4e61158b11ce5c967650abf09a39a8d074d6974e
344
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Anachronaut
|
d6cbbb5034 |
Strike the three review items that are now fixed
The streamed commit is bounded, the memory map is checked against itself, and the save guarantee says what it is. Three left: the temporary-file namespace, one path length both implementations agree on, and a bound on directory entries that keeps every one of them nameable as a parent. |
||
|
Anachronaut
|
9e2aa0122e |
Say what a safe save actually promises, and where it stops
Both sbfsSaveFile and sbfsStreamDone write a temporary, delete the original and rename the temporary onto its name, and the README explained why that order and not the obvious one. It never said what the resulting guarantee is, which invited the stronger reading: "safe save" sounds like it survives anything. It survives everything that goes wrong while it is running - no run long enough, no free blocks, a refused write, a name that turns out to be a directory, a writer that gives up - and in all of those the original is untouched. It does not survive the machine stopping, because the commit is two block writes with a gap between them: stop there and the old file is gone and the new one is still called sbfs.part. The bytes are all present and one rename by hand recovers them, but nothing does that on its own. Written down in the README beside the ordering it qualifies, and at both commit points in sbfs.asm, where a reader is when the question occurs to them. Closing the gap wants a journal or a second directory, which is a lot of disk for two writes; a boot-time consistency check is the cheaper answer if it ever matters, and it would want temporaries flagged in the entry rather than recognised by name. |
||
|
Anachronaut
|
aa7bdc6acd |
Check the memory map against itself, not only against the code
The CosmOS README's Data row gave the system 0x0000-0x3FFF and a loaded application 0x2000 and above: two columns of one row that cannot both be true. Program was doubled to 0x3FFF when CosmOS outgrew its first map and that number was copied into the Data row as well, where the answer is 0x1FFF. docs.sh measured both segments against the CosmOS column and passed the table anyway, because it never read the column beside it. A number checked against the code and not against the number next to it is still unchecked, so it now reads both and compares them - and compares two further copies of the same fact that had gone stale on their own: the minimal application in the README, still based where applications lived before the doubling, and the map cosmos.asm opens with, which somebody reading the system reads before they read the README. Each of the three checks was confirmed by breaking the fact and watching it fail; the first reproduces exactly the text this commit removes. While in that header, the command list said five commands and CosmOS has eleven and a search path besides, and "dump is next" outlived the monitor. |
||
 AnachronautandClaude Opus 5
|
db3d349da8 |
Read the next block while the program is busy with this one
A file is read front to back, so when something asks for a block, the one after it is almost certainly wanted next. sbfsReadOne asks the disk for it straight away and hands back the block that was wanted - so the transfer happens while the caller is busy, and the waiting is mostly over by the time it comes back. Printing a fourteen kilobyte file: 1,064,498 cycles at two thousand a block becomes 976,882, and 1,576,562 at ten thousand becomes 1,032,889. The second figure barely moves between those - seven per cent from an instant disk to a slow one, where without it the same change costs sixty eight. A machine that reads ahead stops caring very much how fast its disk is. NOT FOR DIRECTORY SEARCHES, and that was tried first and thrown away. A scan stops the moment it matches, so the block it would read ahead is one nobody will ever look at - a transfer to fetch and another wait to throw away. It was nineteen per cent SLOWER on a lookup at ten thousand cycles a block. Reading ahead is a bet that the next block is wanted, and a search is exactly the case that hopes it is not. The scan loop is untouched. Three per cent is what it costs when the disk is instant, which is the bookkeeping with nothing to hide behind it, and the default. The disk has one buffer, so the only way to know what is in it is to remember what was last asked for. Every read records that; a write clears it, because a write fills the buffer from memory and no read asked for what is in it. Getting that wrong would blit whatever happened to be there and call it the block somebody wanted. The read ahead is bounded by the file's own length, so reading the last block does not fetch whatever follows the file on the disk - which belongs to somebody else and would be paid for twice, once to fetch and once to discard. It cost one bug, and an instructive one: the next index was worked out by stepping SbfsIndex, which is the CALLER'S and is still wanted after the return - handleFileBlock compares it against the file's length to see whether this was the short last block. Every block reported the wrong number of bytes, and the output of Type skipped five lines in the middle. It has a place of its own now. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
d4cba36c5e |
Devices that take time, and a filesystem that waits for one
The disk's status has always had a bit meaning "still going", and the header beside it has always said to honour it. Nothing did, because nothing could: the host finished the transfer inside the instruction that asked for it, so the bit could never be seen up and asking about it was asking about something that cannot happen. --disk-cycles gives it a latency. The command is still checked at once, because a refusal is not work - a block that is not there fails before any head moves - but the transfer is remembered and done when the machine has run that far. Until then the buffer holds the block BEFORE this one. That last part is the point. A program that does not wait gets the wrong bytes rather than an error, which is the failure the bit exists to prevent and the one that would never have shown up. With a latency of two thousand, CosmOS could not even mount: sbfsMount reads block zero and looks straight at the buffer. deviceTick is the general shape rather than a disk feature. Called once per instruction with the machine's clock, it lets anything whose moment has come finish - which is what a display that refreshes, or a port that waits on the host, would want in exactly the same way. The filesystem watches the bit now, in one small routine reached with RCAL. That is not decoration: what it hands back is the settled status in A, and CALL puts A back the way it found it, so an ordinary call cannot carry the one thing this exists to carry. Two bytes of Stack rather than ten, in a routine that runs on every block the machine ever touches - the first place in the system where the new call is the right one rather than merely a cheaper one. The manifest takes a @N after a disk, the way it already takes :ro, so a test can ask for a slow one. cosmosSlowDisk lists a directory at two thousand cycles a block and gets the same listing as everything else, which is the whole assertion: a filesystem that did not wait would print nonsense rather than fail. Zero is the default and every other test runs at it. What waiting costs, on a directory heavy run: 229k cycles at zero, 275k at five hundred, 415k at two thousand, 1.16M at ten thousand. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
e0cf0a9a25 |
Charge the memory controller for the memory it moves
A blit cost ten cycles, which were the five port writes that set it up. The quarter of a kilobyte that moved cost nothing, and no hardware moves a quarter of a kilobyte for nothing. BANKS ARE SEPARATE MEMORIES, AND THAT IS WHAT SETS THE RATE. A move between two of them can overlap its read and its write - fetch the next byte while the last one is stored - so it settles at a byte a cycle. A move within one bank cannot, and costs two. A fill has nothing to read and costs one whatever the banks are. The odd cycle on each is the pipeline filling. That is not a modelling choice so much as a reading of the structure the machine already has: a Program to Data blit is inherently twice the rate of a Data to Data one, and it is legible why. Measured: 256 bytes is 297 cycles across banks and 518 within one, both including the instructions that ask for it. WHAT IT TAUGHT, which was not what I expected. Charging for movement costs the native assembler 0.4 per cent and costs directory work 13.4. The assembler reads a block and then thinks about it for a long time, so the move is amortised into nothing; the filesystem reads a block in order to look at it and does nothing else in between. So the case for a blitter that runs alongside the CPU is weaker than it sounds. Concurrency pays when there is other work to do during the transfer, and the place that spends its time moving memory is exactly the place with nothing else to do - it blits a block precisely so that it can read it. What that workload wants is a FASTER controller, not a concurrent one: a wider data path halves the wait, and the machine is waiting either way. Video is the case that would still want concurrency, since a frame can be moved while the next one is worked out. That is an argument about software nobody has written yet, and it is now an argument with numbers on the other side of it. The byte at a time port is charged too, for the byte it moves beyond reaching the port. Nothing polls CTRL_STATUS, so the transfer stalls whoever asked for it, which is the conservative reading and the one the software already assumes. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
f1e5cc46f6 |
A cycle is an access to memory, not an instruction
cycleCount used to tick once per instruction, so RSTA cost what SETD cost and a CALL moving ten bytes of Stack cost what a branch cost. No machine anybody could build works that way, and the emulator's job is to be the thing the hardware is designed against. Every touch of memory now goes through one of four accessors that charge for it: fetching an opcode, fetching the bytes after it, reading or writing Data Memory, and reaching a device port. One access, one cycle, nothing overlapped. The accessors exist so the cost is counted where the access happens rather than in a table of per instruction costs kept somewhere else - a table like that is a second copy of what the code does, and the two drift. The run loop spends a budget of cycles instead of running a count of instructions, so the emulated rate means something: an instruction costs what it touches, and a batch ends when the cycles are gone. What the numbers say now: RSTA 1 and SETD 4, being one byte and four. LDA 3, DPUA 2. CALL and RET together 24, RCAL and RRET together 8, because the first pair moves twenty bytes of Stack and the second moves four. The average SplitBit instruction costs 3.72 of these, measured over the native assembler assembling a program. And the measurement that prompted all of this: converting the filesystem's hottest leaf routine to RCAL is 3.1 per cent cheaper on a directory heavy workload. The old model said 0.0, which is what a model that cannot see memory traffic must say about a change that is nothing else. Three tests moved. settle() strips the cycle count from recorded output, so nothing should have churned - but it was anchored to the start of a line and replCalculator's last output has no newline on it, which leaves the halt message mid line where the pattern never reached. Not anchored any more. The two Life programs are bounded by a cycle count because they never end, and that number was rescaled from 3,000,000 to 11,200,000 - the same amount of work at 3.72 cycles to the instruction. Nothing about either program changed. No limit reproduces the old output exactly, because the cut now lands elsewhere in a frame, so they are recorded again rather than tuned to match. Whether hardware overlaps a fetch with the end of the previous instruction is left open on purpose. This is the conservative model; pipelining is a decision to make while drawing the hardware, not one to inherit from an emulator. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
54f5cfe8a4 |
Add Copy and Compare, which stream in both directions at once
Copy joins the read and write streaming services: source and destination are both larger than Data Memory while the program owns one block. Compare reads two files through separate blocks and ignores the bytes past a short final block, which belong to neither file. Between them they exercise empty, exact-block, part-block and 84,000 byte files, and the host extracts the copy afterwards so that two native programs agreeing with each other is not the only oracle. Written by ChatGPT, as their headers record, along with the agree.sh section and the manifest entry that drive them. THIS SHOULD HAVE COME FIRST. The commit before it staged whole files rather than the hunks it meant, so its manifest already names these two programs while their source was still untracked - that commit will not build on its own. Left in place rather than rewritten, since the pair is right and only their order is wrong. NOTES.md is their review of the streaming work. The first item in it is fixed by the commit before this one; the rest are still open. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
a7d3e09d94 |
Refuse a streamed file that commits more than it reserved
osFileStart sets an extent aside and osFileWrite refuses a block index outside it, so writing off the end was already barred. Committing a larger size was not, and reaches the same neighbour by simply claiming it: a directory entry is the only record of what a file owns, so an entry claiming a block it was never given owns it, and so does whatever owned it before. Both files then look perfectly well formed. The free count went backwards past zero on the same path. Found by ChatGPT's review of the streaming work, in NOTES.md. I had bounded the index because writing off the end was the obvious way to reach a neighbour, and had not noticed that the other end of the same reservation was open. THE SIZE IS COMPARED, NOT THE ROOM IT TAKES UP. One block and a tail occupies exactly what two whole blocks occupy, so bounding the blocks alone would let a file reserve the first, commit the second, claim no block it was not given, and still report two hundred and forty six bytes that were never written to it - whatever the disk had there before. Checked before anything is touched, which is why the temporary is found twice. The old file is deleted a few lines down and a refusal after that point would have destroyed the thing it was protecting. AND IT CAUGHT A REAL ONE IMMEDIATELY. The assembler reserves the file plus room for its vectors, and asked for four bytes per vector DECLARED - which looks like a safe bound and is not, because a device is declared during the SECOND pass, in the line that implements it. A program with a device installs a vector that was not counted when the room was measured. CosmOS reserved 14,163 bytes and committed 14,167, writing four bytes past what it had been given on every build since S2. It landed inside the last block it owned, and would not have if the boundary had fallen four bytes earlier. It reserves against the vector table's LIMIT now, which cannot go stale whenever things are counted. Claim.asm is the program that tries it: reserve one block and a tail of ten, write them, then tell osFileDone the file came to two whole blocks. The refusal and the honest commit that follows are both recorded. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
19ab36a201 |
The assembler can say where everything ended up
-S writes every label and the address it was given, in address order. Nothing else knows that. A program on the disk is bytes; the monitor can disassemble it but has no idea what any of it is called. So counting which addresses a program calls says a great deal and names nothing - the answer arrives as a column of numbers and somebody works out by hand which routine each one is inside. It was deferred when the native assembler was planned, as a listing and symbol dump nobody needed yet. Finding out where the assembler spends its time is what needed it: the top six call targets were addresses until this existed and are numStep, numCompare, tokGet, srcNext, numAddByte and clsSameName with it. Sorted by address rather than by name, because the question asked of it is always "what is at this address". Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
af0360128b |
Sixty four instructions becomes seventy
The six settled back on the twenty fourth, built now. RCAL and RRET are a call that puts nothing back. CALL restores A, B and Data Pointers 0 through 2, which costs ten bytes of Stack and is why a subroutine here can only hand anything back through Q, DP3 or memory. RCAL costs two and restores nothing, which is what a short leaf routine wants and is unsafe in exactly the way the name says. They are a pair because the frames are different sizes: returning from one through the other walks the Stack to somewhere that was never a return address. That was the user's correction to the original proposal, which had a raw call and no raw return. DPUA and DPDA offset a Data Pointer by A; DPUW and DPDW by A and B together, most significant first. DPUP and DPDN take a byte written into the program, so moving a pointer by something just worked out meant storing it and loading it back. Down as well as up on symmetry grounds, which was also the user's call - the argument against it came from counting uses in a corpus written under the constraint. The opcodes sit where they belong: 0x16 and 0x1E immediately below CALL and RET, and 0x4E through 0x51 at the end of the Data Pointer family. All six fit shapes that already existed, so instructiontable.py needed only set membership and both machine side copies of the table regenerated from it unchanged. Checked at every level it exists at: the emulator runs them, the host assembler encodes them, the monitor disassembles all six with the right lengths, and the assembler that runs on the machine builds a program using them byte for byte identically to the host - and that program runs. The recorded test measures what the two calls COST as well as what they put back, because an RCAL that quietly did what CALL does would still return to the right place. It does not survive that: returned through RRET, it hangs. docs.sh can read a two word number now. The count of instructions taking a Data Pointer went past twenty, and the pattern only allowed one word, so the check would have reported that the manual had stopped saying it rather than that the number was wrong. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
00d896e3e7 |
Break shows registers it chose, not ones it inherited
Break left DP1 and DP2 alone, so what a stop printed for them was whatever the shell happened to have left there - which is a CosmOS address, which moves whenever CosmOS is touched at all. The recorded output had to be taken again four times in one day's work, every time for a value that is not this program's and that nothing should ever depend on. It sets all three of the pointers it owns now, rotated between the two stops so that every one of them visibly changes, the way A and B already did. DP3 stays as the system left it: it is where the program was entered, which is the one thing worth seeing here that this program did not choose, and it is steady because it is this program's own base. A demonstration of what the registers were should show registers somebody chose. Then every line of the record is being asserted rather than merely observed, and a reader can tell which is which. Checked both ways: sixty four bytes added to CosmOS's data no longer moves it, and reading the frame at the wrong offset still fails it. cosmosRun and cosmosMonitor move because Break is sixteen bytes longer and both of them list the disk it sits on. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
fb7b224bbb |
S2: the assembler writes the file as it makes it
The output image is gone. It was eighteen kilobytes and it is now one block of window, because the file was always produced in order and only ever needed to be written that way. Everything works in FILE OFFSETS now. A cursor is a two byte number counting from the front of the file, and since a block is two hundred and fifty six bytes, the block it lands in is the offset's high byte and the place within that block is its low one - so there is no division anywhere, and ImgWalk, ProgPut and DataPut needed no change but where they start. ONE WINDOW RATHER THAN THREE. The plan said three: one per segment, and a third for the block where the program ends and the data begins, which belongs to both. Fetching a block back instead makes all of that one case. The header is patched after every byte is out, the boundary block is written by both cursors, and both are simply revisits - a revisit is what fetching handles. osFileFetch is the service that allows it, and is the read side of the write. A run of bytes in one segment costs nothing extra; a switch between segments costs two block operations, and a source file has a few dozen switches and several thousand bytes. Two bugs, both a pointer meaning two things: putAt took the cursor to advance in DP2 and then wanted DP2 for the window's address. A call puts DP2 back the way it was AT THE CALL, so the step at the end moved whatever the last call had left there - the window walked off across memory while the cursor stood still. It goes in memory now, like the block did in S1, and for the same reason. The size the file is created at could not be right. How many vectors are actually installed is not known until the second pass has resolved their handlers, and by then the file must already exist to be written into - so Keys, which brings one vector, came out four bytes short. Teaching the first pass to count them meant teaching it about devices, and about a Boot line in a loadable program not being installed at all, which is two ways to disagree with the second pass about what a file contains. So osFileDone is told the size instead. A writer asks for as much as the file could possibly come to - the whole of it plus four bytes for every vector DECLARED, which no file can exceed - and says what it really came to at the end. The blocks it did not use go back to the free count. Asking for too much costs a moment; asking for too little writes off the end of a file. That is a better service for it, not a workaround. A writer that cannot know its size until the last byte is the ordinary case, and it is exactly the case this whole rung exists for. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
9f7dffdeca |
S1: the write side learns to stream
osFileStart, osFileWrite and osFileDone are the mirror of osFileInfo and osFileBlock. A program can now write a file it never holds: Pour writes twelve blocks and a tail while keeping 256 bytes of it at a time, and the host tool reads all 3,112 bytes back with every block where it was put. ONE WRITE IS OPEN AT A TIME AND COSMOS HOLDS IT. Reading needs no state - a name and an index are the whole question - but writing safely does, because the new file has to exist before the old one is thrown away and something has to remember which temporary belongs to which name. Keeping that here means the careful order is written once instead of in every program that streams. Nothing already on the disk is touched until osFileDone, so a disk without room says so while the old file is still there. That is stronger than osFileSave can manage, where the size is only known once the caller has every byte in hand. osFileSave stays: Edit and Files hand over whole documents and have no reason to learn any of this. osFileWrite refuses an index past the end of the file, and that refusal is not politeness. Files are contiguous, so block nine of a three block file is a real block belonging to something else, and writing it would put one file's bytes inside another with nothing anywhere saying so. Checked both ways: the tail block is allowed and the one past it is not. Three bugs, all of them the same shape - a register or pointer used for two things at once: DP3 carried the block count in and was popped high byte first, which is the wrong way round from every reader in the system and made the count two hundred and fifty six times too big. sbfsStreamStart took the name in DP0 and then wanted DP0 for something else before it had read it, so it walked whatever it last pointed at and reported that it could find no room. sbfsStreamWrite kept the caller's block in DP3 across a find - DP3 being the pointer a return does not put back, which is exactly why the find uses it too. What went to the disk was whatever the scan last looked at. It goes in memory now, and the file is correct because every block says which block it is; a check on the length alone would have passed all three of these. Writing no longer finds the file for each block either. Nothing moves a file once it is made, so where it starts is settled when the temporary is created. That was not even slow - a scan stops the moment it matches - but it was a walk of the directory per block for an answer that cannot change, and it is 28 per cent of the cost of writing forty blocks. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
7cd5e34347 |
Two ceilings a hundred bytes apart look like one ceiling
The sixteen kilobytes taken back a moment ago all went to the output image, because that was the wall: 13,245 bytes of cosmos.bin against 13,312. Lifting it moved the machine straight into the next one, a hundred and eleven bytes away - the label names, at 8,081 of 8,192 - and the index was a hundred and eighteen entries from the same place. So the room is shared out rather than given to the obvious one. Names and index both double, and the output takes what is left, which is still four and a half thousand bytes more than CosmOS needs. LabLimit and LabRoom in labels.asm have to agree with the map in scratch.asm and are now said to. Worth recording how this was found, because it is the good case. The assembler STOPPED and said "no room left for label names: Mode, at line 3598" - a limit it checks, names, and points at. Every other ceiling this project has hit went unnoticed until something downstream broke: a program loaded over the shell, a path silently cut short, a file reported as itself less 65,536. A limit that announces itself is worth the handful of instructions it costs. The output's eighteen kilobytes are temporary. They exist because the assembler holds a whole finished file in memory before writing it, and the file is produced in order, so it could be written as it is made. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
ec56439d9a |
Take back the sixteen kilobytes the scratch map left behind
The assembler's buffers start at 0x8000, and the reason written beside them is that everything above its own data is free. That was true when it was written. The system kept below 0x1000 then; its data now reaches 0x1FFF, and the assembler's own moved from 0x1000 to 0x2000 with it when both halves of the memory map were doubled. The floor came up and the map stayed where it was, leaving sixteen kilobytes between the two that nothing touched at all. Starting at 0x4000 takes that back, with nearly four kilobytes of slack still in front of it and room for the assembler's own data to double before the two would meet. All of it went to the output image, because that is the buffer that is actually full. cosmos.bin is 13,245 bytes against the 13,312 it had, which is sixty seven bytes - the next thing added to the system would have made the machine unable to build it, and it would have shown up as a test going red rather than as anything explicable at the machine. The label table has room yet, so this is not the moment to share the space out evenly. This is the third time a limit here has gone unnoticed until something hit it, and the second where the cause was a number that stopped being true rather than one that was ever wrong. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
06bdbf7728 |
D5: move in, and give the assembler somewhere to look
The demo disk is three directories instead of thirty nine names in one list with cosmos.asm sitting between fileStream.asm and sbfs.asm: /Apps what you run /Source what you name to the assembler /Lib what those include The split is by ROLE rather than by which directory the host keeps a file in. Everything in /Lib is named by an #Include somewhere and by nothing else, which is what makes it a library rather than a source. THAT LAYOUT WAS NOT POSSIBLE UNTIL NOW, and finding out why is what this rung actually cost. An include on the machine was a bare name resolved where you stood, so every source that calls a service had to sit in the same directory as services.asm - which is every source worth having. The first arrangement of this disk put the examples in a directory of their own and none of them would assemble. So the native assembler has a search path: beside you, then /Lib. The same rule the shell already uses for a program it does not recognise, applied to the thing that reads source, and the same reasoning for it being two fixed places rather than a list - a list needs somewhere to live between one boot and the next, and there is no such place yet. It also brings the native assembler nearer the host one, which has searched -I directories since before there was a machine to run this on. The reader's per-file state grew from 293 bytes to 301, because the name it keeps is a path now and every block of a file is asked for by it. Six of those would no longer fit the room set aside, so the include list moved up a page. Both numbers are written down in two places on purpose and both were changed. dir said cosmos.asm was 17,460 bytes. It is 82,996. The size came out of the block count's LOW BYTE shifted up and the tail beneath it, which is sixteen bits, so anything from 256 blocks upward came back as itself less 65,536 - a plausible number, and wrong. Files that big say their size in blocks now. Printing the true figure wants decimal printing twenty four bits wide, which is a page of console.asm to say something nobody reads more precisely than "big". The Assembler Manual's line about SBFS being flat was the last thing in the repository still claiming it, and docs.sh now looks for that phrase and three like it in all four documents. Not a section that is wrong - one clause inside a paragraph that is otherwise right, which is the shape this kind of staleness takes. The duplicate puts are gone with the wildcard that caused them, so building the disk is quiet. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
da91a36d92 |
D4: the machine makes directories too
mkdir and rmdir are the machine's own now, and a file goes where its path says rather than always in the root. A disk can be organised without the host tool touching it. Everything below the surface works in terms of a directory and a name rather than a path. sbfsWalkParent splits the last name off, walks the rest, and hands back the two - and the separator stays on the end of the head, which is what makes one rule cover every kind of path: "/x" leaves "/", which is the root; "x" leaves nothing, which is where the machine already is; and "A/x" leaves "A/", which is neither and needs no special case to say so. Saving works in those two as well, and had to. The careful order a save uses - make a temporary, write it, delete the original, rename the temporary - only works if the temporary is made in the SAME directory as the file, because the rename at the end changes a name and does not move anything. Renaming to a path naming a different directory is refused for that reason, rather than quietly being a lie the disk goes along with. Three things this cost, all found by running it: mkdir Apps/Deep made /Apps/Apps. The leaf was worked out into SbfsWanted and then the head was walked - and walking goes through sbfsPathNext, which puts every name it meets into SbfsWanted on the way past. The head's last name landed exactly where the leaf was. It has somewhere of its own now. rmdir took a directory with something still in it, which is the one failure the whole design is arranged to prevent. Looking for children clobbered DP2 and rebuilt it from the buffer and the entry count with the subtraction the wrong way round, so the pointer walked off the end of the block and found nothing. The comparison goes through a CALL now, like the two beside it, and DP2 comes back on the entry because a RET puts it there. SplitDisk's "in use but not reachable from the root" line is what caught it. Refusing a name longer than twenty two used to read the twenty third character of a shorter one, which is somebody else's string. It is measured now. Tests/agree.sh is new and is the gate this rung was for: the same disk built twice, once with SplitDisk and once with CosmOS, compared byte for byte. The two share no code and only a written specification, and every field one writes and the other only reads is checked there and nowhere else - which entry a thing lands in, which block, what a directory's unused fields hold, the version, the free count. It caught a wrong parent immediately when that was broken on purpose. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
36ce9f6ccf |
D3: the machine knows where it is
cd moves it, dir lists the directory it is in, and the prompt says which one - but only when that is not the root, so a machine nobody has moved about on looks exactly as it always did and every recorded test that never says "cd" keeps its recorded prompt. A path beginning with a separator is measured from the root and anything else from where the machine is, so a bare name means a file in the current directory. NO PROGRAM HAD TO BE TOLD: the working directory lives in sbfs.asm beside the thing that resolves paths, because it is what a relative path MEANS. Keeping it in the shell would have meant either handing it down on every call or pasting it onto the front of every name, and the second of those is how a name that is already absolute gets ruined. Nothing stores the path. The working directory is an entry index and two bytes, and the text on the prompt is built each time by walking the chain of parents upward, writing names from the end of a buffer towards the front - which is the order they arrive in, and saves reversing them afterwards. sbfsFind splits into a walk and a check. "cd /" and "cd .." both end at the root quite legitimately, and had no way to say so through a routine whose only word for the root was "missing". Typing a program's name now tries two places in order: where you are, then /Apps. The first makes a program you are working on the one that runs; the second lets Snake work from anywhere. A word already beginning with a separator has said where to look, so only that place is tried. osChangeDir exists so that "a program may move about, and the shell puts the working directory back" is a thing that can happen rather than a promise about nothing. Both halves of that were unfalsifiable without it: with no way for a program to move, removing the restore changed no test. Wander is the program that moves - it goes where it is told and reads a file there by a bare name - and with it on the disk, removing the restore fails. The remembered file is dropped whenever what a relative path means changes: a cd, a program calling osChangeDir, a program exiting. Removing all of them fails the test and removing any one of them does not, because today every path into that cache belongs to a program that exits. It is kept in all three because the cost is a call and the failure is a file's blocks being handed out under another file's name. The cwd fixture holds two files called notes.txt saying different things, and a Say.sbx in /A that is really hello. Two copies of one program, or two copies of one file, would have passed with the whole of this deleted. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
588e02aff5 |
Double CosmOS's half of the machine, and check that it fits
The memory map gave CosmOS 0x0000 through 0x1FFF of Program Memory and applications 0x2000 and above. CosmOS is 8141 bytes at the previous commit, which is fifty one bytes short of the line, and the next thing added to it went over. GOING OVER DOES NOT FAIL WHERE IT HAPPENS. Nothing enforces the division: an application says where it goes with #Base and the loader puts it there, so a CosmOS that has grown past 0x1FFF simply has the next program loaded written over the end of it. What breaks is whichever part of the shell that program happened to cover, at whatever later moment somebody uses it. It turned up here as the monitor's assemble command answering "I do not know" to valid instructions, several commands into a session, on a machine that had booted perfectly well. Both halves are doubled: applications now start at 0x4000 in Program Memory and 0x2000 in Data Memory. That is 16K of code and 8K of data for the system, against the 8775 and 2948 it uses today. Both were on the same trajectory, and moving them together means the twenty files that say #Base are edited once rather than twice. The standalone loader's loadable.asm keeps its old base: it belongs to the loader CosmOS grew out of, not to CosmOS, and its addresses answer to a different program. The unbased-segment diagnostic keeps its old base too - it exists to produce an error message that names the address, and the message is what is recorded. Tests/docs.sh now reads the two limits out of the table in the README and measures both segments against them. It reads them rather than being told them because the table is the specification, and this is the second time in this project that the thing nobody checked is the thing that rotted. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
36a1b07b5b |
D2: the machine walks a path
sbfsFind takes a path where it used to take a name: names with '/' between them, walked from the root, with '.' and '..'. Each name is looked for among the entries whose parent is where the walk has got to. A bare name is a path of one name, so everything written before directories existed still works and still costs one walk of the directory. sbfsMount takes either version. On a version one disk every entry has zeroes where a parent goes and the walk starts at zero, so the comparison always agrees - which is how a flat disk reads correctly here with nothing done to it. PROGRAMS DID NOT HAVE TO BE TAUGHT ANY OF THIS. Resolution sits inside sbfsFind, below the services, so every osFile call keeps its signature and a path is simply a longer name. Type, More, Edit and the assembler gained subdirectories without a line changing in any of them. Four things this turned up, none of which was the path walk: load copied the path into a buffer sized for a NAME, so anything over 22 characters was cut short - and cut short into a path that often still resolved. "/Apps/Deep/../../Apps/Say.sbx" became "/Apps/Deep/../../Apps/" and reported that the program was a directory. That is the whole of what looked like a bug in '..', and it cost most of the time here. load on a directory SUCCEEDED. A directory has no blocks, so reading it reads nothing and leaves the staging area holding whatever was staged last - which, if that was a program, still says SBEX and still has a working entry address. It handed back the program before it. Refused outright now. delete and rename on a directory are refused, and save refuses one up front rather than failing at the rename and leaving a temporary behind. Deleting a directory frees an entry index, and a parent IS an index, so the next file created would take it and inherit the children. create writes the parent rather than leaving it zero by luck. It would be zero - delete wipes all thirty two bytes and a fresh entry never had any - but that is a fact about two other routines, and a file appearing inside a directory it was never put in is not a failure anybody would think to look for. dir marks directories and counts them apart from files, because at this point it was calling them files of no bytes. Two hazards written down in the design note turned out not to be real, and both were checked rather than argued about: The lookup cache holding 22 bytes of a longer path cannot hand back the wrong file - textSame wants both strings to end in the same place, so a cut down entry misses. It can never HIT either, though, so every path longer than a name went to the disk every time; it holds a whole path now. The allocator stepping over directories changes nothing any test can see. A directory has no start as well as no blocks, so its bounds are nought to nought and no candidate begins before it ends. The four instructions stay, with a comment saying they are not load bearing today and why they are there anyway. makedisks.sh resolves its build path before it cds. Given a relative one it carried on and quietly built disks missing some of their files, which is how the tree fixture lost a file and sent me looking for a bug in '..'. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
78e9eef472 |
D1: teach SplitDisk directories, without moving a byte
SBFS version two adds directories out of space each entry had already set aside: two of the four reserved bytes become a parent, and one of the seven spare flag bits says an entry is a directory. The entry is still thirty two bytes, so it still divides two hundred and fifty six and still never straddles a block, and nothing in the block layer knows anything happened. A directory is an entry with no blocks. That is what keeps the flat array of entries the whole allocation map, which is the property the format is built on: with files laid down contiguously, every block is inside some entry's range or it is not, and an entry with no range is in nobody's way. There is still no allocation table to consult and none to keep right. THE PARENT IS AN INDEX PLUS ONE, so zero means the root. A version one disk has zeroes in those bytes, and "in the root" is exactly where every file on a flat disk is - so a version one image is already a valid version two image, with nothing to convert and no tool to convert it with. A disk is at the lowest version that describes what is on it. format makes a version one disk and mkdir is what raises it, so everything built here stays readable by a reader that has never heard of a directory right up until it really does have one. That is what lets this land before the machine knows anything: the whole existing suite passes untouched. The tool gains mkdir and rmdir, and list, put, get and delete take paths. list also now reports entries used against entries available, because a disk has two ceilings and the entry one is the one nobody notices until it bites. rmdir refuses a directory with anything in it, and that is not politeness: parents are entry indices, a freed index gets handed out again, and the children of a removed directory would reappear inside whatever took its place. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
f4fb56606e |
Give the demo disk room for names, not just for bytes
The demo disk had eight directory blocks, which is sixty four names, and thirty nine of them were already spoken for. Its two ceilings were nowhere near each other: the average file on it is twenty six blocks, so sixty four names run out with the disk forty one per cent full. Names were going to be gone long before space was, and space is what a disk is usually short of. Twenty four blocks is one hundred and ninety two names. The difference costs sixteen blocks of four thousand and ninety six, three tenths of one per cent, and the superblock has carried this number per disk since the format was written - so nothing but the makefile line knows or cares what it is. This is provisioning and not format. Directories, when they arrive, will not relieve this pressure; under the settled design they add to it, because a directory spends an entry of its own. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
2b0aeeefd4 |
Start a program by typing its name
A word the shell has no command for is now looked for on the disk as "<name>.sbx", and if it is there it is loaded and started exactly as load and run would do it. Whatever followed the word reaches the program through osArgument by the same route as whatever follows run, so "Say hello there" and "Type notes.txt" work without either program knowing how it was started. load and run are unchanged and both stay. load is how the monitor puts an arbitrary file in front of itself, which typing a name deliberately cannot do: the extension is added rather than assumed, so "notes.txt" looks for notes.txt.sbx and a text file is unreachable by name whatever is inside it. Three things this had to get right: The built-ins are tried first and always win. The search hangs off the end of the dispatch chain, so a file called dir.sbx cannot become dir, and the commands worth trusting when the disk is what you are doubting stay trustworthy. The invoke disk carries a working dir.sbx so that this is checked rather than asserted. A file that is found but is broken says so. "not a program" and "I do not know" are different answers, and giving the second about a file sitting on the disk would send somebody looking in the wrong place. loadProgram therefore hands back a status as well as a message, since only "no file of that name" can fairly be reported as anything other than a fault. doLoad became that subroutine rather than being copied. It ends in RET instead of a jump to the prompt, and each way of failing sets its number and its text together so a new one cannot leave half of the answer behind. cosmosBreak moves because Break prints the pointers it was handed and those are the shell's leftovers, which a CALL now puts back. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
dbe58db660 |
Add Type and More, and the file stream they are built on
Two applications that read a file too big for Data Memory: Type prints one, More pages it. Both sit on fileStream.asm, which wraps osFileInfo and osFileBlock into open-and-next so an application walks a file's blocks without repeating the service calls. The disk fixture is deliberately awkward: readable.txt crosses several blocks and carries no zero byte to be mistaken for an end marker, and empty.txt says that zero blocks is a valid file rather than an error. These three files were written by ChatGPT, as their headers record. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
4fd8bf7b3f |
Step a Data Pointer with INCD and DECD, not DPUP and DPDN by one
DPUP takes an immediate, so an offset of one is legal and does exactly the right thing. It is also three bytes where INCD is two, and reads as "offset the pointer up by one" where INCD reads as "step the pointer". 56 of them across 15 files: the system, the assembler, the editor, and eight test programs. CosmOS is 9,564 bytes to 9,537, the native assembler 11,648 to 11,635, and every program in the repository together 49 bytes lighter. The worst offender was numbers.asm, written this week, where every sixteen bit helper reaches the low byte and comes back the long way round. It is the file every other part of the assembler includes, so it is the first thing anybody reads when they go looking - and it was teaching them the long way. Pattern matched off sbfs.asm rather than off the instruction table I had just embedded in two programs. THIS IS NOT TWO WAYS TO DO ONE THING. DPUP takes an arbitrary number, so one is inevitably among them; INCD earns its place by making the common case a byte cheaper. The overlap is structural and the choice is a usage question, which is a linter's job rather than an ISA's - "DPUP.n 0d01: INCD.n does this in a byte less" is a mechanical rule with no judgement in it. Nothing needed re-recording, which was not a foregone conclusion: cosmosBreak prints the system addresses the registers happened to hold, and they did not move. Both assemblers still produce identical bytes and CosmOS still builds itself to a fixed point. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
Anachronaut
|
12cb489268 | Minor typo fix to assembler manual. | ||
|
AnachronautandClaude Opus 5
|
bd94059c08 |
Put the screenshot at the top of the README
The picture does what three paragraphs of prose were doing, and does it first. It has the whole loop in one frame: Asm.sbx assembles hello.asm into hello.sbx, the shell loads that and runs it, and then the monitor disassembles what is at 0x2000 - which is the program the machine wrote for itself at the top of the same screen. The caption points at that last part, because it is the thing an eye slides past. The disassembly is not of an example; it is of the output. Two notes on getting it right rather than nearly right. The file is Media/CosmOS.png and not the cosmos-screenshot.png it was described as, so the link would have been dead on arrival - checked by looking rather than by typing what I was told. And the caption first said the disassembled program was written "six lines earlier", which was wrong by about four; it now says "at the top of the screen", which cannot drift. docs.sh already covers it: the link check treats an image like any other relative link, and moving the file out makes the suite say so. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
9690ecf21f |
make sanitize runs the whole suite, not half of it
It built all three tools with the sanitizers and then ran run.sh and terminal.sh only. So SplitDisk was compiled sanitized and never once exercised, and native.sh - which drives the assembler and the emulator harder than anything else here, through two self-hosting builds and a fixed point - was skipped entirely. Those are precisely the places worth watching: block and tail arithmetic on disk images, and buffer indexing in two assemblers, one of which was written this week. disk.sh, native.sh and docs.sh now run under the sanitizers with the rest. Timed first rather than guessed at: 0.41s, 6.05s and 0.14s, against a whole sanitize run of 33 seconds. All three pass, which is worth knowing given none of them had ever been run this way. The README said sanitize ran "the suite", which was generous. Now it does. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
8ace20629b |
Say what the tests need, and count the tools correctly
Two nitpicks from review, and one of them was only half right, which is why each was checked rather than swept. THE TEST DEPENDENCIES were nowhere. The README said what building needs and stopped, so somebody with a C compiler and nothing else would get through 'make' and fall over on 'make test'. It needs bash and Python 3 - two of the checking scripts are Python, and one of those opens a pseudo-terminal - plus stty, timeout and the usual text utilities. "BOTH TOOLS" WAS WRONG IN TWO PLACES OUT OF SIX. 'make sanitize' builds the default target, which is all three, so the README and the makefile both undercounted what they rebuild. The other four are right and were left alone. assembly.h says both tools have to agree where the vector table begins, and bootstrap.c and cpu.c say they share the boot image format and the vector layout - in all three cases that is the emulator and the assembler, and SplitDisk has no opinion about any of it. The makefile's POSIX comment is the same story: SplitDisk uses not one POSIX interface, so it names the two that do rather than counting to three. Media/ is a home for the screenshot that is coming, with a note saying what belongs in it and that docs.sh will catch a link to something removed from it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
4e5710a1e6 |
Make the README's references clickable, and check that they land
The two manuals and the CosmOS README were named in prose and nothing else, so reading about them and getting to them were separate acts. They are links now, along with every directory in the repository map, which is the other place somebody reading that page wants to click. THE MANUALS HAVE SPACES IN THEIR NAMES, so the links carry %20. That detail is why this is checked rather than eyeballed: a link with a raw space in it points at a file that exists, so nothing about the filesystem is wrong - the renderer just stops at the space and the link goes nowhere useful. Tests/docs.sh now walks every relative link in every tracked markdown file and complains about both failures: a target that is not there, and a target with a space that should have been encoded. Both verified by breaking them. The first attempt at that verification was itself wrong - I removed the %20 and the check passed, because the file really does exist under that name. That is what showed the two failures are different things and both need catching. 13 links, all landing. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
3f95056eec |
Three papercuts a visitor would hit first
Found by a review, all three confirmed by trying them rather than by reading. 1. THE STRICT BUILD CLAIM WAS FALSE. The README says the sources build clean under -std=c11 -pedantic with -Wall -Wextra, and they did not: realpath is an XSI interface, and _POSIX_C_SOURCE=200809L does not reach it, so the assembler would not compile. The ordinary -Os build never saw it, because without -std=c11 the compiler's own default declares realpath anyway. _XOPEN_SOURCE=700 is POSIX.1-2008 plus XSI, and covers every file on its own. Narrowed by compiling each source with each candidate macro rather than by adding one and hoping. And 'make strict' now checks it, as part of 'make test'. The README makes a claim somebody may check by typing it, so the suite types it. Verified the check bites by putting the old macro back. 2. THE COSMOS README HAD NOT CAUGHT UP WITH THIS WEEK. It said there were no breakpoints and proposed writing a spare byte over an instruction - two commits after SWI osBreak was built, which does it without overwriting anything and is described correctly further down the same file. Its Current Scope said there was no native assembler and that self-hosting was the intended long-term milestone. And the streaming section spoke of a machine "one day going to assemble itself". All three now say what is true. Self-hosting is described as done, with what is left of it named: a linker, and an editor that knows what assembly is. 3. 'make run-hello' DID NOT WORK, and it is the one command the makefile's own header advertises. It was a pattern rule against $(BUILD)/%.bin, which worked while every program sat at the top of Programs/ and broke the moment they were filed into Examples/ - which I did, four commits ago, without trying it. The name is looked up among the programs now, so it is the program's name rather than its path, and an unknown one lists what there is instead of saying "No rule to make target". The same sweep was run across all four documents for other claims this week invalidated. The remaining "not yet" phrases are about faults that genuinely are not defined yet. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
7e8639489b |
Take the direction out of the last cross references
Includes two edits of Anachronaut's: dropping a "See the Assembler Manual" from text that is now IN the Assembler Manual, and tightening a sentence about when a vector number has to be agreed. The first of those was mine to have caught. Moving "Loading A Program From A Disk" into that manual turned a cross reference into a document telling you to go and read itself. I checked for dangling references before the move and found none, because I checked for references by SECTION NAME and not for references to the manuals themselves. Checked properly now, both directions: no other document refers to itself, and nothing that moved says "above" or "below" about something that ended up in a different file. The three remaining directional references are gone with them - two that were correct today and one, "See Numbers You Write Down below", pointing at a section twenty four lines further down that nothing guaranteed would stay there. A reference that carries a direction is a reference that goes wrong the next time anything moves, and this week moved a great deal. There are none left anywhere in the repository. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
f4bc587d0a |
The C assembler names its output for the format, not always .bin
It always wrote .bin, whatever it had built. So assembling a loadable
program without -o produced Say.bin containing SBEX - a boot image name on a
file the machine cannot boot, in a repository whose whole convention is that
a .bin is started from and a .sbx is loaded.
Successfully wrote SplitBit boot image to "hello.bin".
Successfully wrote SplitBit loadable program to "Say.sbx".
programIsLoadable() already existed and is already what decides which
writer runs; the name now asks it too. Nothing in the build depended on the
old behaviour, because everything that assembles anything passes -o.
THE ASSEMBLER THAT RUNS ON SPLITBIT ALREADY DID IT THIS WAY. Two assemblers
naming their output differently from the same source is exactly the kind of
difference that wastes an afternoon, and the newer one was right.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
b6004bdcde |
Say "boot image" where that is what is meant
"Binary" was doing three jobs. It meant an SPBT file that the machine starts from; it meant whatever the assembler happened to produce, which is now either that or a loadable program; and it meant a compiled host tool. A word that means three things means none of them, and the first of the three has a name already - this project has been calling them boot images for a while and the manuals had not caught up. Where it means an SPBT file -> boot image Where it means either output -> output Where it means a host executable -> left alone Where it means base two -> left alone The user facing messages move with it: Error: No boot image specified. Usage: ./SplitBit [OPTIONS] <boot image> Error: This is not a SplitBit boot image. Error: This boot image is in format version 2, and this emulator reads 1. Successfully wrote SplitBit boot image to "hello.bin". The assembler's own help was the interesting case. Its -o writes either format, so "the binary" there was never right - it is "the output" now, and the message that names the format is the one that says which it wrote. No recorded output contained the word, so nothing needed re-blessing. Checked before starting rather than after. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
306b4dce92 |
Give the Programming Manual a title, and send the boot image format away
Last of the four. What was left after the reorder was a document whose first heading was "General Description" doing a part title's job without being one, and a section called "Input and Output In the Emulator" that held two console ports, a worked program, and a file format. A title and an opening that says what this document is FOR, and what the other two are for, so a reader who wants the operating system or the language knows immediately they are in the wrong file. "General Description" is "The Machine", which matches the three part headings the reorder gave the rest. "Input and Output In the Emulator" is "Making It Print Something", which is what the section is: port 0, and the shortest program that uses it. THE BOOT IMAGE FORMAT MOVES TO THE ASSEMBLER MANUAL, beside the loadable program format, for the reason SBEX went there: it is a thing the assembler WRITES. It is fair that the emulator reads them too - both tools speak it, the way SplitDisk and sbfs.asm both speak the filesystem - but only one of them makes one. And it is called a boot image now, in the text as well as the heading. That is what this project has been calling these files for a while; the manual was still saying "binary", which now means either kind of output file and so means neither. A CHECK THAT GOT BETTER BY BEING SPLIT. The hello world program and the hex dump of it were both in the Programming Manual, and docs.sh compared them with each other and with the assembler. The program stays with the machine, where the reorder put it just after the instruction list; the dump goes with the format it demonstrates. So the check now settles THREE things against each other: what one manual prints, what the other prints, and what the assembler actually makes. Verified both ways - a wrong byte in the dump, and the anchor renamed. The manual is 692 lines and four parts. It was 1,116 lines and nineteen flat sections when this started. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
e594f44cce |
Reorder the Programming Manual so it can be read from the front
The order was the order things were written in. A newcomer read the register
list and the very next heading was the vector table - an interrupt
mechanism, before a single instruction had been shown. The list of
instructions was section eighteen of nineteen, and how to make the machine
print something was dead last.
Four parts now, and each answers a question the one before it raises:
General Description the registers, the memories, the flags
Naming a Data Pointer
List of Instructions was 18th, and nothing before it could be read
without it
Making It Do Something
Input and Output was 19th and last. It carries the hello world
program, which now arrives on the heels of the
instruction list rather than after everything
The Console
The Stack Pointer, Set By Hand
When Something Else Wants Attention
Interrupts the mechanism before the table, which was the
The Vector Table other way round and made no sense that way
Hardware Interrupts
Faults
Refusing
What A Machine Is Made Of
Devices
Asking What Is There
The Memory Controller
Storage
Nothing is rewritten. Every section is the text it was, in a different
place, so the diff is a move and can be read as one.
CROSS REFERENCES NO LONGER SAY WHICH WAY TO LOOK. "See The Console below"
was true until this commit and false after it, and three of them flipped at
once. The name is enough to find a section with, and a reference that
carries a direction is a reference that goes wrong the next time anything
moves. There will be a next time.
Left for the last commit of the four: "General Description" is doing the
work of a part title without being one, and "Input and Output In the
Emulator" now holds a worked example and a file format as well as two
ports, so it wants a better name or a split.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
fa3982dbd9 |
Move the CosmOS third of the Programming Manual to CosmOS
386 of the manual's 1,116 lines documented an operating system rather than a machine. The split inside that file was never tutorial against reference; it was the machine against the software that happens to run on it. What A Program May Ask The System For 129 -> CosmOS README Programs That Come With The System 111 -> CosmOS README Reading And Writing The Filesystem 64 -> CosmOS README Loading A Program From A Disk 52 -> Assembler Manual The Console Library 25 -> CosmOS README The services are the clearest case: a hundred and thirty lines describing what CosmOS offers a program, in the manual for a CPU that has no operating system of its own. A different system on the same machine would offer different services and that section would be wrong for it. The loadable program format goes to the Assembler Manual instead, because SBEX is a thing the assembler WRITES. Nothing in the CPU knows what it is. The Programming Manual is 716 lines and fourteen sections now, all of them about the machine. TWO DUPLICATE DESCRIPTIONS COLLAPSED INTO ONE EACH. The application list existed in both documents in different words, and the CosmOS copy had gone stale - no Break, no Stream, no assembler - because only the manual's copy was checked. Moving the checked one in and deleting the other leaves one list, and docs.sh follows it. The second was made by this commit and caught while reading the seams: the CosmOS README already had a service table, so the move briefly produced two. That section now says what services are for and points at the one table. Renaming a section as it moved: "Reading And Writing The Filesystem" is "The Filesystem Library", which says what it is and reads beside "The Console Library". docs.sh follows all five, and each was verified by renaming the heading in its new home and reading the complaint. The README and the CosmOS README both described what the other manuals cover, and both were wrong the moment this landed; they say the division out loud now, since it is the point. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
460a687939 |
Make the manuals plain ASCII, and check that they stay that way
"All files must be plain ASCII, the user's tooling doesn't support Unicode" is a standing rule of this repository. Nothing enforced it, so it drifted: 39 em dashes and an ellipsis had collected in the two manuals, every one of them typed by something that helpfully substituted a nicer character. The spaced em dash becomes a spaced hyphen, which is what the source comments and both READMEs use for the same job. Tests/docs.sh now checks every tracked file and says which line and which character. Verified that it bites. THE CHECK READS git ls-files NUL SEPARATED, and that is the whole reason this went unnoticed. I ran the obvious shell version of this audit two commits ago - a loop over $(git ls-files) - and reported the repository clean. It splits on whitespace, so it looked for a file called "SplitBit", failed into /dev/null, and found nothing wrong with either manual because it never opened them. Both have spaces in their names. A check that cannot see the files with spaces in their names is worse than no check at all, because it answers. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
b2945e41c4 |
docs.sh: say which heading went missing, rather than raising IndexError
The manual checks find what they examine by splitting the file on an exact heading. Ten of the eleven anchors already say what they could not find - "the Programming Manual has lost its Devices table" and so on. Two did not: the worked hello world program and the hex dump beside it were reached with pm.split(anchor)[1] and nothing else, so renaming either produced a Python traceback and an IndexError. A traceback is a worse answer than a stale manual. It says a check broke without saying which heading moved, and it stops the rest of the run, so whatever else was wrong stays unreported. Both anchors are now tested before they are used, and both say which one is missing and what that means. Verified by renaming each and reading the message. This is the first of four commits restructuring the Programming Manual, and it comes first on purpose: the next three move headings around, and they should be watched by checks that would notice. IT ALSO CORRECTS THE PLAN. I had written that renaming a heading fails silently, and set out to fix all eleven. Probing them one at a time showed that was wrong - ten were already fine, and the job was one check rather than the whole file. The claim was worth testing before acting on it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
518be9cb17 |
Rewrite the README around what the system is now
It had become a geological record. The overview was the 2024 one - "load and run binary programs created for SplitBit interactively from the command line" - and the feature list had grown by accretion, so it opened with Debug Mode, CLI Based and Modular Codebase and buried self-hosting at bullet fourteen of seventeen. Three sections were called "Usage". Now it opens with what the machine is and the one fact that makes it worth looking at, with the transcript underneath. The features are grouped into the machine and the software running on it, and the bullets that said nothing are gone: "Binary File Support" and "CLI Based" describe every emulator ever written. The three tools have names in their headings rather than three identical "Usage" ones, and their options are tables rather than bullet lists. There is a map of the repository, which there was not before and which the last two commits made worth having. TWO THINGS IT WAS SAYING THAT WERE NO LONGER TRUE, and nothing checks the README so nothing caught them: "it is still the only way to get a program onto a disk, since nothing running on the machine assembles anything yet" - SplitDisk has not been the only way for two days. "this is what a self-hosted assembler will stand on" - future tense about something that has since happened. The Tests section also claimed five checking scripts and then listed makedisks.sh among them, which builds fixtures rather than checking anything. It is four checks and a runner. Every command in it was run: assembling hello.asm and running the result, and booting the disk to see Snake.sbx load. Three em dashes crept in and were taken out - the whole tracked repository is plain ASCII again, which is now verified rather than assumed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
ccf4b384e1 |
Give Programs/ one rule: a directory per kind, nothing loose
Five .asm files sat at the top of Programs/ beside six directories, with
nothing to say which a new file should join - and hello.asm, which is the
native assembler's first target and named in sixteen places, looked like a
stray.
Programs/
Examples/ what you read to learn: hello, printHello, inputTest,
replCalculator, and Fibonacci, primeSieve and gameOfLife
as sets of their own
Libraries/ included by name, no entry point of their own
Loader/ loader.asm, and the loadable program it reads
CosmOS/ the system, its applications and its assembler
testPrograms/ what 'make test' drives
Loader/ is the one worth explaining. loader.asm is not a demonstration: it
reads a program off a disk, puts the two pieces where the header asks, and
jumps to the entry. CosmOS grew out of it and does the same thing as one of
its commands. It is kept because backward compatibility with the simplest
version of the system is a standing goal, and it was sitting loose next to
the demos as though it were one.
Programs/loadable/ was a directory holding one file called hello.asm - a
third thing of that name, and the name said nothing about why it was there.
It is Loader/loadable.asm now, beside the loader that reads it.
Every reference moved with them: the makefile's program list, twelve
manifest lines, makedisks.sh, native.sh, and four paths across the README
and both manuals. Verified by deleting both build directories and running
the whole suite from nothing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
6dbb38b209 |
Stop committing assembled programs, nine of which had gone stale
Thirteen build artifacts were tracked: ten .bin files, a disk image, and the text file that had been put on it. Every one is produced by 'make' in Programs/ from a source file that is also tracked. NINE OF THE TEN BINARIES DISAGREED WITH THEIR OWN SOURCE, including Programs/CosmOS/Bin/cosmos.bin - the operating system. Only hello.bin still matched, and that by accident. That is worse than shipping no binary at all. A repository holding both a source file and a stale build of it has two answers to what a program does, and the wrong one is the one that runs. Somebody reads the source, runs the binary, and sees behaviour that is not in the code with nothing to tell them why. Nothing referenced any of them - not the makefiles, not the tests, not the manuals. Checked before removing, and checked after: the suite passes, and a clean clone with all of them gone builds both tools and assembles every program from source alone. .gitignore now covers *.bin, *.sbx and *.img, unanchored, because a build output may appear anywhere a source file lives. Programs/CosmOS/Bin/ held cosmos.bin, disk.img and a 17 byte hello.txt that existed only to be put on that image. It was a snapshot of a demo from before Tests/makedisks.sh built its own fixtures, and it goes with them. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
fb335681d2 |
M4: SplitBit assembles SplitBit, and then assembles itself
> load Asm.sbx
> run cosmos.asm
wrote cosmos.bin: program 7036, data 2448, labels 475
> run Asm.asm
wrote Asm.sbx: program 7533, data 4099, labels 555
Both byte for byte identical to what the host assembler builds from the
same source. The machine now builds the operating system it is running on,
and builds the thing that built it.
THE CHECK THAT MATTERS MOST IS THE THIRD ONE. A binary that matches could
still have come from an assembler wrong in some way this particular source
happens not to exercise. So Tests/native.sh boots the CosmOS that CosmOS
built and has THAT assemble CosmOS again - and the second generation is
identical to the first, down to the cycle count. It is a fixed point: the
machinery has been through itself. After this the host is a convenience
rather than a necessity.
WHAT STOOD IN THE WAY was not the assembler. It loaded, faulted at 7,780
cycles, and the fault was in CosmOS: a loaded program is staged at 0x8000
before being blitted into place, so the whole FILE has to fit in the 32,768
bytes above it. The assembler's file was 33,983, and 22K of that was
zeroed scratch buffers - because #Reserve emits what it reserves.
None of that is initialised data. It is scratch, wanted only while the
assembler runs, and while it runs everything above its own data is free.
So the buffers are a MAP now rather than declarations - Assembler/scratch.asm
writes down six addresses and the file carries none of it. 33,983 bytes
became 11,648, and the assembler could load itself.
The map has a file of its own because the reader and the label table both
need addresses out of it while neither includes the other.
The sizes are cut to the largest thing it is asked to build, and that turns
out not to be the operating system: the assembler is 555 labels and 11,648
bytes of output against CosmOS's 475 and 9,564. The hardest thing this
assembles is itself.
Also: sizing it for CosmOS meant raising the label table, and raising the
label table is what pushed the file over the staging limit. The two facts
only met because the first one was tried.
Speed, measured rather than guessed: CosmOS takes 80,168,646 cycles, which
is eighty seconds of emulated time and under a second under --fast. Most of
it is a straight walk of 475 label names, several thousand times. Sorting
or bucketing that is easy and was deliberately not written before there was
something to measure.
make run-cosmos now puts every source file on the disk, so the whole thing
can be done rather than read about.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
20989c3439 |
M3: programs that bring their own vectors
> load Asm.sbx
> run Keys.asm
wrote Keys.sbx: program 558, data 85, labels 52
> load Keys.sbx
> run
keys, by interrupt. q stops.
ab
the console has been handed back
The machine assembles a program carrying an interrupt handler, the loader
installs its vector, the console interrupts into it, and the shell takes the
vector back at exit. Byte for byte identical to the C assembler's, and
Tests/native.sh now checks a boot image and four loadable programs on every
run.
WHAT IT TOOK:
A declaration and an implementation are the SAME ENTRY. services.asm says
a service is called osPrintString and has number 16; cosmos.asm says
osPrintString is handled by handlePrintString. The name is met twice and
the second time fills in the handler, which is what lets one shared file
serve both the caller and the implementer.
So the first pass declares and the second implements. That is forced: a
handler is an address, and no address is known until every label has been
placed.
Boot in a loadable program fills the entry field rather than being
installed - vector zero is where the whole machine starts, and a program
loaded into a running system has no business saying anything about that.
A boot image is the one thing that does, so there it is installed like any
other, behind a "VEC" marker in the SPBT file.
Device is named by the port, and Device with the five reserved names are
matched without regard to case, the way mnemonics are: they are part of
the language rather than names the programmer chose. Devices have no names
of their own, so they are given one nothing can type.
TWO BUGS, both of a kind worth naming.
The first: "is this a loadable program" was written out as an OR of the two
segment bases in seven places, and the sense wanted is the opposite in most
of them. One of the seven had it backwards and put a version ONE header on a
file carrying vectors, which a loader is right to refuse. It is one flag
now, settled once and tested the same way everywhere.
The second: finding the entry to write a handler into means calling vecFind,
which reads the entry's fields out - including the handler it does not have
yet. An address resolved into VecHandler before the find was overwritten
with zero by the find itself, and the file came out with a vector pointing
at address zero: a slot that looked installed and went nowhere. The
resolved address has a variable of its own now.
Keys.asm and console.asm go on the CosmOS disk, so the whole path can be
watched rather than only tested.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
04424a8917 |
Put the application hello.asm on the disk, not the bare metal one
Both are called hello.asm and they are different programs: Programs/hello.asm
is the 1978-style boot image that writes straight to port 0x00 and HALTs,
and CosmOS/Apps/hello.asm is the loadable one that ends with SWI osExit.
The disk had the first, which assembles to a .bin the shell cannot load, so
watching it work meant taking the file off the disk afterwards.
Now it has the second, and the whole thing is two commands:
> load Asm.sbx
> run hello.asm
wrote hello.sbx: program 22, data 14, labels 3
> load hello.sbx
> run
Hello, World!
It writes over the hello.sbx the host tool put there, so what runs is the
machine's own work. Byte for byte identical to the C assembler's, as ever.
strings.asm stays as it is, and now earns its place by being the odd one
out: no #Include and no #Base, so it assembles to a boot image rather than
a loadable program and the difference between the two is visible on one
disk.
Tests/native.sh still builds the bare metal hello.asm, and should: it is the
only thing that checks the SPBT path end to end, including running what came
out.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
c5e4ec3455 |
M2: the native assembler builds applications
> load Asm.sbx
> run Say.asm
wrote Say.sbx: program 46, data 93, labels 7
> load Say.sbx
> run built by the machine itself
it says: built by the machine itself
The machine assembles an application and then runs what it built. Say,
greet and Files all come out byte for byte identical to the C assembler's,
and Tests/native.sh checks all three on every run alongside the boot image
M1 already covered.
WHAT IT TOOK, and it was more than #Include and #Base:
#Include The reader is a stack of readers. The current file's whole
state goes aside - buffer and all, 292 bytes - the new one
opens, and the end of it pops the old one back. A file goes in
once; including it twice does nothing, which is what lets two
libraries depend on a third. The list is forgotten between the
passes, because the second has to walk the same tree.
#Base Cursors start there, so labels hold the addresses the program
will really have. A program that says where it goes gets the
SBEX header and a .sbx name; one that says nothing gets SPBT
and .bin. A program that bases one segment and leaves the
other unbased with content in it is refused.
#Reserve Runs of zeroes, moved over in the first pass and written in
#Align the second. How many an #Align comes to depends on where the
cursor has reached, which is why both passes keep a cursor.
#Vectors Names are read and numbered, pinned where the source pins
them, so SWI osPrintString resolves. Every application needs
this - a program that calls a service names a vector declared
in a file it includes.
THE TWO PASSES ARE NOW ONE LOOP, walked twice, with Emitting the only
difference. They have to agree about the length of every token, and the way
they stop agreeing is by being two pieces of code that drifted apart -
which is the exact shape of the bug this assembler found in the C one.
Sharing the body means there is nothing to drift. What is left is checked
anyway: the second pass compares its own totals against the first's and
refuses to write the file if they differ.
THE BUG WORTH RECORDING. The tokenizer holds one character of lookahead,
and at an #Include that character belongs to the file being put aside. It
was carried across and handed back on the way out, which is wrong: a file
runs out in the middle of whatever the tokenizer happens to be doing, so
the character arrives in the middle of a word. `start:` came back as `s`
and then `tart:` - and the result assembled into a perfectly plausible
file. The fix is to undo the read instead, so the character is simply still
there when the file is opened again and the question of when to hand it
back never arises.
Three smaller ones, all old friends: three places took the CONTENTS of a
buffer where they wanted its ADDRESS; vecTakeAuto returned its answer in A,
which a RET puts back; and pass two re-declared every vector because only
the label table was being skipped on the second walk.
sameText moved down into numbers.asm from the label table - four parts want
it now, and a reader test that includes neither labels nor tokens has to
build on its own.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
affe9d09ea |
Put the assembler and some source on the CosmOS disk
'make run-cosmos' now boots a machine with Asm.sbx on the disk and two
source files to point it at, so the thing can be watched working rather
than only tested:
> load Asm.sbx
> run hello.asm
wrote hello.bin: program 17, data 14, labels 2
> run strings.asm
wrote strings.bin: program 62, data 88, labels 4
Both come out byte for byte identical to the C assembler's, and both run.
hello.asm and testPrograms/stringKeyword.asm are the two single-file
programs with no #Include, which is what the native assembler handles so
far; strings.asm is the second because it has a subroutine and a label
used before it is defined, so it exercises a forward reference that
hello.asm does not.
The assembler builds from its own directory rather than from Apps/,
because it is not one file. Its pieces are found beside it without being
told, since an include is looked for next to the file that asked for it
before anywhere else; only services.asm needs the include path.
ALSO A CORRECTION. Asm.asm's header, its usage message and the Assembler
Manual all said 'run Asm.sbx hello.asm'. That is the convention we talked
about wanting later, not the one this shell has: load and run are separate
commands, so the whole rest of the run line is the argument and that form
asks for a file called "Asm.sbx hello.asm". All three now say load first.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
dcb331c151 |
SplitBit assembles SplitBit: M1, a single file with no includes
Programs/CosmOS/Assembler/ is an assembler written in SplitBit assembly. It
runs under CosmOS, reads source off a SplitBit disk, and writes a binary back
to it with no host involved anywhere:
> run Asm.sbx hello.asm
wrote hello.bin: program 17, data 14, labels 2
THE ACCEPTANCE TEST IS THE BYTES. Tests/native.sh assembles Programs/hello.asm
both ways and compares the two files byte for byte, then runs the one the
machine built. "It ran" and "the sizes look right" both pass for a binary with
a label one byte out, which is a program that jumps into the middle of an
instruction - so the only honest test is the one SplitDisk and sbfs.asm
already work under: two implementations of one written specification, each
checking the other. The files are identical and the result prints Hello,
World! in 70 cycles.
hello.asm is the target because it is the oldest program in the repository.
The first thing this machine ever ran is now the first thing it assembles for
itself.
TWO PASSES OVER STREAMED SOURCE. The C assembler reads every token of every
file into one array; that cannot port, because cosmos.asm alone is 56,047
bytes against 64K of Data Memory. The native one streams through a 256 byte
window, twice, and keeps only the label table between the passes. Two passes
suffice because every length is known without resolving anything - an
instruction's from its shape, a value's is one, a string's is its characters
and a zero - so the first pass fixes every address and the second never needs
a fixup list. A forward reference stops being a special case and becomes the
reason there are two passes at all.
The parts, each checked before anything was built on it:
source.asm characters out of a file of any size, with a line number
token.asm tokens out of characters, one character of lookahead
classify.asm what a token is, in the C assembler's order, which IS the
language: keyword, instruction, value, string, label
labels.asm names packed in an arena, four bytes of index each
numbers.asm sixteen bit arithmetic, since sbfs.asm's cannot be reached
table.asm the instruction set, generated by the same script the
monitor's copy is, and now BOTH are checked by docs.sh
readTest.asm and tokenTest.asm check the reader and the tokenizer on their
own, recorded as cosmosSource and cosmosTokens. A wrong classification does
not produce a wrong byte somewhere obvious; it produces a right looking
program of the wrong length, so it is worth catching where it happens.
WHAT IT REFUSES: #Include, #Base, #Align, #Reserve and #Vectors are refused
by name rather than ignored. Skipping a directive would produce a file that
looked right and was the wrong length, which is the worst thing an assembler
can do.
Two traps worth recording, both already known to this project and both hit
again: CALL restores A, B and DP0-DP2, so three routines returning an answer
in A had it undone by their own return; and numStep works on DP0, so three
sites that set DP1 left a pointer that never advanced.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
a131a90c67 |
A string that spells a directive is a string, not a directive
The quotes are gone by the time a token is classified, so checkIfKeyword's test of token[0] == '#' matched the STRING "#Program" sitting in a program's Data Segment. It was read as the directive: the segment silently changed in the middle of the data, the string's nine bytes were charged to the Program cursor instead of the Data one, and every label defined after it came out nine bytes wrong - in a file that still had a valid header, a plausible length, and nothing to say about any of it. The only symptom was a program that jumped into the middle of an instruction. This is the FOURTH of the family. A string spelling a mnemonic assembled as that instruction; a string beginning with a zero was rejected as a malformed literal; a string in the Program Segment was discarded in silence. The instruction check and the literal check both carry a "not a STRING" guard already. This one did not, so it has one now, and it lives inside checkIfKeyword rather than at the call site so it cannot be left off again. Nothing had ever triggered it, because nothing had ever needed a directive's name as data. An assembler written FOR this machine necessarily does: it has to compare tokens against "#Program" and "#Data". It was found by building one and watching it fault on its second instruction. Test stringKeyword puts every directive name in a program's data and prints a label defined after them. Verified that it bites: without the fix the assembler refuses the file outright. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |