paper, that XOR 8 turns both, that it reads back, that a cursor appears where the registers put it and only when asked for, and that it goes dark again half a million cycles later. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
978aec4809 |
Let the console edit a line, and let a file be a keyboard
BACKSPACE REACHED THE SHELL. A terminal in line mode does not hand a program every keystroke: it collects a line, rubs out a backspace, and delivers the finished thing at Return. CosmOS has always relied on that, and behind a window there is no terminal to do it, so the raw 0x08 went into the command buffer. Correcting a typo produced a line that looked perfectly right on the screen and matched no command at all - "I do not know: help". So the console does it, because behind a window the console IS the terminal. In key mode it does not, and must not: a program in key mode asked for every keystroke as it happens. CosmOS now asks for eighty columns at boot. Its own help text is seventy-four characters wide, and dir, the monitor and the assembler's messages all assume room. The machine still wakes up in the smaller mode, which is right for a machine - it is the system that knows what shape of screen its own output needs, and a game that wants forty columns says so. AND A FILE CAN BE A KEYBOARD, which is the part that matters beyond today. The console behind a window is not the console behind a terminal, and until now the difference was unreachable: it broke twice in two days and a person typing found it both times. --keyboard installs the same hook a window does, so the same path runs, and the manifest has a column for it. cosmosTyped types "halp", backs over it, arrives at "help", and requires the help to come out. Verified by removing the rub-out, which loses the whole help text. It does not test the window. Voyager's key queue and everything about presenting frames are still out of reach. It tests the console, which is where the logic is. Along the way: VOY_OBJS was missing from the dependency include, so voyager.o never rebuilt when a header changed. EmulatorOptions grew a field, Voyager kept an object that disagreed about the size of the struct, and smashed its stack on every run. A clean build hides it and 'make sanitize' cleans first, so that would never have found it either. Tests/voyager.sh did, by failing all 115 tests that start the machine - which is the differential test earning its keep on a bug that has nothing to do with what it was built to check. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
Anachronaut
|
87d819847e |
A program can say how it went
SWI osExit takes a status in A, and the shell keeps it. Fifty eight exits across twenty three programs now say deliberately whether they worked: 25 did what they were asked, 24 did not, 9 were asked wrongly. Compare is the exception and says so - one there means the files differ, which is a result rather than a failure, the way diff has always had it. IN A RATHER THAN Q, which is not a departure from the rule that a service answers in Q. This one takes an ARGUMENT, the way osPrintNumber takes A and B, and it never returns to answer anything. A is free precisely because a return would have put it back - and Q is the ALU's output, so a small number costs four instructions there against one in A. The shell does not print it. A program that failed has already said so in words and a number beside that is noise, so osLastStatus hands it back and Status is the program that shows it. That indirection is the point: the number exists for the thing that cannot read words. MARKING THE EXITS FOUND A DEFECT ON THE FIRST RUN. Type and More printed why they had failed and then fell through into the success exit, reporting that all was well. Nobody had noticed, because while the only reader was a person, the person could see both the complaint and the claim. Two smaller things. Snake sets the console to line mode and then exits with zero, and the linter flagged the second RSTA as redundant - an exit status and a console mode, equal by accident, which is the class that must never be collapsed. And the README still taught answering by writing into the frame, three months of habit that SRET replaced yesterday; that section is gone and the one describing SRET stands in its place. |
||
|
Anachronaut
|
f1cc2e56b2 |
The last handler that knew a frame offset
handleReadLine used DP1 for the frame and the conversion only looked for DP2, so it kept the whole dance - and the dance had become a no-op that looked like work: MVQA copied Q into A, A was written over the saved Q, and RETI restored it, which is where it started. readLine leaves the length in Q and SRET keeps Q, so the answer simply stands. No handler in CosmOS knows what an interrupt frame looks like now. The 0d02 and 0d05 offsets still in the file are structures - an SBEX header, an entry in the instruction table - and not frames. |
||
|
Anachronaut
|
c8c9f0b363 |
SRET: a handler answers the way a subroutine does
CALL saves A, B and Data Pointers 0 to 2 and nothing else, which is exactly why Q and DP3 are how a subroutine hands something back. An interrupt saves all of it, so a service with an answer had to reach into its own frame and un-save two fields by hand: MVSD.2 DPUP.2 0d02 ; the saved Q, by an offset it had to know STA.2 RETI Thirty places in CosmOS did that. Every one knew the frame's layout by heart, and all thirty would have gone quietly wrong the day the frame gained a field - the same duplicated fact this project keeps being bitten by, except duplicated into thirty places AND into the CPU. SRET is 0x76, in the seat the block split left for it. It is RETI's frame with RET's rule applied: A, B and DP0 to DP2 come back, the saved Q and DP3 are dropped, and the Interrupt Flag is restored from the frame - only that bit, so carry survives a service the way it survives a call, and there is one rule rather than two. RETI stays exactly as it was: a hardware handler has nothing to say and must leave no trace. CosmOS is 10,969 bytes against 11,122, and no handler knows a frame offset. TWO MISTAKES WORTH RECORDING, both mine, both caught by tests. The first conversion matched STA.2 with a regular expression that did not allow a trailing comment, so it ran past the end of one handler and into the next. The second understood the pattern and still got it wrong: the old frame write carried the answer from A into the saved Q slot, so simply deleting the write left Q holding whatever it happened to hold. Services that answer by calling something were fine - Q already had it - and services that set A directly silently reported success for every failure. cosmosCwd is what noticed, by saying "cannot go there" about a directory that was there. Sixteen handlers move the answer into Q now. Seven MVQA went with it. They copied Q into A so the frame write could carry it; SRET puts A back, so they moved a value nobody would ever read. |
||
|
Anachronaut
|
cd5f548736 |
Move the opcode map: nothing in 0x0X, and room for a return variant
Three blocks move and nothing else changes. Branches take 0x60, subroutines take 0x70, and the ALU moves up into the 0x10 block the two of them used to share. Order within each block is preserved exactly - this relocates them, it does not rethink them. WHAT IT BUYS IS AN EMPTY 0x00 TO 0x0F. Program Memory that was never written, or a load that stopped part way and left zeroes in its tail, used to read as a long run of ADDs: the machine carried on through them, arrived somewhere unpredictable, and whatever broke there was a long way from the byte that caused it. Now it faults where it is met: Fault: 0x00 at Program Address 0x0004 is not an instruction. That is the address of the byte after the last real instruction, which is the difference between a diagnosis and a search. Reserving the whole nibble rather than just 0x00 means a run into blank memory faults wherever it starts rather than only when it lands on the right byte. runOffTest records it, and the block is left empty for whatever turns out to want it. The other half is room: branches and subroutines had filled 0x10 to 0x1F between them, so a service return that keeps Q and DP3 had nowhere to sit next to its family. It has 0x76 waiting now. Five places wrote an opcode down that the scripted remap did not reach, and four of them were found by tests rather than by looking: - secondPass.c lists which opcodes take an address, and firstPass.c knows SWI by number. Missing those made XOR read as a branch. - Asm.asm knows SWI by number too, being the other assembler. Missing it made the native and host assemblers disagree byte for byte, which is exactly the check that exists to catch a thing known in two places. - loaderTest.asm carries a hand written payload, and its RETI was 0x19. To the assembler those are numbers and to the program they are data, so nothing but running it could notice. It says so in a comment now. - The Assembler Manual prints the bytes hello.asm assembles to, and two of them were branches. The monitor's recorded disassembly moved by exactly the bytes it should: 18 became 72 wherever SWI appears, with SETD and INIB untouched and every disassembled line still reading the same. |
||
|
Anachronaut
|
ce2a2cd7e6 |
Settle is a program, and a machine with no fallback still starts
The boot state opened a loop that could not be closed from inside: the machine said "settle it to try again" and gave you no way to do so. Settle closes it, in 349 bytes. A PROGRAM RATHER THAN A SHELL WORD. The shell is for the things that cannot be done without it, and this is not one - it reaches the system through SWI like anything else, which means it can be replaced, left off a disk, or called by whatever comes to call programs in turn. That last one is the point: a shell word is not callable by anything. Two services for it. osBootState answers in Q, and a machine with no disk answers settled, because there is nothing there to be unsettled about. osBootSettle puts it back. SETTLING IS THE ONLY WRITE A PROGRAM GETS - marking a start as trying or fallen back is the loader's business, and a service that let a program claim either would let it lie about something the loader has no way to check. And a hole the tests walked into, which was mine rather than theirs. With no fallback configured, a failed start left the machine unable to start at all: the mark said do not use the system, and there was nothing else to use. That turns "the last start failed" into "no start is permitted", which is worse than the problem the mark was added to solve. With nothing to fall back to it now tries the configuration again and says so - a failure that was passing recovers, and one that is not leaves the machine exactly where it would have been without any of this, which is the most that can be promised when there is only one thing to start. docs.sh caught both new services having no row in the services table before anything else did. |
||
|
Anachronaut
|
dc74149321 |
B4: the disk remembers whether the last start arrived
The loader marks the superblock before it hands over and the system clears the mark when it reaches its prompt, so a system that crashes on the way there leaves it set. The loader finding it still set next time is how a machine that will not start says so to the only thing in a position to do anything about it. Without that, pointing boot.cfg at something that dies before the shell is a machine that can never be told anything again - the shell is the only way to change the file, and the file is what stops the shell from starting. Three states rather than two, and the third is the one worth having: 0 settled the last start arrived; use the configuration 1 trying handed over, and nothing came back to say it got there 2 fell back a try failed and the fallback was used, until settled With only 0 and 1 the machine alternates for ever: fall back, reach a prompt, clear the mark, retry the broken system, crash, fall back. State 2 stops that. A system known not to start is not tried again until somebody says the situation has changed. REACHING THE PROMPT IS A DELIBERATE THRESHOLD. It is not a claim that the system works - a shell can be reached by something broken in every other way. It is the point where a person can type, which is exactly what the fallback exists to give back: anything wrong past there is fixable from the prompt and nothing wrong before it is fixable at all. The routines live in sbfs.asm because both the loader and the system read and write this byte, and two pieces of code with their own idea of where a byte lives is what this format has two implementations and a byte for byte comparison to avoid. And the trap this system documents in its own manual caught me anyway: the first version handed the state back in A, which CALL restores, so every read got whatever the caller happened to be holding. It comes back in memory now, and the comment says why. Three disks differing only in the state on them, so the tests read as three consecutive starts of one machine while none depends on another running. |
||
|
Anachronaut
|
9c144469b4 |
Take the SplitLint findings that are one operation, leave the rest
Twenty four more sites, and the interesting part is which ones were left alone. A rule emerged while reading them and it held all the way through: apply where the repetition is INSIDE one operation, skip where the author's own structure says it is a new thought, and never where two equal values mean different things. Taken: - Five registers reassigned to a value they already held, where both are the same quantity: two masks in one expression in Snake, two spaces printed by the monitor, both halves of block zero in waitTest, and a RSTA in Pour that the very next instruction overwrote. - Eighteen SETDs that reload a pointer inside one operation - a store back into the variable just read, or an INCD stepping to the second byte of a two byte value. Those read correctly without the reload. - sbfsNext, which branched to the label on the line below it. Left, with reasons that are the useful part of this: - Eight registers where the same number means two different things. CosmOS and the loader set A to 1 for a blit command and then to 1 again for a bank number; Asm compares a type against 3 and then a status against 3. Removing those couples one quantity to another that is equal by accident and would part company silently. - Ten RSTAs that open the RSTA/RSTB/CCF/ADD "return zero" block. The redundancy is what makes that idiom self contained; taking it out makes the return value depend on the line above. - Eleven SETDs that begin an arm of a comparison chain. Each arm loads, compares and branches, and they get reordered - the repetition is the reason a new arm can be dropped in anywhere. - Twenty five SETDs separated from their pointer by a blank line or a comment, which is the author saying a new thought starts here. - Two CCFs before arithmetic, which this codebase writes unconditionally. - Three redundant branches in test programs whose recorded output includes addresses, where three fewer bytes moves what the test demonstrates. Nine recorded outputs moved and every one is a size in a listing or, for Life, five more generations inside the same cycle budget. Behaviour is unchanged everywhere: cosmosSnake and cosmosEdit pass byte for byte while Snake loses eight bytes and Edit twelve. CosmOS is 10,902 bytes of program against 10,937, and the native assembler 12,173 against 12,183. The CosmOS README's size for Edit moved twice in one sitting, and this morning's check caught it both times - which it could not have done before that claim was reworded to name what it was about. |
||
|
Anachronaut
|
c3188ed657 |
Seventy becomes seventy one: a machine that can wait
HALT is terminal - stepCPU returns at once when the Halt Flag is up, so a halted machine does not execute, service devices, or take an interrupt - and that has to stay true, because every test ends with a halt and "halted" is how a program says it has finished. The consequence was that SplitBit had no way to wait at all. Every wait was a spin, and a spin is bus traffic: 11.5% of Type over a 14K file on a disk of ten thousand cycles, after read-ahead had already hidden three quarters of the latency. WAIT is 0xFE, one byte, no operands, sitting under HALT where the instruction that almost stops the machine belongs. Three decisions in it: - A line already standing means there is nothing to wait for, so WAIT does nothing. That is what makes test-then-wait race-free. - Any line ends the wait, masked or not, so a program can sleep on a device it has no handler for and read its status afterwards. Masking says who answers a request, not whether it happened. - A line that wakes the CPU without being dispatched is taken down by the WAIT. Left standing it would be found by the next WAIT, which would return at once - the program would spin exactly as before while looking as though it slept. Waiting is NOT a Status bit, and that is the trap avoided rather than a gap: Status rides into the interrupt frame and comes back out, so a machine interrupted mid-wait would return from its handler still waiting, and wait again for what it had already been given. An internal field instead. Idle cycles are counted apart from bus cycles and the halt line says so when there are any, which is what makes the difference observable at all - with the line-clearing removed the total moves by ONE cycle, 20,100 against 20,099, and only the idle half changes, halving to 9,976. A test on totals could never have seen it. Tests/terminal.sh asks that question, being the file for things a recorded output cannot see, and fails with the clear removed while "both reads finished" still passes. Three collisions, all found by building it: - 0xFE was the assembler's "not an instruction" sentinel. getOpcode now answers a negative NOT_AN_OPCODE, which is outside the range of every possible answer instead of inside the unused part of it. - 0xFE was also what faultTest and faultResumeTest executed to provoke a fault. They now use 0xFD and say why, because they did not fail when it became an instruction - they HUNG, having started sleeping instead. - Keys.asm has had a label called "wait" for a year, and mnemonics are matched uppercased. What that reported was "Branch without label" at the BRQ thirty lines away. The assembler now refuses a label that is already an instruction, at the label, by name; every instruction added takes a word out of the space of label names, so this will happen again. |
||
|
Anachronaut
|
2b5506ee70 |
Stop the prompt writing off the front of its own buffer
The prompt is the working directory's path, worked out each time by walking the chain of parents up to the root. The names arrive deepest first, so they are written backwards from the end of a 127 byte buffer - and nothing bounded that walk. Nothing bounds the depth either. A path given to one operation is capped at 95 characters and a 22 character name, but "mkdir a" and "cd a" are each far inside that and can be repeated forever. Six directories of 22 characters is 132 characters of path, and at that point the walk wrote down past the front of CwdText and into what the assembler had laid out below it: the shell's own command names. ExitName sits five bytes under, so the word "exit" went first and the shell stopped recognising the command for leaving. Measured, not deduced: fine at five levels, gone at six. The walk now counts the room it has left, byte by byte, and stops. What is already written is the DEEP end of the path, which is the end worth showing, so it is cut at the front and three dots say so - out of three bytes held back from the count, so there is always somewhere to put them. Twenty levels deep the prompt shows the last five and every command still works. cosmosDeep records that, and records it by running help, cd and exit from down there rather than by looking at the prompt: a wrong prompt is cosmetic, and this was writing into other variables. It fails with the bound removed. The tree is built by SplitDisk because a path that long cannot be given to mkdir in one piece - which is the same fact that makes the depth unbounded. The three path limits are written down in the README now, including which one actually binds. The other two do not: the longest path on a full install is 21 characters. |
||
|
Anachronaut
|
ce8fb721fe |
Say a temporary is one in the entry, not in its name
Saving something that already exists writes a temporary, deletes the original and gives the temporary its name, so that nothing is lost if the writing fails. The temporary was told apart from a real file by being called sbfs.part or sbfs.out - and those are legal names. Starting a save deleted whatever answered to one as stale scratch, so saving anything at all in a directory destroyed your own file of that name there, silently. Flag bit 0x04 now says it. The property is not in the contents - the same bytes become the finished file the instant the rename lands - so it belongs in the entry, which is the thing the commit changes. sbfsCreateTempAt is the door temporaries come in by, the commit writes the flags flat along with the name, and cleanup wipes what it finds only if the entry says it is ours. Anything else stops the save instead. The bit is also the recovery. Both listings show an unfinished write rather than sizing it, because the size in the entry is the room that was asked for and not what was written: "<unfinished>" from dir, and a line from SplitDisk saying the blocks are held and a rename brings the data back. That was the gap in what the last commit documented - the data survived a crash and nothing would show you where it was. Four new agreement checks, three of which fail with the guards removed. The fourth needed rebuilding first: both tests started on one disk, and the first save ate the sbfs.part that was the second test's SOURCE, so the copy failed for want of a file, never opened a stream, and passed while reporting on nothing. A disk each. The fifth check forges the wreckage by setting the flag on a finished file, since nothing here can crash a save half way through. No version bump: a committed file never carries the bit, so a disk this writes is byte for byte the disk the old code wrote, which the whole-image comparisons confirm. Only the wreckage differs, and older code reads that as an ordinary file - which is what it did before. |
||
|
Anachronaut
|
aa7bdc6acd |
Check the memory map against itself, not only against the code
The CosmOS README's Data row gave the system 0x0000-0x3FFF and a loaded application 0x2000 and above: two columns of one row that cannot both be true. Program was doubled to 0x3FFF when CosmOS outgrew its first map and that number was copied into the Data row as well, where the answer is 0x1FFF. docs.sh measured both segments against the CosmOS column and passed the table anyway, because it never read the column beside it. A number checked against the code and not against the number next to it is still unchecked, so it now reads both and compares them - and compares two further copies of the same fact that had gone stale on their own: the minimal application in the README, still based where applications lived before the doubling, and the map cosmos.asm opens with, which somebody reading the system reads before they read the README. Each of the three checks was confirmed by breaking the fact and watching it fail; the first reproduces exactly the text this commit removes. While in that header, the command list said five commands and CosmOS has eleven and a search path besides, and "dump is next" outlived the monitor. |
||
|
AnachronautandClaude Opus 5
|
af0360128b |
Sixty four instructions becomes seventy
The six settled back on the twenty fourth, built now. RCAL and RRET are a call that puts nothing back. CALL restores A, B and Data Pointers 0 through 2, which costs ten bytes of Stack and is why a subroutine here can only hand anything back through Q, DP3 or memory. RCAL costs two and restores nothing, which is what a short leaf routine wants and is unsafe in exactly the way the name says. They are a pair because the frames are different sizes: returning from one through the other walks the Stack to somewhere that was never a return address. That was the user's correction to the original proposal, which had a raw call and no raw return. DPUA and DPDA offset a Data Pointer by A; DPUW and DPDW by A and B together, most significant first. DPUP and DPDN take a byte written into the program, so moving a pointer by something just worked out meant storing it and loading it back. Down as well as up on symmetry grounds, which was also the user's call - the argument against it came from counting uses in a corpus written under the constraint. The opcodes sit where they belong: 0x16 and 0x1E immediately below CALL and RET, and 0x4E through 0x51 at the end of the Data Pointer family. All six fit shapes that already existed, so instructiontable.py needed only set membership and both machine side copies of the table regenerated from it unchanged. Checked at every level it exists at: the emulator runs them, the host assembler encodes them, the monitor disassembles all six with the right lengths, and the assembler that runs on the machine builds a program using them byte for byte identically to the host - and that program runs. The recorded test measures what the two calls COST as well as what they put back, because an RCAL that quietly did what CALL does would still return to the right place. It does not survive that: returned through RRET, it hangs. docs.sh can read a two word number now. The count of instructions taking a Data Pointer went past twenty, and the pattern only allowed one word, so the check would have reported that the manual had stopped saying it rather than that the number was wrong. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
fb7b224bbb |
S2: the assembler writes the file as it makes it
The output image is gone. It was eighteen kilobytes and it is now one block of window, because the file was always produced in order and only ever needed to be written that way. Everything works in FILE OFFSETS now. A cursor is a two byte number counting from the front of the file, and since a block is two hundred and fifty six bytes, the block it lands in is the offset's high byte and the place within that block is its low one - so there is no division anywhere, and ImgWalk, ProgPut and DataPut needed no change but where they start. ONE WINDOW RATHER THAN THREE. The plan said three: one per segment, and a third for the block where the program ends and the data begins, which belongs to both. Fetching a block back instead makes all of that one case. The header is patched after every byte is out, the boundary block is written by both cursors, and both are simply revisits - a revisit is what fetching handles. osFileFetch is the service that allows it, and is the read side of the write. A run of bytes in one segment costs nothing extra; a switch between segments costs two block operations, and a source file has a few dozen switches and several thousand bytes. Two bugs, both a pointer meaning two things: putAt took the cursor to advance in DP2 and then wanted DP2 for the window's address. A call puts DP2 back the way it was AT THE CALL, so the step at the end moved whatever the last call had left there - the window walked off across memory while the cursor stood still. It goes in memory now, like the block did in S1, and for the same reason. The size the file is created at could not be right. How many vectors are actually installed is not known until the second pass has resolved their handlers, and by then the file must already exist to be written into - so Keys, which brings one vector, came out four bytes short. Teaching the first pass to count them meant teaching it about devices, and about a Boot line in a loadable program not being installed at all, which is two ways to disagree with the second pass about what a file contains. So osFileDone is told the size instead. A writer asks for as much as the file could possibly come to - the whole of it plus four bytes for every vector DECLARED, which no file can exceed - and says what it really came to at the end. The blocks it did not use go back to the free count. Asking for too much costs a moment; asking for too little writes off the end of a file. That is a better service for it, not a workaround. A writer that cannot know its size until the last byte is the ordinary case, and it is exactly the case this whole rung exists for. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
9f7dffdeca |
S1: the write side learns to stream
osFileStart, osFileWrite and osFileDone are the mirror of osFileInfo and osFileBlock. A program can now write a file it never holds: Pour writes twelve blocks and a tail while keeping 256 bytes of it at a time, and the host tool reads all 3,112 bytes back with every block where it was put. ONE WRITE IS OPEN AT A TIME AND COSMOS HOLDS IT. Reading needs no state - a name and an index are the whole question - but writing safely does, because the new file has to exist before the old one is thrown away and something has to remember which temporary belongs to which name. Keeping that here means the careful order is written once instead of in every program that streams. Nothing already on the disk is touched until osFileDone, so a disk without room says so while the old file is still there. That is stronger than osFileSave can manage, where the size is only known once the caller has every byte in hand. osFileSave stays: Edit and Files hand over whole documents and have no reason to learn any of this. osFileWrite refuses an index past the end of the file, and that refusal is not politeness. Files are contiguous, so block nine of a three block file is a real block belonging to something else, and writing it would put one file's bytes inside another with nothing anywhere saying so. Checked both ways: the tail block is allowed and the one past it is not. Three bugs, all of them the same shape - a register or pointer used for two things at once: DP3 carried the block count in and was popped high byte first, which is the wrong way round from every reader in the system and made the count two hundred and fifty six times too big. sbfsStreamStart took the name in DP0 and then wanted DP0 for something else before it had read it, so it walked whatever it last pointed at and reported that it could find no room. sbfsStreamWrite kept the caller's block in DP3 across a find - DP3 being the pointer a return does not put back, which is exactly why the find uses it too. What went to the disk was whatever the scan last looked at. It goes in memory now, and the file is correct because every block says which block it is; a check on the length alone would have passed all three of these. Writing no longer finds the file for each block either. Nothing moves a file once it is made, so where it starts is settled when the temporary is created. That was not even slow - a scan stops the moment it matches - but it was a walk of the directory per block for an answer that cannot change, and it is 28 per cent of the cost of writing forty blocks. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
06bdbf7728 |
D5: move in, and give the assembler somewhere to look
The demo disk is three directories instead of thirty nine names in one list with cosmos.asm sitting between fileStream.asm and sbfs.asm: /Apps what you run /Source what you name to the assembler /Lib what those include The split is by ROLE rather than by which directory the host keeps a file in. Everything in /Lib is named by an #Include somewhere and by nothing else, which is what makes it a library rather than a source. THAT LAYOUT WAS NOT POSSIBLE UNTIL NOW, and finding out why is what this rung actually cost. An include on the machine was a bare name resolved where you stood, so every source that calls a service had to sit in the same directory as services.asm - which is every source worth having. The first arrangement of this disk put the examples in a directory of their own and none of them would assemble. So the native assembler has a search path: beside you, then /Lib. The same rule the shell already uses for a program it does not recognise, applied to the thing that reads source, and the same reasoning for it being two fixed places rather than a list - a list needs somewhere to live between one boot and the next, and there is no such place yet. It also brings the native assembler nearer the host one, which has searched -I directories since before there was a machine to run this on. The reader's per-file state grew from 293 bytes to 301, because the name it keeps is a path now and every block of a file is asked for by it. Six of those would no longer fit the room set aside, so the include list moved up a page. Both numbers are written down in two places on purpose and both were changed. dir said cosmos.asm was 17,460 bytes. It is 82,996. The size came out of the block count's LOW BYTE shifted up and the tail beneath it, which is sixteen bits, so anything from 256 blocks upward came back as itself less 65,536 - a plausible number, and wrong. Files that big say their size in blocks now. Printing the true figure wants decimal printing twenty four bits wide, which is a page of console.asm to say something nobody reads more precisely than "big". The Assembler Manual's line about SBFS being flat was the last thing in the repository still claiming it, and docs.sh now looks for that phrase and three like it in all four documents. Not a section that is wrong - one clause inside a paragraph that is otherwise right, which is the shape this kind of staleness takes. The duplicate puts are gone with the wildcard that caused them, so building the disk is quiet. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
da91a36d92 |
D4: the machine makes directories too
mkdir and rmdir are the machine's own now, and a file goes where its path says rather than always in the root. A disk can be organised without the host tool touching it. Everything below the surface works in terms of a directory and a name rather than a path. sbfsWalkParent splits the last name off, walks the rest, and hands back the two - and the separator stays on the end of the head, which is what makes one rule cover every kind of path: "/x" leaves "/", which is the root; "x" leaves nothing, which is where the machine already is; and "A/x" leaves "A/", which is neither and needs no special case to say so. Saving works in those two as well, and had to. The careful order a save uses - make a temporary, write it, delete the original, rename the temporary - only works if the temporary is made in the SAME directory as the file, because the rename at the end changes a name and does not move anything. Renaming to a path naming a different directory is refused for that reason, rather than quietly being a lie the disk goes along with. Three things this cost, all found by running it: mkdir Apps/Deep made /Apps/Apps. The leaf was worked out into SbfsWanted and then the head was walked - and walking goes through sbfsPathNext, which puts every name it meets into SbfsWanted on the way past. The head's last name landed exactly where the leaf was. It has somewhere of its own now. rmdir took a directory with something still in it, which is the one failure the whole design is arranged to prevent. Looking for children clobbered DP2 and rebuilt it from the buffer and the entry count with the subtraction the wrong way round, so the pointer walked off the end of the block and found nothing. The comparison goes through a CALL now, like the two beside it, and DP2 comes back on the entry because a RET puts it there. SplitDisk's "in use but not reachable from the root" line is what caught it. Refusing a name longer than twenty two used to read the twenty third character of a shorter one, which is somebody else's string. It is measured now. Tests/agree.sh is new and is the gate this rung was for: the same disk built twice, once with SplitDisk and once with CosmOS, compared byte for byte. The two share no code and only a written specification, and every field one writes and the other only reads is checked there and nowhere else - which entry a thing lands in, which block, what a directory's unused fields hold, the version, the free count. It caught a wrong parent immediately when that was broken on purpose. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
36ce9f6ccf |
D3: the machine knows where it is
cd moves it, dir lists the directory it is in, and the prompt says which one - but only when that is not the root, so a machine nobody has moved about on looks exactly as it always did and every recorded test that never says "cd" keeps its recorded prompt. A path beginning with a separator is measured from the root and anything else from where the machine is, so a bare name means a file in the current directory. NO PROGRAM HAD TO BE TOLD: the working directory lives in sbfs.asm beside the thing that resolves paths, because it is what a relative path MEANS. Keeping it in the shell would have meant either handing it down on every call or pasting it onto the front of every name, and the second of those is how a name that is already absolute gets ruined. Nothing stores the path. The working directory is an entry index and two bytes, and the text on the prompt is built each time by walking the chain of parents upward, writing names from the end of a buffer towards the front - which is the order they arrive in, and saves reversing them afterwards. sbfsFind splits into a walk and a check. "cd /" and "cd .." both end at the root quite legitimately, and had no way to say so through a routine whose only word for the root was "missing". Typing a program's name now tries two places in order: where you are, then /Apps. The first makes a program you are working on the one that runs; the second lets Snake work from anywhere. A word already beginning with a separator has said where to look, so only that place is tried. osChangeDir exists so that "a program may move about, and the shell puts the working directory back" is a thing that can happen rather than a promise about nothing. Both halves of that were unfalsifiable without it: with no way for a program to move, removing the restore changed no test. Wander is the program that moves - it goes where it is told and reads a file there by a bare name - and with it on the disk, removing the restore fails. The remembered file is dropped whenever what a relative path means changes: a cd, a program calling osChangeDir, a program exiting. Removing all of them fails the test and removing any one of them does not, because today every path into that cache belongs to a program that exits. It is kept in all three because the cost is a call and the failure is a file's blocks being handed out under another file's name. The cwd fixture holds two files called notes.txt saying different things, and a Say.sbx in /A that is really hello. Two copies of one program, or two copies of one file, would have passed with the whole of this deleted. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
36a1b07b5b |
D2: the machine walks a path
sbfsFind takes a path where it used to take a name: names with '/' between them, walked from the root, with '.' and '..'. Each name is looked for among the entries whose parent is where the walk has got to. A bare name is a path of one name, so everything written before directories existed still works and still costs one walk of the directory. sbfsMount takes either version. On a version one disk every entry has zeroes where a parent goes and the walk starts at zero, so the comparison always agrees - which is how a flat disk reads correctly here with nothing done to it. PROGRAMS DID NOT HAVE TO BE TAUGHT ANY OF THIS. Resolution sits inside sbfsFind, below the services, so every osFile call keeps its signature and a path is simply a longer name. Type, More, Edit and the assembler gained subdirectories without a line changing in any of them. Four things this turned up, none of which was the path walk: load copied the path into a buffer sized for a NAME, so anything over 22 characters was cut short - and cut short into a path that often still resolved. "/Apps/Deep/../../Apps/Say.sbx" became "/Apps/Deep/../../Apps/" and reported that the program was a directory. That is the whole of what looked like a bug in '..', and it cost most of the time here. load on a directory SUCCEEDED. A directory has no blocks, so reading it reads nothing and leaves the staging area holding whatever was staged last - which, if that was a program, still says SBEX and still has a working entry address. It handed back the program before it. Refused outright now. delete and rename on a directory are refused, and save refuses one up front rather than failing at the rename and leaving a temporary behind. Deleting a directory frees an entry index, and a parent IS an index, so the next file created would take it and inherit the children. create writes the parent rather than leaving it zero by luck. It would be zero - delete wipes all thirty two bytes and a fresh entry never had any - but that is a fact about two other routines, and a file appearing inside a directory it was never put in is not a failure anybody would think to look for. dir marks directories and counts them apart from files, because at this point it was calling them files of no bytes. Two hazards written down in the design note turned out not to be real, and both were checked rather than argued about: The lookup cache holding 22 bytes of a longer path cannot hand back the wrong file - textSame wants both strings to end in the same place, so a cut down entry misses. It can never HIT either, though, so every path longer than a name went to the disk every time; it holds a whole path now. The allocator stepping over directories changes nothing any test can see. A directory has no start as well as no blocks, so its bounds are nought to nought and no candidate begins before it ends. The four instructions stay, with a comment saying they are not load bearing today and why they are there anyway. makedisks.sh resolves its build path before it cds. Given a relative one it carried on and quietly built disks missing some of their files, which is how the tree fixture lost a file and sent me looking for a bug in '..'. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
2b0aeeefd4 |
Start a program by typing its name
A word the shell has no command for is now looked for on the disk as "<name>.sbx", and if it is there it is loaded and started exactly as load and run would do it. Whatever followed the word reaches the program through osArgument by the same route as whatever follows run, so "Say hello there" and "Type notes.txt" work without either program knowing how it was started. load and run are unchanged and both stay. load is how the monitor puts an arbitrary file in front of itself, which typing a name deliberately cannot do: the extension is added rather than assumed, so "notes.txt" looks for notes.txt.sbx and a text file is unreachable by name whatever is inside it. Three things this had to get right: The built-ins are tried first and always win. The search hangs off the end of the dispatch chain, so a file called dir.sbx cannot become dir, and the commands worth trusting when the disk is what you are doubting stay trustworthy. The invoke disk carries a working dir.sbx so that this is checked rather than asserted. A file that is found but is broken says so. "not a program" and "I do not know" are different answers, and giving the second about a file sitting on the disk would send somebody looking in the wrong place. loadProgram therefore hands back a status as well as a message, since only "no file of that name" can fairly be reported as anything other than a fault. doLoad became that subroutine rather than being copied. It ends in RET instead of a jump to the prompt, and each way of failing sets its number and its text together so a new one cannot leave half of the answer behind. cosmosBreak moves because Break prints the pointers it was handed and those are the shell's leftovers, which a CALL now puts back. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
4fd8bf7b3f |
Step a Data Pointer with INCD and DECD, not DPUP and DPDN by one
DPUP takes an immediate, so an offset of one is legal and does exactly the right thing. It is also three bytes where INCD is two, and reads as "offset the pointer up by one" where INCD reads as "step the pointer". 56 of them across 15 files: the system, the assembler, the editor, and eight test programs. CosmOS is 9,564 bytes to 9,537, the native assembler 11,648 to 11,635, and every program in the repository together 49 bytes lighter. The worst offender was numbers.asm, written this week, where every sixteen bit helper reaches the low byte and comes back the long way round. It is the file every other part of the assembler includes, so it is the first thing anybody reads when they go looking - and it was teaching them the long way. Pattern matched off sbfs.asm rather than off the instruction table I had just embedded in two programs. THIS IS NOT TWO WAYS TO DO ONE THING. DPUP takes an arbitrary number, so one is inevitably among them; INCD earns its place by making the common case a byte cheaper. The overlap is structural and the choice is a usage question, which is a linter's job rather than an ISA's - "DPUP.n 0d01: INCD.n does this in a byte less" is a mechanical rule with no judgement in it. Nothing needed re-recording, which was not a foregone conclusion: cosmosBreak prints the system addresses the registers happened to hold, and they did not move. Both assemblers still produce identical bytes and CosmOS still builds itself to a fixed point. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
3d2ab34229 |
Streaming: read a file bigger than the machine's memory
osFileRead hands over a whole file, which settles anything under 64K and settles nothing above it. CosmOS's own source is above it - the sources together are 104K against 64K of Data Memory - so a machine that is going to assemble itself needs another way to ask. osFileInfo (0d26) says how many blocks a file occupies. osFileBlock (0d27) hands over one of them and says how many of its bytes belong to the file. Between them a program reads a file of any size through a buffer of 256. Blocks rather than bytes from osFileInfo is forced, not chosen: a file on a sixteen megabyte disk is up to twenty four bits long and a pointer holds sixteen. osFileBlock's count answers in DP3 for the same kind of reason - a whole block is 256 bytes, which does not fit in a register, and a count that reported it as zero would make every reader special-case the end. Nothing is kept open. Every call names the file, so there is no handle to leak and nothing left behind by a program that stops halfway. Taken at its word that means searching the directory once per block, so the system remembers where the last file it was asked about lives; every path that can change what a name means calls fileForget, including the shell's own delete and rename, which do not go through the services. Correctness never depends on the cache - a cache thrown away is indistinguishable from one never filled. Measured on a 329 block file: 7% of the run saved when the file is the first directory entry, 11% when it is the sixteenth. These two say WHY when the answer is no, which the others do not. Elsewhere the only useful response to a failure is to give up, so one value suffices. These are asked questions, and running off the end is how a reader learns it has finished, so it gets an answer of its own: 1 no disk, 2 no such file, 3 past the end, 4 the disk refused. Apps/Stream.asm reads an 84,000 byte file through 256 bytes. The check that matters is the second one: a small file read BOTH ways - whole with osFileRead and streamed - with the two checksums compared, so streaming is measured against the path already known to work rather than against a number someone wrote down. The checksum is Fletcher's rather than a sum, because a sum is the same whatever order the bytes arrived in and the order is exactly what streaming has to get right. Both checksums were also confirmed against the same arithmetic run on the host. The rest of the test is the cache: two files read alternately catch a memory that missed the name changing, and a rename catches one that missed the file moving - and that one would otherwise pass, since the blocks are still there holding the same bytes. The test file is generated rather than taken from the repository. The CosmOS sources would be a truer picture and would move the recorded checksum every time a line of CosmOS was edited, putting a real difference in a crowd of meaningless ones - the same trap the cycle counts used to set. cosmosBreak's recorded output moves by two bytes in two pointers: SbfsIndex added two bytes to the filesystem's data and Break prints the system addresses the registers happened to hold. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
3b800a69e8 |
Monitor: a line assembler
a <address>, then instructions until a line that is just a dot. The syntax is the assembler's own: a selector rides on the mnemonic as LDA.0 or LDD.0.1, and leaving one off means Data Pointer 0 exactly as it does in a source file, so nothing learned at the monitor has to be unlearned when writing a program. Case is folded, since the assembler does not care either. Numbers are hexadecimal and bare. A source file writes 0x2000 or 0d16 because it has both and must say which; a monitor has one and says so once, in the manual, rather than on every line. It reads the same table the disassembler does, searched the other way round, which is the point of it being a table rather than two lists: what a writes, d reads back, and neither can drift from the other or from the assembler both were generated from. Instruction lengths come from the shared shape table too, so the cursor cannot get out of step with what was written. THE WHOLE LINE IS UNDERSTOOD BEFORE ANYTHING IS WRITTEN. Emitting the opcode first and discovering a missing operand afterwards leaves half an instruction in memory, which the next line usually covers up and the last line of a session does not. Written that way first and fixed. What cannot be written is a label, and that is the whole difference between this and the assembler proper: a label is a promise to fill an address in later, and later is what a line at a time does not have. The recorded test now types in a complete program - a string poked into Data Memory, instructions assembled into Program Memory, and the result run - and includes a lower case mnemonic, both selector forms, an instruction that does not exist and one missing its value, so the refusals sit beside the successes. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
AnachronautandClaude Opus 5
|
c23adb2836 |
Break: name the status register properly and show the Stack Pointer
The dump labelled the status register "S", which reads as Stack to anybody sensible - and the Stack Pointer was the one register it did not show, so there was nothing to contradict the guess. It is written "status" now, and followed by the bits that are up, because a dump that makes you look the number up is only half a dump. The Stack Pointer is not in the frame, since the frame is where the Stack Pointer is. What the program had is fourteen bytes above it, that being what entering an interrupt puts down, so it is worked out and shown. Apps/Break.asm takes its second stop inside a subroutine, so the recorded output shows the Stack Pointer at FFFF and then at FFF5: a difference of ten, which is the size of a CALL frame. That checks the value is derived rather than constant, which the previous version could not have told you. Reported by Anachronaut, who read the output and asked why a pointer was two digits long. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
AnachronautandClaude Opus 5
|
5fd995aa62 |
Breakpoints: SWI osBreak, and s refuses a read only bank
A breakpoint that shows every register as the program had them, waits for a key, and carries on. NOTHING IS OVERWRITTEN, and that is the design rather than a shortcut. A breakpoint poked into a running program has to replace an instruction, and putting that instruction back in order to continue is the same act as disarming the breakpoint; firing a second time would mean stepping over the restored instruction and putting the breakpoint back behind it, and this machine cannot step a single instruction. SWI is two bytes, dispatches through a vector, and its frame already holds the address after it, so RETI resumes at the next instruction with nothing to restore and nothing to re-arm. It fires every time it is reached. The price is that a breakpoint is part of the program: a build with them in has different addresses from a build without. That is the bargain every machine with a break instruction makes. Every value shown comes out of the frame rather than the registers, because by the time the handler runs the registers are the handler's. Apps/Break.asm stops twice so that the second stop is checked as well as the first. Also here, found by the test that came with it: the monitor's s wrote into whichever bank was selected, and bank 2 is the controller's own table, published read only. Writing to it was refused, and a refusal nobody catches stops the machine - so selecting the bank table to look at it and then typing s killed the session. bankPresent now keeps the whole flags byte and s declines. The recorded output of cosmosMonitor had contained that crash, having been blessed without being read. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
AnachronautandClaude Opus 5
|
0b6d2be43f |
CosmOS: a service interface for the disk and console, and the monitor in the shell
Two changes that arrived together because both live in cosmos.asm. THE SERVICES. A loaded program that wanted a file had to include the whole filesystem, carrying two and a half kilobytes of a private copy of code the system already had running, and then mount a disk that was already mounted. Five services are added at pinned numbers 20 to 24: osFileRead, osFileSave, osFileDelete, osFileRename and osPrintNumber. The sizes fit the registers exactly in both directions. A file that can be read into Data Memory is under 64K by definition, so its length is sixteen bits: coming back it is DP3, going out it is A and B together, and neither direction needs a record in memory whose shape both sides must agree on. There is deliberately no service to mount a disk. The system mounts one before its first prompt, and a program mounting it again was only ever a consequence of owning a second copy of the library, so that call disappears rather than moving. Apps/Files.asm writes, reads, renames and deletes a file in 645 bytes and includes nothing but the service names. THE MONITOR. Previously an application, now part of the shell, because an application occupies the one region a loaded application is given: a monitor that was an application could never examine another one, since loading the thing to be inspected would replace the thing doing the inspecting. "monitor" turns it on and the prompt becomes "*". It is a mode rather than a sub-prompt, and it persists: because the mode is a variable the prompt reads rather than a second loop, and every path back to the prompt goes through one place including osExit, a program started with "g" that gives the machine back arrives at the monitor prompt it was started from. Examining a program and running it therefore do not interrupt each other. "exit" leaves whatever you are in. It supersedes dump, and adds disassembly, writing bytes, and jumping to an address. Its instruction table is generated from the assembler's own list by Tests/instructiontable.py rather than typed again, and Tests/docs.sh checks both that the system's copy matches the generator and that the lengths that table implies are the ones the manual's Bytes column prints. A disassembler that disagreed about a length would not print one line wrong, it would lose its place and print everything after it wrong. Also here: b refuses a bank that is not registered, since asking the controller for one is refused and a refusal nobody catches stops the machine; g records the Stack the way run does, without which a program returning through osExit restored whatever the last run had left; and make cosmos-disk now depends on the system as well as the image. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Anachronaut
|
c4b59acc68 | Infrastructure for system services through software interrupts. | ||
|
Anachronaut
|
e3100b4718 | Fixed assembler bug that caused crash on IR array resize. Added line editor app. | ||
|
Anachronaut
|
1d1a14318c | Programs can now list and share vectors. | ||
|
Anachronaut
|
08624925fe | Interrupt on keypress mode | ||
|
Anachronaut
|
91c9d49d1b | CosmOS pre-alpha and launchable application versions of old programs. |