418631a22162a55afe169b977f72b0c35782f950
303
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  AnachronautandClaude Opus 5
|
3c76934a9a |
Tab reaches the disk
Paths and programs, which is the half that makes it worth having. The first word of a line is a command or a PROGRAM, offered under the name somebody would type - the extension taken off - and anything after it is a file, offered as it really is. A separator anywhere in the word says which directory to look in. A directory answers with a separator on the end instead of a space, which says what it is and lets the next part be typed straight away. The answer ending in one is also what stops a space being added, so that is one test rather than a flag. PROGRAMS ARE LOOKED FOR WHERE THE SHELL WOULD LOOK to run one: where you are, /Apps on the disk you are on, and /Apps on drive 0. Offering something the shell would not find would be finishing a word into a thing that then does not work. Drive 0's is skipped when that is already the drive, or every program in it would be offered twice and nothing would ever be the only match. Walking somebody else's directory means standing in it, which is the only way to walk one here, so where the person was and which drive they were on are put down first and restored whatever happens. Three bugs, all found by running it: THE DIRECTORY TEST WAS INVERTED. dir asks the same question the same way round four hundred lines further up, which is what made it obvious once looked at. THE /Apps WALK OVERWROTE THE TYPED PATH. The whole search runs a second time to list the matches, and by then TabDir said "/Apps" - so a word that had named nowhere went looking in the wrong place and listed nothing at all. Two ways into the walk now, and the typed path is never written over. AND LISTING ONLY KNEW ABOUT COMMANDS, because it was a second copy of the walk. It is the same walk with a flag now: finding the answer and showing the matches are the same question asked twice. Also cosmosMonitor, which had been RE-BLESSED INTO MEANINGLESSNESS by the wall move. It disassembles a loaded program, at an address the input names - and that address moved a page while the recording was simply re-recorded to whatever came out, which was a page of zeroes. It is pointed at 5000 again. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
bb065fe221 |
Tab finishes a word somebody started
The first word of a line, against the shell's fifteen commands. One match goes in with a space after it, because a word that can only be one thing is finished. Several are folded into their longest common prefix and that goes in, which is the most that can be said without guessing which was meant - and if that adds nothing, the matches are listed and the line put back underneath. THE LINE COMING BACK IS THE HALF I EXPECTED TO BE HARD and it was already solved. The prompt has been reprinted somewhere else entirely, so the editor's idea of where the line begins is wrong - but editAnchor works that out backwards from where printing ended, precisely so it survives the screen moving. Listing is a redraw it already knew how to do. editInsert became editPut, a routine, because completing a word puts in several characters and every one of them is that. Which cost a bug immediately: the old inline code left the insertion point in A, and a RET puts A back to what the caller had. Two more bugs worth naming, both mine and both the same shape - a pointer that had moved: THE CANDIDATE'S START HAS TO BE KEPT. The comparison walks DP3 through the name as it matches, so by the time a match is declared, DP3 points at the part AFTER what was typed - and that is what got copied. "he" completed to "he" because the answer taken was "lp". AND THE INSERTION STOPS AT OR PAST, not exactly equal. With the wrong answer the two counters passed each other and the loop ran off the end of the buffer, filling the line with whatever was next in memory. They cannot pass each other now, and the branch stays, because the cheaper failure is worth nothing. MY OWN TEST HAD A HOLE and breaking the code found it. The later-word case pressed Tab after a space, where there is nothing to finish anyway, so it passed whether or not the shell checked which word it was on. It types "echo he" now, which would become "echo help" if it did not. The assembler's label table went past 1024 and is doubled. A ceiling reached once will be reached again, and it is pointers into source already in memory. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
749fef8ce2 |
The shell's own words, as a table and not just a chain
The dispatch is a run of "is the line this name" comparisons. That is fine to execute and impossible to WALK, and completing a half typed command needs to walk them - so the names have to be data as well as code. They nearly were already: DirName through ExitName were fourteen zero terminated strings sitting back to back, which is a table by accident of layout. This makes it deliberate. MonitorName joins them, the run is labelled, and a count goes underneath because a run of strings does not say where it stops. WHAT MAKES IT A TABLE IS THE ZEROES. Each name ends in one, so the next begins after it: no pointers, no lengths, and adding a command costs a line. Tests/docs.sh reads both the dispatch and the run and compares them, because the two can disagree and every way they do is quiet. A command added to the dispatch and not to the run simply never completes, which nobody would think to check by hand. Something put BETWEEN the strings is worse: the walk ends there and takes every command after it, and the machine goes on working perfectly except that Tab knows about six things instead of fifteen. All three break that way and say something useful. Putting one byte in the middle of the run reports that it holds ten names against the fifteen claimed, which points at roughly where. Groundwork for Tab completion. Nothing uses it yet. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
b04e4b7d1c |
Finish making the tune a program
The user's conversion, which I reverted while I was working out whether it was half done or broken. It was half done: an sbx application wants its #Include above #Program, because services.asm ends in a #Vectors block and a #Base written after that has no segment to be the base of. So the include moves up, the bases move a page with everything else, and the test starts it from the shell instead of booting it. It plays for 9,469,987 cycles, 9,423,527 of them waiting, which is the same 567 frames of music it played as a boot image. BEING A PROGRAM MEANS ITS VECTOR IS THE SYSTEM'S TO INSTALL. It brings the screen's, so that it has a beat to play to, and CosmOS puts it in when the tune starts and takes it back out when it stops - a thing a boot image never had to have right, and the second program here to exercise the version two format at all. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
3449405b18 |
Give the system another page of each memory
CosmOS had 1,161 bytes of Program Memory left before the address applications load at, and Tab completion is not going to fit in that with anything to spare. So the wall moves up one page: the system keeps below 0x4FFF and 0x2FFF, and an application is based at 0x5000 and 0x3000. A PAGE IS A CHEAP THING TO GIVE IT AND AN EXPENSIVE THING TO RUN OUT OF. An application still has 44K of Program Memory before the vector table and the largest one here uses 7.5K, so what was taken from applications is space nothing has ever asked for - while what the system gained is the difference between building the next thing and counting bytes while building it. Not doubling, which was the version that would have cost application space worth minding. One page, and the same again when it is needed. Nothing in the machine knows where the wall is, so this is 34 #Base lines, one threshold in the fault handler, and the table in the CosmOS README that Tests/docs.sh reads its limits out of. The native assembler's scratch map had to move with it, and docs.sh said so before anything ran: its data reached 0x40D6 and its buffers began at 0x4000, so they were sitting on its variables. That file already carries a paragraph about the floor coming up and the map staying where it was. It has happened twice now, and been caught by a check the first time wrote. Twenty three recordings are the same runs a page higher. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
f97d15de08 |
The font comes from a chip, not from RAM that remembers
videoReset zeroed video memory and then wrote the font and the sixteen colour schemes into it, and the comment above that said out loud what was wrong with it: "everything here is ordinary video memory". RAM does not wake up with anything in it. That was the last piece of magic in this device, and it looked harmless until something wanted the font BACK - a program that redefines a glyph had destroyed the only copy there was. So the device has a character generator, the way the machines this one is pretending to be really did, and the copy into RAM is a thing it DOES rather than a state it mysteriously starts in. Command port 0x39: bit 0 for the font, bit 1 for the schemes. THE RAM IS STILL RAM. A program may overwrite every glyph and every colour and should be able to, which is what makes this a tile engine rather than a text display. What changed is that it is no longer a one way door. NEITHER COMMAND CLEARS WHAT IT DOES NOT OWN. The font used to clear the whole of tile memory before writing itself, which was harmless while it happened only at reset and is wrong the moment a program can ask: a program that defined a tile of its own and then wanted its text back would have paid for it with the tile. The reason it is a chip rather than a file on the disk, which was the other candidate: the boot chain prints before CosmOS exists. Stage one prints "?" when there is nothing to boot, and if the font came off the disk then the message about the disk having failed would be the one thing that could not be drawn. A system that wants its own font still loads one over the top - the ROM is the floor, not the policy. Two things that had been worked around now simply work. The shell asks for both whenever a program exits, so a program that redefined a letter no longer leaves it unable to spell, and Grid no longer needs to have saved the screen to avoid handing back green text on blue. And the fault screen asks for the glyphs first, because a message spelled in somebody's tile graphics is no message at all. Five video checks. Two runs each for the font and the schemes, since the map holds a tile NUMBER and the glyph is looked up when the frame is drawn - so restoring changes every cell using it, including ones drawn before, and what the two runs differ by is the command. The third guards the decision not to clear: tile 200 has to survive the font coming back. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
925388c2f2 |
Keep the personal disk three starts back
Copied before every start of the machine, and kept several deep rather than copied over one file. ONE BACKUP TAKEN AT EVERY START IS WORSE THAN NONE. The way a disk is lost is that something goes wrong - and the very next thing anybody does is start the machine again to see how bad it is, which is exactly when a single backup gets overwritten by the wreckage. Three deep means the damage has to happen and then be started past three times before the copy that would have helped is gone. AND IT IS NOT GUARDED BY A CHECK THAT THE DISK STILL LOOKS RIGHT, because no such check can be written. The disk that went missing this week was a perfectly valid and perfectly empty filesystem: the format had succeeded, and there is nothing to look at that says a disk has lost anything. That is the whole reason to keep the old ones rather than to judge the new one. The backups sit outside clean's reach like the disk itself. A backup a rebuild deletes is not one. The message the disk prints when it is first made said "nothing in this makefile will touch it again", which stopped being true the moment this was added. It now says written to, and says where the copies go. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
c1b3c4c156 |
A rule for the bug that formatted a disk
falls-into-subroutine. The code above a label ends without going anywhere and the label is one something CALLs, so execution walks into the subroutine, reaches its RET, and returns to whatever the Stack happens to hold - because nobody called, there is no caller, and it goes somewhere nobody named. It is worth a rule because the symptom is nowhere near the cause and changes with the Stack. In CosmOS's monitor it was usually a byte that does not decode, in the middle of newLine; once it was inside sbfsFormat, and the machine formatted the disk it had booted from. Two exemptions, and both had to exist or the rule would have reported well written code: A TAIL CALL IS THE SAME SHAPE AND IS FINE. Falling out of one subroutine into another means the RET returns to the outer caller, which is real. So it only fires when nothing since the last branch or return was a call target either - which is the linter's usual trade of precision for being worth reading. AND osExit NEVER RETURNS. It is how a loaded program gives the machine back, and every program here ends with it and then writes its helpers underneath. Without that, twelve well written programs were reported. It is the one name from the system this tool knows, and the comment says why it is there. Also SRET, which stopsFallthrough did not list. It returns from a handler exactly as RET returns from a call, and leaving it out is a gap in every rule that asks what reaches an instruction. Load bearing rather than tidy: without it cosmos.asm reports a handler ending in SRET as falling into the routine written under it. A first pass over the file collects call targets, because a subroutine is very often called from further down than it is written. The corpus reports none of it, which is the point rather than a disappointment, and the Test Manual now says so - a baseline entry that is absent is otherwise indistinguishable from a rule that never runs. Checked against the version of cosmos.asm from before the fix, where it names the line. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
66be42d7bb |
A word the monitor does not know goes to the disk, not into the weeds
There was nothing at the end of the monitor's command list. An unrecognised word
fell off it and straight into sayPrompt - which is a ROUTINE, so its RET had
nothing of its own to return to and went wherever the Stack happened to be
pointing.
The user found it by typing a program's name at the monitor prompt, which is an
entirely reasonable thing to do: the monitor is a mode of the shell, so
everything the shell does is meant to work in it. What they got was a fault, and
before that a second prompt printed on top of the first - which is sayPrompt
doing exactly what it is for on its way past, and the tell that it had been
entered rather than called.
WHERE THAT RET WENT DECIDED HOW BAD IT WAS. Usually 0x0003, in the middle of
newLine, and the machine stopped on a byte that is not an instruction. Once it
was inside sbfsFormat, and the machine formatted the disk it had booted from -
the user's would not start again, and neither would mine, which is how I came to
have a reproduction before I had a diagnosis.
Pre-existing, and not recent: it is there at
|
||
|
AnachronautandClaude Opus 5
|
fd9c4c75f8 |
Tell the person where it hurts
A fault stopped the machine and printed a line to standard error. On a terminal that is a diagnosis. Behind a window it is a frozen picture and no reason at all, because the message went somewhere nobody was looking - the machine looked hung and was not. It had stopped, and said so invisibly. CosmOS catches all five faults now and says what happened on the screen, with the address, in red. A FAULT ENDS THE PROGRAM, NOT THE MACHINE. That is the answer to "carry on or start again", and it is not a compromise: a bare RETI from most of these meets the instruction that failed and fails again, so carrying on was never on offer. But the machine is almost never what is broken. Everything the shell puts back when a program exits - the Stack, its vectors, the drive, the working directory, the console, the screen - is exactly what wants putting back after one dies, so the handler sets a status and joins handleExit. You are back at the prompt, and the program is recorded as having STOPPED rather than finished, because saying "finished" under a red fault message would be the shell contradicting itself. A fault below where programs load is the system's own, and there is nothing to go back to. That one says so and stops. THE SCREEN GOES BACK TO A MODE TEXT CAN BE SEEN IN, and that is the part that matters rather than the part that is prettiest. A program that faulted in bitmap mode left the console with no text rows, so it draws nothing at all: the message would be perfectly correct and completely invisible, which is the one thing it must never be. Two palette entries go back for the same reason, since a program that wrote its own colours can leave every ink the same as every paper. Only the two the message needs, so the rest of what the program chose is left alone. Both halves are checked by looking at the PICTURE, because the serial line was never where the problem was. Crash blind ruins the palette and drops into bitmap mode before it faults; without the mode the screen comes back 320 by 200 with nothing on it, and without the palette it is the right size with the message present and unreadable. Each break loses the red on its own. Crash is also a program worth having: it breaks in whichever of the five ways you name, so a fault screen can be looked at without having written a bug first. Two things found on the way: The native assembler keeps its OWN copy of the reserved vector names, so it did not know NoHandler or NoDevice and built a cosmos.bin that differed from the host assembler's. Caught by native.sh, which is exactly the drift that test exists for. And cosmosMonitor had dead input. It assembles code into 0x8000 and runs it, and that code faults - which used to kill the machine, so everything after it in the file had never run. It runs now, and the recording grew by sixty lines of monitor session that had been unreachable since the day the fault was put there. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
000a6d39cb |
Somewhere to send the fault about there being nowhere to send it
Dispatching through a vector with nothing in it was the one fault this machine could not hand over, because the thing that would hand it over is the thing that has just found nothing to hand it to. It stopped the machine and no program could do anything about it - so calling a service the system does not implement was fatal, and that is an ordinary mistake to make. Two new fault vectors: 5 when a software vector was empty, 6 when a device interrupted and its hardware entry was. Separate, because they are separate mistakes with separate fixes - one is a program calling something that is not there, the other a program that asked to be interrupted and forgot the handler. WHICH ENTRY WAS EMPTY ARRIVES IN Q, and it is the only thing on this machine a handler is given in a register. Not a fault cause register by another route: the vector still says what happened and Q says which of the 256 entries it happened about, which is a parameter and not a cause. It costs no new state at all, because the frame already saved the Q the interrupted program had and RETI puts it back. The escalation happens once. If vector 5 or 6 is itself empty the machine stops the way it always did, having genuinely run out of places to go. swiFaultTest is what guards that, and it was written long before any of this: it installs nothing, so it must still get the old halt. Breaking the escalation fails the two new tests and not that one; making the escalation unbounded fails that one and not the two new ones. Each break fails exactly the half it belongs to. noDeviceTest is fed no input on purpose. The console raises its line once when input ENDS as well as when a byte arrives - which exists so a program driven by interrupts is told when nothing more is coming - so with no input at all, that end is what turns up. Groundwork for CosmOS's fault screen, which wanted to catch these two and could not. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
4d976fc22a |
A program reading a line gets the editing too
osReadLine goes through the shell's editor now, so anything that asks the system for a line gets arrows, Home, End and Delete. The editor is a program, and a word typed with two letters the wrong way round can be put right without starting the line again. IT DOES NOT GET THE HISTORY, and that is the interesting half. Edit would otherwise fill the history with the text of somebody's document, and pressing Up in the middle of writing one would put "dir" into it. The history belongs to the thing whose lines are commands. Two entry points rather than a flag the caller sets first, so a caller cannot forget which it wanted. And the console is put back the way it was FOUND rather than the way the shell likes it. A program that had asked for key mode and then read a line through the system used to be handed back a console in line mode having asked for nothing of the sort. The status port reports all three things the control port can ask for, in the same order two bits along, so one shift turns what the console IS into what to write to make it that again. Which uncovered a real fault in the console. READING THE STATUS PORT WAS EATING A KEY: in line mode the poll consumed an arrow key and dropped it, so a program that looked and then asked for key mode - exactly what reading a line now does - found the first key it was reaching for already gone. A look must not consume what it cannot report, because the mode can change. It is held now and delivered as soon as something will take it. A blocking read still discards it, and must: that read IS the delivery, and a byte held there would be met again forever. Four recordings gained a program's echo, and cosmosEdit's went from "> : : : : > : : > 1: alpha" to a session you can read. VERIFIED THE SAME WAY AS BEFORE: with only the program side of the echo silenced, all 192 tests pass against the recordings as they were before this commit, so the echo is the whole of what changed. cosmosEditService is the new test and it checks both halves at once. Inside Edit, Left/Delete/Left puts "alpah" right. Up and Down do nothing there - were a program's line walking the shell's history, the next line would come out as the echo command from the top of the file instead of the word. And one press of Up back at the prompt finds the command typed before Edit was started, which is the proof that nothing the editor read went into the history at all. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
71f6e215f9 |
The shell remembers what was typed before it
Up walks back through the last eight lines and Down forward again. It exists only because the keys reach the system now: until A1 and A2 there was nothing to press Up at, and the line was assembled somewhere the shell could not see. A RING RATHER THAN A LIST. A ninth line pushes the oldest out by moving where the ring starts, not by moving any of the lines - so keeping a line costs a copy of that line and nothing else, however full the history is. Eight is a power of two, so which slot an entry lives in is an AND. The ISA had the awkward part already: A and B are a sixteen bit shift register, so one SHR with B empty turns a slot number into the offset of a 128 byte slot, high byte and low, ready for DPUW. A NINTH SLOT HOLDS WHAT WAS BEING TYPED when Up left it, and Down brings it back. Losing a half written line to a keypress is the sort of small rudeness that makes a thing unpleasant to use, and it costs one slot to avoid. An empty line is not kept, and neither is one the same as the line already at the top. The test proves the second by looking one further back: if a repeated command were kept twice, the line behind the newest would be the same line again. The redraw had to learn to rub out. One space was enough while the only thing that shortened a line was taking one character out of it; a recalled line replaces the whole of it, and a short line over a long one left the tail of the long one on screen looking like part of what you were typing. It now covers exactly what was lost - which turned out to be one space fewer than before in the cases that GREW, so two lines of cosmosEditKeys lost a trailing space that was never doing anything. Costs 1157 bytes of Data Memory, taking CosmOS to 6220 of the 8192 it has before a loaded program's data begins. Worth writing down: that is the budget, and this is the largest single thing in it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
81e544eb3d |
Load a program that has no data
A five instruction program that writes one port and exits has no Data Segment at all, and the loader stopped the machine dead on it. It asked the memory controller to move a segment of no bytes, and a length of zero asks for the whole 64K - which is the machine's rule, and a reasonable one, since two bytes cannot say 65536 and a transfer of nothing is not usually what anybody meant. It is exactly what was meant here. 64K did not fit, the controller refused, and the load stopped half done. ON A TERMINAL THAT PRINTS A FAULT WITH AN ADDRESS. Behind a window it is a frozen picture and no reason at all, which is how it was found and is a separate problem from this one. The header says how long each segment is, so the loader knows before it asks. Both bytes are already in hand, so the test costs one OR. Nothing is lost by skipping the transfer: a blit leaves the controller's addresses past whatever it touched, and a blit of nothing would have left them where they already are, which is where the vectors are read from next. Guarded for the code segment too. A program with no code is equally assemblable and would have stopped in exactly the same place. Mode.sbx is the fix's test and a program worth having on its own: forty columns or eighty, whichever the screen is not in, which is what a person wanting Snake drawn twice the size actually needs. Ten instructions and no data, deliberately - it prints its two digits a register at a time rather than from a string, so it stays the smallest shape a loadable program can take. Nothing else on that disk had ever been that shape, which is why nothing had ever tried it. Reported by the user, who wrote the program. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
373454ec00 |
A fresh disk for every test, fixtures included
A fixture built by makedisks.sh was handed to each test where it lay. Twenty four tests name disks/cosmos.img and several of them write to one, so a test could hand the next one a disk with its leavings on. romBoot is what found it. Its recorded output described a directory that selfBoot had made earlier in the same run, so it passed in a full run and failed on its own - which is the worst way round for a test to be wrong, because the form nobody runs is the one telling the truth. Its recording now says "made" like selfBoot's, which is what running the same input on the same disk should always have said. Fixed as a class rather than as an instance: run.sh copies a fixture before attaching it, the same way it already removed a scratch image. Then every one of the 138 run and rom tests was run on its own to see whether anything else was leaning on what ran before it. Nothing was, before or after. Also, cosmosEditKeys.in was written by Python's write_text, which encodes as UTF-8, so every key byte was 0xC2 and then the key. The test passed anyway, because the shell ignores a byte it has no use for - a fixture working for a reason it was not built on, which is exactly the thing that stops working without anybody touching it. Written as bytes now; the recording is unchanged, which is the proof the stray bytes were being ignored. docs.sh is what caught that, and it turns out to draw the line in the right place by construction: a deliberately binary fixture does not decode as UTF-8 and is skipped, while one that is accidentally UTF-8 decodes and is reported. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
736037462e |
The shell edits the line it is given
Three different things used to do this job, and which one you got depended on where the machine was running. On a terminal the host held the line and did the echoing and the backspacing; behind a window the console's own gatherer did it; from a file nothing did it at all. One job, three implementations, none of them in the system - which is why there was no way to move about in a line and nowhere for a history to live. So editLine does it. Key mode while a line is being read and line mode straight after, so nothing else in the system and no program calling osReadLine notices anything changed. Left and Right, Home and End, Backspace for the character before the cursor and Delete for the one under it, and anything typed goes in where the cursor is with the rest of the line moving along. Ctrl-D means the end of input again, on an empty line, because that was a thing the terminal did while it was holding the line and it is not holding it now. Same trade as the echoing. MOST KEYSTROKES DRAW NOTHING BUT THEMSELVES. A character typed at the end of a line needs no cursor moved: printing it is the whole change, and a backspace there is three ordinary bytes. That matters beyond speed - moving the cursor by hand is what a terminal is TOLD about, in an escape sequence, so redrawing on every keypress would fill every recorded transcript in this suite with them. The line is only reprinted when something happened in the middle of it. Where the line STARTS is worked out backwards from where printing ended, rather than trusted from what was remembered. That is what makes it survive the screen scrolling: a line printed on the bottom row moves everything up by one, and a remembered row would be one too low from then on. The command line holds 127 characters, up from 63. The limit started to be felt the moment a line could be moved about in. 58 recordings changed, and every one of them by the echo. THE PROOF IS NOT A HEURISTIC: a CosmOS built with the echo silenced reproduces 187 of the 188 recordings byte for byte. The one exception is cosmosTyped, the backspace test, where the rub-out marks now come from the shell instead of from the console's gatherer - same marks, different author. cosmosEditKeys is the new test, and every line in it is typed wrong and then corrected with a different key. Its last line is eighty six characters at a prompt in column two on an eighty column screen, so the line runs onto the row below and the shell has to find the start of something it can no longer see; breaking either half of that arithmetic fails it. Also: agree.sh looked for "> the same", anchored to a prompt that no longer precedes what a command prints. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
b3726c950a |
Deliver the keys that are not characters
An arrow key has never reached this machine. Voyager threw it away for want of anywhere to put it, and a terminal sent ESC [ A, which arrived in the middle of whatever was being read and made it unrecognisable - typing Up at the CosmOS prompt put three bytes in the command line and got "I do not know". So the console names them: one byte each, 0x80 upward, above ASCII so nothing written before them can collide. Up, Down, Left, Right, Home, End and forward Delete, with room above for the paging and function keys. The console normalises, which is what it already does. Behind a window it turns the key somebody pressed into a byte; on a terminal it turns the sequence into the same byte. That is the act it has always performed on Return and Backspace, one layer further along, and it is why a program need not know which of the two it is talking to. What a key MEANS is not the console's business - that belongs to whoever is reading, the same way what is on a disk belongs to the system and what a drive is belongs to the machine. Translated only when standard input really is a terminal. Nothing else sends these sequences, a pipe holds exactly the bytes somebody put in it, and it keeps the Escape-or-Up timing problem out of every test here: a test writes the key values themselves. Line mode drops them, in both front ends, because line mode delivers characters and a line somebody else has finished editing cannot be moved about in. Press.sbx says what it was handed, in hexadecimal and by name, and reads a line before it reads keys so both halves of that rule are checked. Two recordings, one fed as standard input and one as a keyboard, agreeing byte for byte; each break fails exactly one of them. Three checks in terminal.sh type real escape sequences at a pseudo-terminal, which is the only place they are ever read as sequences: that they arrive as keys, that Escape alone is still Escape, and that a character typed straight after an escape is held rather than swallowed. Five recordings re-blessed for Press.sbx appearing on the shared disk, and the whole of that diff is the file's own line and the counts above it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
2a29cebc6b |
Make the screen come back on the machine people actually run
Found by running it: Grid exits and the shell prints its prompt into the grid, with the view up to seven pixels out of alignment. Three faults, and the first is the one that made the other two visible. MAKE RUN-VOYAGER HAD NO SCRATCH DRIVE. It gives drive 1 to Disks/personal.img, which is a file and not volatile, so there was nowhere to keep a screen - osTakeScreen answered no and the whole feature silently did not happen. It was tested with --ram-disk and shipped without one, which is as good a description of testing the wrong machine as I can write. There is now a RAM disk in drive 2, after the personal disk so that drive 1 stays the one that is yours. A PROGRAM TOLD NO MUST COPE. A refusal is not a fault, it means doing what the program did before there was anywhere to save a screen. Grid deleted its own tidying up when it started asking, so being refused left the grid on screen with a prompt written into it. It clears up again when refused, and only then. AND THE SYSTEM ALWAYS LEAVES THE SCREEN USABLE. The fine scroll registers go back to zero at every program exit, whether or not the picture could be saved: the console draws in whole cells, so a view three pixels into one puts every character three pixels out for ever. That is not part of saving a screen and should never have depended on it. Both paths are checked now. With a scratch drive the screen comes back cell for cell; without one, no grid is left behind. Breaking either fails one of them and not the other. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
ab72443b99 |
Give the screen back: osTakeScreen, and the RAM disk earns its keep
A program that takes the whole screen leaves the shell a blank one, and
whatever was on it is gone. There was nowhere to put 48K of video memory on
a machine with 64K of Data Memory that CosmOS already lives in.
A DRIVE MADE OF MEMORY IS SOMEWHERE. The screen goes to a file on the
scratch drive - the first volatile drive found at boot - like any other
file, and comes back from handleExit alongside the vectors and console mode
already put back there. The filesystem does the allocating, so this
invented nothing: it is 196 pages of tiles, map and palette, with a block
on the front holding the cursor, the four scroll registers and the mode.
NOT AUTOMATIC, and that is the whole design. Saving on every program start
would be cheap enough; restoring on every exit would be wrong, because dir
and Files and Say print and stop and their output is the reason you ran
them. A program says it took the screen, and one that says nothing behaves
exactly as every program did before this existed.
It deleted thirty lines of Grid, and they were all wrong anyway: four
scroll registers put back by hand, the map filled with spaces, the cursor
sent home, palette bank 0 written out - and the other fifteen banks kept
Grid's colours, because there was nowhere to have kept the real ones. Grid
is 64 bytes smaller and gives back what was actually there.
The check compares the screen before against the screen after, CELL BY
CELL, and allows only the rows around the cursor to differ - found from
where the text ends rather than guessed at, because the first version
assumed the cursor was near the bottom of the screen and let three real
differences through.
Two things cost time and neither was the feature:
- An edit adding "SWI osTakeScreen" to Grid was in the same script as a
failing s.index, so the file was never written - and the COMMENT
describing the call did land, from a later edit. Grid documented a call
it did not make, and read as though it should have worked.
- docs.sh caught osTakeScreen having no row in the services table, which
is the check the service layer added for exactly this and the second
time it has earned itself.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
04f1ffabd4 |
A disk made of memory, brought up by whoever owns it
THE MACHINE SUPPLIES BLOCKS AND SAYS WHAT A DRIVE IS. It says nothing about filesystems, which is what leaves room for a system that would rather have its own - and is why the volatile bit is a fact about the hardware rather than a promise about SBFS. 0x26 what the selected drive is: bit 0, contents do not survive 0x27, 0x28 how many blocks it has --ram-disk N a drive of N blocks with memory behind it A drive of memory selects, reads, writes and has a size like any other, and a program cannot tell the difference except by how fast it was. The one thing it cannot work out for itself is that the contents are volatile, because an empty disk and a volatile disk look identical from outside. THAT BIT IS THE DIFFERENCE BETWEEN A DRIVE A SYSTEM MAY FORMAT ON SIGHT AND ONE IT MUST NOT. CosmOS formats a volatile drive it cannot read, because there was never anything on it to lose, and leaves every other unreadable drive alone - an unformatted floppy is not an invitation, it is a blank floppy. Removing that check formats somebody's blank disk, which is checked rather than asserted: cosmosBlankDisk boots with one and requires it to be refused. So CosmOS grew a format. The size comes from the drive rather than from a superblock, since a superblock states a size too and that is no use on a disk which has not got one yet. Sixteen directory blocks, 128 names, chosen rather than worked out: a scratch disk runs out of names long before room, and this machine cannot divide. The RAM disk is no faster on this emulator by default, and that is honest rather than disappointing: the emulated disk has no seek time unless asked for one. With --disk-cycles 10000 the same copy is 7.94M cycles against 8.70M, the difference being every write. run.sh takes "ram:2048" where an image name goes, which needs no removing between runs because there is nothing to remove. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
6b51d6391f |
A beat a program sets for itself
The only regular thing on this machine was the screen finishing a frame, sixty times a second and not negotiable - a clock a program BORROWS rather than one it sets. Every duration became a multiple of 16,667 cycles, so a sixteenth note at 120 beats a minute, which is 125,000, is seven and a half frames and cannot be asked for at all. The way round it was to choose a tempo whose subdivisions happen to land on whole frames, which is making the music fit the machine. Examples/tune.asm says so in its own header. 0x50 Status: a period went by, it is running, it will interrupt 0x51 Control: run, repeat, interrupt 0x52-0x54 The period, in cycles, most significant first THE PERIOD IS IN CYCLES because that is what everything else here is counted in - the cost model counts them and a frame is measured in them - so a timer counting anything else would be a second unit to remember. Twenty four bits reaches from one cycle to sixteen and a half seconds, with 120 beats a minute at 500,000 in the middle, and there is no range left for a prescaler to buy. Starting loads the period; asking it to run while it already is does not, so turning interrupts on half way through a period does not silently move the beat being kept. What is left over carries into the next period, so a period of 1,000 ticks every 1,000 and not every 1,000 plus however late anybody looked. Reading the status takes the tick down and the line with it, which is the rule this machine settled two days ago about every status port. The timing check is in terminal.sh and not the manifest, and the reason is worth keeping: settle() strips cycle counts from recordings, which is right for every other program and useless for a clock. "It printed eight dots" would pass on a timer that fired them all at once. terminal.sh measures that eight periods of 125,000 come to a million within a couple of hundred cycles, and that 99.97% of them were spent asleep. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
3e48e9690d |
Put a disk of your own in drive 1
make run-voyager and make run-cosmos now attach Disks/personal.img as the second drive. It is made the first time it is wanted and then left alone: a rule with no prerequisites, so make never looks at it again. NOT UNDER build/, and that is the whole point. Everything else in this repository is made from source and can be thrown away without losing anything, so 'clean' empties build/ without a thought - and a disk of your own that a clean deletes is not a disk of your own. It is the one place here where something MADE ON THE MACHINE can live, which starts to matter the moment there are tools on it that make things. Disks/ is in .gitignore for the same reason: what you make on the machine is yours and not the repository's. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
e4f4bae762 |
Work across two disks: copy between them, and run a program from one on
files from the other Two things anybody expects of a second disk, and each needed something different. COPYING NEEDED TWO THINGS TO REMEMBER A DRIVE. The write stream is the only thing here that lives across service calls, so it is the only thing whose drive can change underneath it: every osFileBlock names its source path again and goes back to the source drive, and then osFileWrite has to come home. It records the drive it was opened on and returns there. And the file lookup CACHE. It keeps the last path resolved so a reader walking a file does not re-walk the directory for every block - and skipping the walk skipped the drive the path named, so block one of a cross-drive copy read the source's block numbers off the DESTINATION disk. It only showed on files of more than one block, because a file of one is never looked up twice. One block worked and two did not, which is a suspicious enough shape to have suspected sooner. RUNNING A PROGRAM FROM ELSEWHERE NEEDED A THIRD PLACE TO LOOK, and two restorations. The shell tried where you are and /Apps on the disk you are on. It now tries /Apps on drive 0 as well, which is what makes the system's programs work from a disk of your own - one with your files on it and no system, which is most of the point of having a second disk. The drive goes back after the load, because by then the program is in memory and the blocks it came from mean nothing; and again when it exits, because a program that copies between disks moves the drive as its own paths need to and being left wherever it finished is not what was asked for. Copy 1:/a 0:/b now leaves you exactly where you were. The fixture disk grew an /Apps, because it kept its programs at the root and so could not exercise the third place at all. Two hours of the debugging above were spent on a stale disk image. The machine boots the system that is ON the image, so a rebuilt cosmos.bin means nothing until the image is rebuilt too - and the trace said my new code never ran, which was true. Third time this project has been misled by one. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
4cc6393f5b |
Name a drive in a path
"1:/notes", or "1:" on its own for wherever that drive already was. Done in sbfsWalk, which is where every path in the system arrives - eight callers between the shell, the config reader and the filesystem - so it works for anything that takes a path rather than for whichever commands somebody remembered to change. NAMING A DRIVE GOES THERE AND STAYS THERE. Switching for the length of one command and switching back reads better and cannot work: a path resolves to a start block and a length, and those mean nothing without the drive they were read from. A load that resolved on drive 1 and then read its blocks on drive 0 would read the right blocks of the wrong disk. A name beginning with a digit is still a name. The colon is the whole of what tells them apart, and /2things is on the fixture disk to keep it that way. Two bugs, and the second is the interesting one. SUB sets carry on a BORROW, so a character below '0' leaves it set - and the test for "not a digit" branched on clear. Every prefix was ignored. Then the leading-separator test reads the first character through DP0, which sbfsPathDrive could not move because RET puts DP0 back the way it found it. It advanced SbfsPathAt and DP0 still pointed at the digit, so every prefixed path was judged relative and walked from the named drive's working directory. IT ONLY SHOWED WHEN THAT DRIVE WAS STANDING SOMEWHERE OTHER THAN ITS ROOT, because a relative walk from the root is an absolute one - so "cd 1:/2things" worked from a fresh boot and failed after "cd 1:/notes". The test does it in that order for that reason. Copying between two disks is still not one command: each path resolves on its own drive and the drive stays where the last path left it. That wants Copy to change drives between blocks. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
5644c24113 |
CosmOS knows about all four drives
A mounted disk is EIGHT BYTES - where its directory starts, how many
blocks it is, how big the disk is, and where you are on it. They now sit
together in the data segment, and changing drives is one copy out and one
copy in. The other three thousand lines of filesystem go on reading the
same four names they always have and never learn there is more than one
disk, which is the whole reason this was affordable.
The version is not in the record. It is checked at mount and thrown away,
because a version one disk's zero parent already reads as "in the root".
Every drive is mounted at boot: the controller says how many are plugged
in and each is tried in turn. One with nothing in it, or a disk this
cannot read, is left unmounted rather than stopping the others, so a
machine with a good disk in drive 0 and a blank in drive 1 starts.
'drive' says which one, 'drive 1' goes to another, and the working
directory goes with it - where you are on a disk is part of which disk you
are on. A drive the machine has not got is refused, and refused
differently from one that is there with nothing readable in it.
Three things the assembly caught me on, all the same misunderstanding of
what survives a call:
- OR reads A and B, and the bit came back from sbfsDriveBit in Q, which
RET does not disturb - but RET does put A back. The mounted mask never
got set and drive 0 was reported unmountable.
- MVQA then RSTA throws away the copy it just made, so doubling a bit
doubled nothing. SHL does it in one instruction, because A and B are
one register to it.
- There is no move from A to B. INB reads a port straight into B, which
is what the drive count comparison wanted.
run.sh takes more than one image now, separated by a plus, since the
machine has four drives and a test that could only name one could not
check any of this.
The buffer note is forgotten on a drive change and that is DELIBERATELY
kept although nothing can currently reach it: only the file read-ahead
consults it, a directory scan does not, and finding a file requires a
scan which overwrites the note on the way past. Two disks were built with
the same file at the same block to try to catch it and the answer was
right either way. Three instructions to hold an invariant rather than a
story about a bug - and the comment says so instead of claiming a fix.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
b1538e0618 |
Give the disk four drives, behind one controller
SEVERAL DISKS ARE ONE CONTROLLER AND NOT SEVERAL DEVICES, and the instruction set decided that rather than taste. A port is an immediate byte inside the OUT that names it - portOut takes it from Program Memory - so a program cannot compute one. "The disk on port 0x20 plus drive times four" is not something this machine can say, and two disks as two devices would mean a branch on the drive number in all eleven places sbfs.asm names a disk port. A drive register is what a floppy controller has always been. 0x24 Drive, which the block, command and status registers refer to 0x25 Drives, read only: how many are plugged in --disk given more than once fills them in order. What is per drive is the image, its size and its write protection; the block register, the status and the one buffer belong to the controller, which is the same division real hardware makes. A drive that is not there is refused rather than wrapped, because wrapping means a program asking for a drive this machine has not got quietly reading the one it has - the same shape of fault as taking a bank number somebody else was using. An EMPTY drive is a different thing and is selectable: a controller has its drives whether or not there are disks in them, and reading one fails with the error bit the way an empty drive should. Changing drives finishes whatever the one being left was in the middle of. A transfer waits for the clock, so one may be owed at any moment, and running it against the disk that is arriving would be a fault with no owner. Also stops parseOptions setting its defaults field by field. It was nine assignments beside a struct, and a list beside a thing drifts from the thing: adding two fields left them holding whatever was on the stack, so a machine given one disk was told it already had four drives. It is one zeroing now, and a default that is not nought can be written under it where it reads as the exception. That struct growing a field once before left Voyager linked against an object that disagreed about its size. Nothing in CosmOS uses any of this yet. The mount record is next. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
3b650cabcd |
Grid took the disk's bank number, and gave the screen back untidy
Found by playing with it: after running Grid, the shell could not start anything by name and dir said the disk was empty. Several commands after the program that did it had exited, and nothing had said a word. BANK NUMBERS ARE ONE NAMESPACE FOR THE WHOLE MACHINE. Grid registered video memory as bank 3, which is the number CosmOS gives the disk's buffer when it mounts - and that does not fail, it succeeds. Every read the filesystem made afterwards came out of video memory. Grid uses 4 now, and the CosmOS README has a table of who owns what, because the one place this was written down was a line in a service description about sbfsMount. Nothing hands bank numbers out and nothing refuses one that is taken. If programs start wanting banks routinely, a service that allocates them is what should exist rather than a longer table - noted there rather than built, since one program wanting one bank is not yet a system. Also puts the cursor home on the way out. The map was emptied and the console was not told, so the shell carried on writing from wherever the cursor had been standing when Grid started - twelve rows down a screen with nothing on it. Clearing is what homes a cursor and it costs one write. The regression test runs a program by name, then Grid, then the same program again; the second one is the check. Putting Grid back on bank 3 fails it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
1aa45fcfc4 |
Grid: fill the map, not the window
Scrolling sideways walked off the end of what the program had filled, so the grid went blank for six seconds and then came round again. A map row holds 128 cells - 256 bytes at two a cell, whatever mode the screen is in - and an eighty column screen shows eighty of them, so 48 were empty. This is the third thing this loop has counted and the first right one. It said forty, which filled half the screen. Then it asked the screen how wide it was, which fixed what could be seen and was still wrong. ASKING THE SCREEN IS RIGHT FOR FILLING A SCREEN AND WRONG FOR FILLING A MAP: a program writing one screenful wants the window, and a program that scrolls wants everything the window can be moved over. There is no register for that because it is a property of video memory rather than of the display. The check that should have caught it did not, and that is the more useful half. periodic.py looked at 32 pixels - four cells at the left edge - so it could not see a gap that was on the right, and at the cycle count it samples the origin had moved to column 22 and the gap was off in the middle distance. It reads the whole scanline now and says which column the picture stops repeating at, which is how the two failures above were told apart. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
bcd42e75ca |
Scroll the screen sideways, and by less than a cell
The screen could move one way, a cell at a time. Three registers were missing and this adds them: a column origin so the map can be wider than the screen as well as taller, and a pixel remainder for each axis so the step can be one pixel rather than eight. 0x36 Scroll column, in cells, wrapping at 128 0x37 Fine X, 0 to 7 pixels 0x38 Fine Y, 0 to 7 pixels FINE DOES NOT CARRY INTO COARSE. Writing 8 to a fine register writes 0, because only its low three bits mean anything. The alternative was for a write of 8 to step the coarse register, and it was rejected for one reason: a program that scrolls has to know where it has got to, and if the hardware carries then the only way to find out is to read the register back. Keeping them apart means the program already knows, because it did the arithmetic itself. It is also what the machines this one is pretending to be did. The renderer now draws one more row and one more column than fit and clips them, because with a fine offset the screen no longer begins on a cell boundary and the cells at two edges are partly off it. videoPutCell follows the column origin as it has always followed the row - a caller means a cell of the SCREEN, and the screen is a window onto the map. The fine offsets are deliberately not applied there: they move the finished picture by less than a cell, and there is no such thing as less than a cell to write into. So a program may scroll to any pixel without the console's idea of where row three, column five is moving underneath it. Grid now scrolls diagonally, a pixel a frame, in four port writes and two carries. It moved eight pixels every fourth frame before, which reads as the picture jumping rather than travelling. Seven checks, each one the same program with one register changed, so what is compared is where the picture stopped. Breaking fine X, fine Y, the column origin, the three-bit mask, or the console's use of the origin each fails exactly one of them. Grid's own two checks had to be rewritten, and the reason is worth keeping: they asked whether pixel 4 was a grid line, which was really a check that the scroll happened to be at a cell boundary. A picture that moves a pixel a frame can only be asked things that are true at every offset - that it repeats every eight pixels, and that one band of eight rows holds different colours from the next. Also repairs docs.sh, which found the minimal CosmOS application by taking the first asm block in the README. Documenting a program with an example above it made that a different block, and the check complained that the minimal application had no #Base about something that never claimed to be one. It looks under System Services now. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
848103f5e4 |
Grid: ask the screen how wide it is
It said forty and filled exactly half of an eighty column screen. CosmOS asks for the wide mode when it starts, because its own help text is seventy-four characters across. So a program that assumes the shape the MACHINE wakes up in is wrong about the shape the SYSTEM is running in - and the Programming Manual says as much where it describes the columns and rows registers: how big the screen is, is asked for rather than assumed. Port 0x32 says. One instruction, and the program now fills whatever it is given. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
1a8a5efe03 |
Grid: the first program to use the screen as a screen
Everything drawn on this machine so far has been text or a bitmap. The tile
engine has been there since the screen was built and only the console had
touched it, and only ever to put a letter in a cell - the one thing it can
do that a plain character display could do too.
Grid redefines a tile, fills all 128 map rows with it, and scrolls by
writing ONE BYTE A FRAME. Nothing moves. The rows above and below the
screen are already drawn, so a screenful of movement costs one OUTA and the
rows that leave the top are still there.
Its tile goes at 200 because the machine wakes with the font in tile memory
- glyph n at tile n, for 135 of the 256 - so a program starting at zero
paints over the alphabet and the shell it is about to hand the machine back
to. Its sixteen colour bands are one tile and not sixteen: the attribute
nibble is added to every index in a cell, so the same 64 bytes come out in
sixteen colourings.
Three things it cost, all of them the same lesson about this machine:
- "SETD.0 X" then "STD.0.1" stores through DP1, which had not been set
yet. It assembles, and the blit then reads its 64 bytes from wherever
DP1 was last left, so the tile came out as noise.
- The palette entry for scheme n is at 0xFC00 + 64n, which reaches
0xFFC0 - four pages, not one. And doubling A by adding B needs B to
hold A, which RSTB is the opposite of. Both went away by writing all
256 entries in order and letting the controller step the address, so
nothing computes an address at all.
- The screen it hands back had the right cells and the wrong colours,
because restoring the map is not restoring the palette.
That last one is a gap in the machine rather than in this program, and is
written up in the CosmOS README. The console's colours live at exactly the
entries the attribute nibble lands on, so any program using the nibble
overwrites them and has nowhere else to write. Grid puts bank 0 back - grey
on black - and leaves the other fifteen. The real answer is a command to
the screen meaning "give me back what you woke up with", the way the
console has one for clearing. There is not one, and this is the first
program that ever wanted it.
Two checks in video.sh, which boots the whole system and reads the pixels
the renderer produced rather than trusting what the program believed.
Breaking the tile fails one and breaking the attribute fails the other.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
0e0731e2b1 |
Put the cursor home when the screen is cleared
A screen with nothing on it and a cursor half way down it is not a cleared screen: the next thing written lands where the last thing happened to leave off, at a position whose meaning was just erased. The shell's clear did exactly that, and left the next line one row below wherever it had been. Both halves were missing. consoleClearScreen blanks the cells and does not touch cursorRow or cursorColumn, and 2J on a terminal empties the screen without moving anything - H is what puts the cursor at the top. Life and Snake never showed this because they follow their clear with an explicit 1;1H of their own. They were working around it, which is why the bug survived until a command cleared the screen and then let somebody type. The attribute is deliberately not reset. Clearing is about what is on the screen rather than how the next thing will be drawn, and a program that chose a colour and then cleared still wants that colour - which is what a terminal does too. Two checks in video.sh, and they took two goes to make independent. The first pointed at the row where the letter lands when the cursor is NOT homed, so removing the clear and removing the homing failed the same pair and neither said which. The second now looks at a row nothing writes to either way - and at a letter whose ink actually reaches the pixel it reads, which "two" did not, so it passed on a screen that had never been cleared. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
553882d28d |
Start CosmOS with a script, and let a script hold its tongue
Three things scripts wanted, and they are one thing: a machine that can have a face. /System/Boot/startup.sh runs before anybody can type. Every way of reaching the prompt for the first time goes through it, including the one where there is no disk - in which case there is nothing to find and nothing is said. A MISSING one is ordinary and silent, because a clean install has none and a machine that complained every boot about a file nobody wrote would be teaching its owner to ignore it. One that is THERE and does not begin with #! is the other case entirely: somebody meant that to run. #quiet stops each line being echoed, #loud puts it back. The prompt and the echo go together, because together they are what makes a script look like typing, so a quiet script gets neither and what it prints is all that appears. A nested script inherits quiet - a build that asked for it meant its helpers too - and gets its own setting back when the helper returns. Anything else beginning with # is handed to the shell, which does not know it and stops the script, because a script that asked for something this shell cannot do should not carry on as though it had been given it. clear empties the screen, which the console has been able to do since before there was a screen to do it on. THE PROMPT IS NOW SAID BY WHOEVER SUPPLIES THE LINE. It used to be said at the top of the loop, which is a decision made before the line is read and an answer not known until after - and it was wrong at both ends. #quiet is itself a line, so its prompt went out before anything knew to stay silent; and the line after a quiet script's last one comes from the console, having already been denied one. Off by exactly one line in opposite directions. A first attempt at this remembered whether the prompt had been skipped, which worked and was a flag standing in for a structure. The monitor's assembler prints a prompt of its own, so it reads through shellReadRaw, which is the same source without one. One admission. Handing the console its prompt back when a quiet script ended was a real fix when I wrote it and stopped being one an hour later, because the restructure above means the console's own path prompts whatever the flag holds. The comment claimed it fixed something. Breaking it on purpose changed nothing, which is how that was found, and it is now a comment saying so instead of a line pretending to work. The startup fixture ends QUIET on purpose: nothing puts the flag back when the outermost script finishes, so a script ending #loud would have tested the easy half. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
c28826df77 |
Let a script run a script, four deep
A build script calling a setup script is the first thing anybody tries. What is saved when one script starts another is A POSITION AND NOT A BUFFER: the name, which block comes next, how many are left, and where in the block it had got to. Seventy bytes, and they sit next to each other in the data segment on purpose so that saving them is one copy. The block itself is read again on the way back, which costs one disk read per return and saves 257 bytes a level - the inner script reads its own block into the single buffer there is, so coming back means fetching the outer one's block again and landing on the byte it left. The slot is reached by stepping rather than by multiplying, because this machine has no multiply and the depth is never more than three steps. Four levels. Deep enough for a script calling a script that calls a helper, shallow enough that a script running itself says so rather than filling memory. A line that fails now stops every level and not just the innermost, because a build whose helper failed should not carry on in its caller. The caller's place is saved BEFORE the new file is looked at, and put back on every way out that is not success. Opening writes the name into the live state in order to ask the disk about it, so by the time "there is no such file" is known, the caller's place has already been overwritten - a failed 'do' inside a script would otherwise leave the script that ran it reading from a name it never chose. The test resumes in the outer script's SECOND block, which is the case the whole design turns on and the one an ordinary nesting test would miss. Breaking the re-read, the save, or the limit each fails it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
a12d61fb80 |
Give the shell an echo, so a script can say what it is doing
Say.sbx has printed words since long before there were scripts, and is the wrong shape for one. It is a program: it has to be found on the disk, loaded and started, it prefixes what it was told with "it says:", and the system prints "finished" after it. Three lines of noise around one line of narration, and a load off the disk to produce them. echo is a command, so it costs a comparison. With nothing after it, a blank line - which is what anybody expects and is worth having to space a long script out. Not called "say", although that is the better word. Built-in commands are tried before the disk and always win, so a built-in say would shadow Say.sbx and quietly change what every existing script and test meant by it. Also puts "do" in the help, which the commit that added it forgot, and splits the help text: the new lines pushed it over the assembler's 255 character limit for one string. That failure was hidden for a few minutes by a 'make' whose errors were going to /dev/null - the build kept the disk it already had, and the machine cheerfully reported "I do not know: echo" from a system assembled before echo existed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
2466d79d9c |
Let the shell run a file of commands
'do <file>' runs the lines in a file as though they had been typed. The
only thing a script changes is where the next line comes from: everything
below shellReadLine - splitting the line, matching it, loading a program -
cannot tell the difference and does not have to.
What makes a file a script is '#!' on the front of it, not its name and not
a flag in its entry. The rule this filesystem keeps is that an entry holds
only what the content cannot say about itself, and a script can say what it
is; the loader already refuses anything that is not SBEX, so the two kinds
of runnable file turn each other away without either knowing about the
other. It is also the deferred half of the file-typing design, which said
to wait for a second kind of runnable thing before building any of it. This
is that second kind.
'#' is a directive and ';' is a comment, as in SplitBit assembly - one rule
across the machine rather than two dialects. Not Unix's convention: there
'#!' really is a comment that only the kernel reads, while here the shell
requires it and refuses the file without it, so calling it a comment would
be a lie about what it does.
A script stops at the first line that does not work, which is what the
LineFailed groundwork was for. Comments and blank lines are dropped by the
reader rather than by the dispatch, so they are not echoed either. A script
running out hands back to the console rather than ending the shell, because
running out of file and running out of typing are not the same thing. The
interactive assembler reads through the same path, so a script can contain
a block of assembly.
Three things this cost that were not obvious:
- RET puts A and B back, so a routine cannot answer in them. scriptByte
returning the character in A assembled, ran, and handed the caller its
own A back every time. It answers in memory now.
- A last line with no newline is still a line. Text files do not reliably
end with one and an editor eating it is a bad way to find out a command
did not run.
- Not LastStatus. See the commit before this one.
Six checks in three tests, two of which are about byte positions rather
than behaviour - a command lying across the boundary between two blocks,
and that missing newline - so their fixtures are generated rather than
committed, where an editor cannot helpfully repair them.
Nesting is not in yet: a script cannot run a script. That wants a stack of
positions rather than the one the reader keeps.
Also derives native.sh's self-hosting source list from cosmos.asm's own
#Include lines. It was a hand written list and went stale the moment
script.asm existed - the fourth time a list beside a thing has drifted from
the thing - so it now asks the thing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
fc56e815fc |
Have the shell remember whether a line worked
Groundwork for scripts, and invisible until there is something to read it: the suite passes unchanged, which is the point of doing it on its own. A script has to decide whether to run the next line, and nothing in the shell knew whether the last one worked. LineFailed is cleared as each line is read and set by the fourteen paths that fail. Cleared at the start rather than set at the end, because there are thirty seven ways back to the prompt and only fourteen are failures - and the twenty three successes would have to be found again every time a command grew a new way to finish. A command that says nothing worked. Twelve of the fourteen already funnelled through fileComplain, so this is fourteen lines rather than the refactor it looked like. It is deliberately NOT LastStatus, which was the obvious place and is wrong. That one is a program's own answer, reported by the status command and recorded by two tests; clearing it as each line began wiped the answer before the command that reports it could read its own line. The tests said so immediately. Two questions, two bytes - and a program exiting non-zero now sets both, because a program answering "no" is one of the ways a line can fail. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
e52d8d84f8 |
Collapse the two makefiles into one
Programs/makefile is gone and everything it did is here. The split was not paying for itself: nothing at this level ever ran that file, so it rotted, and all three bugs found in it this week share that one cause. It named two source files that had been renamed months earlier and failed outright. The disk did not depend on the tree it mirrors, so a new file silently was not on it. And the disk was in no default target, so 'make clean' threw it away and 'make' did not bring it back - which is what prompted this. The platform and the system stay separate, as TARGETS rather than as files: 'make SplitBit Assembler' builds the machine and its tools, 'make cosmos' and 'make disk' build the system, and somebody who wants to write their own system can ignore the second group entirely. That boundary is now one make enforces, which the directory boundary never did - Tests/makedisks.sh has always reached across it to build its own fixtures. 'make' now builds a bootable disk as well as the tools, because a machine with nothing in the drive does not do anything and the first thing anybody wants after building this is to watch CosmOS come up. It costs half a second: the whole system, twenty six apps and the native assembler assemble in less time than the emulator links. Two things the merge needed that the split did not. Assembling now takes an order-only dependency on the assembler, which came free when you had already built the tools before changing directory. And the mirror is told which directory to walk: it was ".", meaning Programs/, and left alone it would have meant the whole repository - the C sources, the tests and the manuals mirrored onto a disk for an 8-bit machine. The disk comes out at 188 files where it was 189. The one that went is Programs/makefile, which was itself being mirrored onto it as /Source/makefile. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
2f22807458 |
Give the demo a real tune: the Anachronaut Labs theme
The composition is the user's - a leitmotif they already have variants of, written into the note table by hand. It replaces the eight note scale that was there to prove a note could be played at all, and it is a better demo for the obvious reason and one less obvious one: it is long enough to hear whether the machine keeps time, which a run of eight notes is not. Forty five notes, 567 frames, 9.45 seconds, peaking at 19,461 of 32,767. The test budget goes to twelve million cycles, which is a duration rather than a guess: at 16,667 cycles a frame the music is 9.45 million, so there is room to add bars before anybody has to come back here. Also records what borrowing the screen's frame actually costs, which came out of writing music rather than out of theory. The frame is not too slow, it is FIXED: every duration is a whole number of 16.67 ms, so a note worth a third of a beat cannot be written, and the way round it is choosing a tempo whose subdivisions land on whole frames - making the tune fit the machine. That is the argument for the timer peripheral wanting an arbitrary tick rather than a faster fixed one, and for the screen not being the clock: a display refresh and a music routine have no reason to share a rate. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
85329f13c3 |
Take a device's line down when its status port is read
A device raises a line and something has to take it down. Two things did: being interrupted, and being woken from WAIT with the Interrupt Flag down - the second because a masked program has nowhere to dispatch to, so nobody else would. There was a third way to learn a device had finished and nothing answered it. The documented idiom reads the status, branches out if the device is already done, and only WAITs otherwise; on a disk quick enough to finish before the first look, which is every disk here, the WAIT is unreachable. The line then stood for the rest of the machine's life. The program that leaves it standing never pays for it - it was masked throughout. The bill arrives at whoever next sets the Interrupt Flag. The boot chain reads the disk to load a program, leaves the line up, and hands over; the loaded program is then interrupted on behalf of a read that finished before it existed, through a vector table with no entry for a device it never touched, and faults on the instruction after its SIF. Found by running Examples/tune.asm through Once. It set up its whole sound and died four bytes before its first note, which is why it was silent rather than wrong - and why it looked like a sound bug for a while. So reading the port that answers a device takes its line down, the same way taking the byte already took the console's down. Disk and screen do it on their status port. And a reset now clears every line, which is the sentence the manual already makes about the vector table: a handler left behind aims an interrupt into a program that is no longer running, and so does a line. testPrograms/diskLineTest.asm pins it - the racy idiom, then SIF with no handler installed anywhere. It faults without the fix. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
62a657f1a7 |
Give Voyager a speaker
The device already made the samples; this takes them out of its ring and hands them to Raylib, a sub-buffer at a time. Nothing here decides what a sound is, the same as nothing in presentFrame decides what the screen looks like - which is why the headless binary and this one make the same sound, and why the suite can check a device with no speaker in it. Asked for rather than assumed: a host with no audio device still gets a window, because a machine worth looking at should not need one to start. When the ring runs short the missing samples are filled by holding the last one rather than by zeroes. It is still a glitch; a jump to silence and back is a click, and a held level is not. Also removes a comment that had been left in twice above the frame loop. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
8366bf7721 |
Fix the Programs build, and make the disk depend on what it mirrors
Two faults, both introduced by
|
||
|
AnachronautandClaude Opus 5
|
d388cd3122 |
Give the machine a sound device
Four channels on ports 0x40 to 0x4F, each one a whole soundThing voice:
two oscillators, two envelopes, a filter and the routing between them. A
channel keeps its patch between notes, so a program sets an instrument up
once and then plays it.
Six ports rather than forty, because a voice has around forty settings and
four of them would spend more than half the port space on one device.
There is a selector and a value instead: say which channel, say which
setting, write it. That is three writes to change a setting and two to
play a note, which is the right way round - patches are loaded, notes are
played in an inner loop.
Samples come from the machine's clock and not the host's: 48,000 a second
of emulated time, worked out in whole numbers so it never drifts. A
million cycles is exactly 48,000 samples on any host at any speed, which
is what makes a sound something a test can compare. --sound writes them
out, the way --screen writes a picture, for the same reason: the suite has
no speaker.
Tests/sound.sh is 22 checks and found three real defects the first time it
ran, all the same shape - a synthesizer written for a patch editor, wired
up as hardware and inheriting the editor's assumptions:
- Only one voice had an oscillator switched on, so three of the four
channels could not make a sound whatever was written to them.
- That voice's oscillator arrived at full gain and every other one
arrived at nothing, an asymmetry with no reason behind it.
- A note with no sustain is silent but not over, so the obvious way to
wait for a sound to finish waits for ever.
The first two are fixed by the device defining its own power-on state
rather than inheriting synthInit's: every channel arrives able to make a
sound, so writing a note number is the whole of playing a note. The third
was already written into the manual as advice, an hour before the check
existed. The check disagreed with the documentation and the check was
right; the manual now says the one rule, which is that a note sounds until
the gate is dropped.
Programs/Examples/tune.asm plays eight notes, taking its tempo from the
screen's frame interrupt because that is the only regular beat this
machine has. It spends 99.8% of its cycles asleep in WAIT.
Voyager has no speaker yet - this is the device and its tests. Playing the
samples out of the window is the next commit.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
b0d06aa6e5 |
Make the vendored synth plain ASCII
soundThing's comments use em dashes and an arrow, and this repository is plain ASCII throughout because the tooling around it does not do Unicode. Tests/docs.sh caught it the first time it ran against the new file, which is what that check is for. Comments only; nothing the compiler sees has changed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
f58b0f93af |
Vendor the voice engine, with the level it always had and could not say
soundThing's synth.c and synth.h, and nothing else of it: the voice engine pulls in maths, stdlib, stdint and stdio and knows nothing about Raylib, MIDI, patches or the interface, which is what made it liftable. Copied rather than submoduled - two files against tying this build to another repository's history is not a close call - so the header carries the whole of the difference and is meant to stay current. A VOICE'S LEVEL IS A ROUTING NOW. Envelope 0 was multiplied into the output unconditionally, so routing it to a filter or an oscillator meant it shaped the volume as well whether that was wanted or not, which is most of the trouble with making percussion. There was no flag to turn that off and there never had been: Envelope is the only one of the four modulating things without an active flag, where LFO, Filter and Oscillator all have one. It could not take the filter's shape either. filterTick returning its input unchanged is the right nothing-happens answer, but an envelope returning a constant would be useless as a mod source - and being a mod source while NOT being the volume is exactly the thing wanted. So the voice names the source that shapes its level, the way every other destination names its source, and MOD_SOURCE_NONE means nothing shapes it. Two things fall out that were not possible before: envelope 1 shaping the volume, and an LFO doing it, which is tremolo. Envelope 0 still decides how long a voice lasts, because it still ticks. A voice with its level unrouted will therefore cut rather than fade when the envelope reaches idle - fine or wanted for percussion, a click if the oscillators are loud at that moment, and a one line change to end on note-off instead if it turns out to matter. NOISE COMES FROM A SEEDED GENERATOR, one to each thing that makes it. rand() is global state shared with the whole process and varies between C libraries, so the same program sounded different on different machines and no recorded result could have meant anything. One generator each rather than one shared, because two noise sources drawing the same stream are not two noise sources. Checked rather than assumed: two synths from the same start produce identical samples, and 4,617 of 4,800 of them are non-zero, so it is noise and not silence. AND A CHANNEL IS THE CHANNEL YOU ASKED FOR. synthNoteOn hunts for a free voice and steals round-robin, which is what a keyboard wants and what the standalone synthesizer still does. Channel two is channel two. Both old calls are untouched. Nothing links it yet. It compiles clean and standalone under -std=c11 -pedantic, which is what make strict already checks, and the 169 tests are unmoved because nothing calls it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
33afc20abc |
Give the memory controller to a bus rather than to the machine
The third and largest piece of the peripheral core, and like the two before it nothing changes: 169 tests, and the two that would notice a misroute pass loudest of all. A CONTROLLER IS THE MOST STATEFUL THING ON THIS MACHINE - a source bank and address, a destination, a length, five guard registers and a table describing every bank it can reach. Two processors sharing one would interleave into nonsense: one sets a source, the other sets a destination, the first issues a blit and moves the wrong bytes somewhere else again. No arbitration fixes that, because there is nothing to arbitrate - both writes were legal and the result belongs to neither of them. So it is a struct threaded through all seventeen functions that touch it, rather than a pointer to a current one set on the way in. The smaller change was tempting and is the shape that produced the stale reset flag and the editor's IsNew surviving a second run, both this week: state that has to be set on the right path before anything reads it. A controller is where that goes wrong quietly rather than loudly. THE STATICS WERE DELETED RATHER THAN LEFT, which is what made this safe to do mechanically. A missed reference is a compile error rather than a variable that still exists and serves the wrong core, so "did I catch all 165?" stopped being a judgement and became a question the compiler answered. Two things the transformation nearly got wrong, both caught by reading rather than by building. guardStart and guardEnd are fields of Bank as well as registers of the controller, so banks[n].guardStart had to keep its name while a bare guardStart changed - the difference between a fence and the register about to be written into one. And a definition and a call look alike enough that the first attempt turned publishBank(number) into publishBank(Controller *c, number); definitions start at column zero here and calls never do. Tests/agree.sh is what says this is right, more than the count does. It builds the same disk with SplitDisk and with CosmOS and compares byte for byte, and every filesystem operation on the machine goes through the controller - so a blit that went to the wrong place would corrupt a disk that is checked against one built by different code entirely. Tests/cycles.sh covers the other half, since what a transfer costs depends on pendingCycles landing in the right one. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
5be5bea994 |
Make the interrupt lines belong to a bus rather than to the machine
The second piece of the peripheral core, and like the first it changes nothing: one array of bits became a struct, and the machine's own devices reach it through wrappers because every one of them really is on this bus. IT WAS ONE ARRAY INDEXED BY PORT FOR THE WHOLE MACHINE. With two processors that is not a tidiness problem, it is each of them seeing the other's lines: a disk finishing would interrupt a sound core, a sound core's tick would interrupt the shell, and both would arrive at a handler installed for something else entirely. Hardware vectors are per port, so the numbers would even look plausible on the way in. Unlike the shift register, which was harmless until there was a second core to share it with, this one was always going to be wrong the moment there was one. Still to come on this rung: a controller each, since it holds the source, the destination, the length and five guard registers, and two cores setting those between each other's instructions would interleave into nonsense. Then the interleaving rule, which belongs in the manual as machine behaviour rather than as something the emulator happens to do. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
4e3258e3f7 |
Put the libraries on the disk, and say which include is missing
Sieve-16.asm, Life.asm and Fib-16.asm could be read on the machine and not assembled on it. All three #Include print.asm, and print.asm was not on the disk. /LIB WAS STILL A HAND-WRITTEN LIST. Programs/Libraries is what an #Include means when it is not a CosmOS source - print, the integer helpers, the maths - and nobody had thought to name them, which is the exact failure mirroring the sources was meant to end. It is mirrored now, so the next one nobody thinks of is there anyway. AND THE ASSEMBLER SAID NOTHING USEFUL. A missing include returned a failure and printed no message, so the catch-all at the top said "nothing was written", which is true and useless - finding out why meant reading the assembler rather than the message. It names the file now, and where it looked: cannot find print.asm, not beside the file that asked and not as /Lib/print.asm Both halves are worth having, because a name that is in neither place is usually one or the other spelt wrong. The same shape as More's "error 2": a program that knows exactly what happened, reporting a number or nothing at all. The disk also depends on the recipe that lays it out now. It did not, so adding the libraries left an image built without them and the next run reported the same thing missing - which sends you looking at the change you just made rather than at the stale thing in front of you. It cost twenty minutes to notice. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
dae3455da0 |
Give the CPU a bus, so that there can be more than one
The first piece of the peripheral core, and it changes no behaviour: the machine still has exactly one processor, and every one of the 169 tests still passes. What changes is that the code has stopped assuming so. FIVE THINGS A CPU ASKS OF THE WORLD OUTSIDE ITSELF, and every one of them was a call to a function there was exactly one of: the port handlers, what the controller spent moving memory, what was spent stopped waiting on a device, and the two that work the interrupt lines. Fine for a machine with one processor and wrong for a machine with two, because A PERIPHERAL CORE'S BUS IS ITS OWN - it sees the devices its own device gives it, raises its own lines, and stalls on its own controller, none of which are the host's. They are gathered into a Bus that the CPU holds a pointer to, rather than threaded through as a bus number, because a bus is something a device PROVIDES. A device that provides one should hand over the answers rather than be looked up by an index somebody else has to keep right. initializeCPU puts the machine's own there, which is what every processor was on when there could only be one, so nothing at any call site moved. And shiftRegister is a local now. It always was one in effect - written and read inside a single instruction and never carried to the next - but it sat at file scope, where a second processor would have shared it. Two cores taking each other's shift halfway through an SHL is a poor thing to discover later, and it cost two braces to make impossible. Still to come on this rung: the interrupt bitmap, which is one file-scope array indexed by port for the whole machine; a controller each; and the interleaving rule, which has to be written into the manual as machine behaviour rather than left as something the emulator does. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
f2e26c1852 |
Stop a pending reset outliving the reset it belonged to
Reset out of picture.bin and CosmOS booted and then halted at once, having been told there was nobody at the keyboard. The button set two things: the machine's reset request, and a flag of the window's own that said "end the next console read, so a machine blocked on a key can get to the point where it notices". The second was only cleared when the console actually asked - and picture.bin never asks. It draws and halts. So the flag survived the restart and answered the NEXT machine's first read with the end of input, which for CosmOS means stop. There is one fact and it now lives in one place. The window asks whether a reset is still waiting rather than remembering that it asked for one, so the read ends only while a restart is genuinely on its way and goes back to normal the moment it has happened. The local flag is gone. Two pieces of state meaning one thing, one of them cleared on a path the other did not need - which is the same shape as the console's line editing flag surviving a second run, a fortnight ago. Worth noticing twice. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |