6073086584feaf8bcd053e6e28eb0dc2d8099013
10
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  AnachronautandClaude Opus 5
|
81e544eb3d |
Load a program that has no data
A five instruction program that writes one port and exits has no Data Segment at all, and the loader stopped the machine dead on it. It asked the memory controller to move a segment of no bytes, and a length of zero asks for the whole 64K - which is the machine's rule, and a reasonable one, since two bytes cannot say 65536 and a transfer of nothing is not usually what anybody meant. It is exactly what was meant here. 64K did not fit, the controller refused, and the load stopped half done. ON A TERMINAL THAT PRINTS A FAULT WITH AN ADDRESS. Behind a window it is a frozen picture and no reason at all, which is how it was found and is a separate problem from this one. The header says how long each segment is, so the loader knows before it asks. Both bytes are already in hand, so the test costs one OR. Nothing is lost by skipping the transfer: a blit leaves the controller's addresses past whatever it touched, and a blit of nothing would have left them where they already are, which is where the vectors are read from next. Guarded for the code segment too. A program with no code is equally assemblable and would have stopped in exactly the same place. Mode.sbx is the fix's test and a program worth having on its own: forty columns or eighty, whichever the screen is not in, which is what a person wanting Snake drawn twice the size actually needs. Ten instructions and no data, deliberately - it prints its two digits a register at a time rather than from a string, so it stays the smallest shape a loadable program can take. Nothing else on that disk had ever been that shape, which is why nothing had ever tried it. Reported by the user, who wrote the program. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
736037462e |
The shell edits the line it is given
Three different things used to do this job, and which one you got depended on where the machine was running. On a terminal the host held the line and did the echoing and the backspacing; behind a window the console's own gatherer did it; from a file nothing did it at all. One job, three implementations, none of them in the system - which is why there was no way to move about in a line and nowhere for a history to live. So editLine does it. Key mode while a line is being read and line mode straight after, so nothing else in the system and no program calling osReadLine notices anything changed. Left and Right, Home and End, Backspace for the character before the cursor and Delete for the one under it, and anything typed goes in where the cursor is with the rest of the line moving along. Ctrl-D means the end of input again, on an empty line, because that was a thing the terminal did while it was holding the line and it is not holding it now. Same trade as the echoing. MOST KEYSTROKES DRAW NOTHING BUT THEMSELVES. A character typed at the end of a line needs no cursor moved: printing it is the whole change, and a backspace there is three ordinary bytes. That matters beyond speed - moving the cursor by hand is what a terminal is TOLD about, in an escape sequence, so redrawing on every keypress would fill every recorded transcript in this suite with them. The line is only reprinted when something happened in the middle of it. Where the line STARTS is worked out backwards from where printing ended, rather than trusted from what was remembered. That is what makes it survive the screen scrolling: a line printed on the bottom row moves everything up by one, and a remembered row would be one too low from then on. The command line holds 127 characters, up from 63. The limit started to be felt the moment a line could be moved about in. 58 recordings changed, and every one of them by the echo. THE PROOF IS NOT A HEURISTIC: a CosmOS built with the echo silenced reproduces 187 of the 188 recordings byte for byte. The one exception is cosmosTyped, the backspace test, where the rub-out marks now come from the shell instead of from the console's gatherer - same marks, different author. cosmosEditKeys is the new test, and every line in it is typed wrong and then corrected with a different key. Its last line is eighty six characters at a prompt in column two on an eighty column screen, so the line runs onto the row below and the shell has to find the start of something it can no longer see; breaking either half of that arithmetic fails it. Also: agree.sh looked for "> the same", anchored to a prompt that no longer precedes what a command prints. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
0852666e73 |
Mirror the source tree onto the system disk
A list of files in a makefile goes stale the moment somebody adds a program and forgets to name it, and what they forgot is invisible until they go looking for it on the machine. So SplitDisk gained a mirror command and the disk rule is one line: putting a file where the others live is now the whole of putting it on the disk. EVERY FILE GOES THROUGH put AND EVERY DIRECTORY THROUGH mkdir. That is the point of it - mirror adds a walk and no filesystem code at all, so anything the format refuses here it refuses everywhere, in the same words. What is new is the walk, and the walk is what the six checks in Tests/disk.sh are about: that it goes all the way down, that it leaves dotfiles and named directories behind, and that a name too long stops it. REFUSED RATHER THAN SKIPPED, because a disk quietly missing a file is the exact failure a mirror exists to prevent. Which meant four sources had to be renamed - a directory entry holds 22 characters and they were 23, 23, 24 and 29: 16bitSegmentedSieve.asm -> 16bitSieve.asm 16bitSegmentedSieveModern.asm -> 16bitSieveModern.asm consoleInterruptTest.asm -> consoleInterrupt.asm controllerWriteTest.asm -> controllerWrite.asm The test names in the manifest are unchanged, since those are identifiers and every recorded result is filed under them. Only where the source lives has moved. The entries are sorted before anything is written. readdir hands them back in whatever order the host filesystem feels like, and a disk image that comes out different from one run to the next is an image no test could compare against another. The disk grew from one megabyte to four and from 192 directory entries to 1,024. The sources are 2,850 blocks and the mirror filled the old directory on its first run, which is a thing that should not need thinking about again. The Tests fixture disk is deliberately NOT mirrored. It is a controlled fixture with known contents, and the shipped disk is the one meant to be useful; they want different things. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
Anachronaut
|
89c667848b |
Edit read a file into a buffer it never checked the size of
Opening hello.asm showed a thirty one line file as three, one of them cut short. Opening it again hung the machine: the emulator kept running and nothing ever answered. Entry is the buffer a line is read into, and it is followed in memory by TextHead and ArenaFree - the head of the document, and the pointer its line allocator hands out. The loop that splits a file into lines copied characters in WITH NO BOUND AT ALL, so a 94 character line wrote thirteen bytes over both of them. The list head then pointed into the middle of the text and the allocator handed out an address inside the file, which is why the second open walked a list that led back into itself for ever. Typing was always safe. osReadLine is told how much room there is, so a new document behaved perfectly and a source file did not - which is exactly how the user found it, and why it looked like a mystery rather than a bug. The bound is there now, and the buffer is 128 characters: what a line is everywhere else on this machine, the same number configuration files use, rather than a second answer to a question already answered. hello.asm fits. A file with a longer line is REFUSED rather than shortened. This is an editor - a line cut on the way in would be written back cut, and the file damaged by having been looked at. It says so and exits with a status of one, which it can do since this afternoon; the file is byte identical afterwards, and the test checks that. Opened twice in the test, because once is not enough to see it: the first open does the damage and the second is what never returns. This is the third time this shape has turned up: a buffer written past its end into the variables that happened to follow it. The prompt walked off CwdText into the shell's own command names; the assembler's output ran into its label table. Every one was found by a person using the machine. |
||
|
Anachronaut
|
87d819847e |
A program can say how it went
SWI osExit takes a status in A, and the shell keeps it. Fifty eight exits across twenty three programs now say deliberately whether they worked: 25 did what they were asked, 24 did not, 9 were asked wrongly. Compare is the exception and says so - one there means the files differ, which is a result rather than a failure, the way diff has always had it. IN A RATHER THAN Q, which is not a departure from the rule that a service answers in Q. This one takes an ARGUMENT, the way osPrintNumber takes A and B, and it never returns to answer anything. A is free precisely because a return would have put it back - and Q is the ALU's output, so a small number costs four instructions there against one in A. The shell does not print it. A program that failed has already said so in words and a number beside that is noise, so osLastStatus hands it back and Status is the program that shows it. That indirection is the point: the number exists for the thing that cannot read words. MARKING THE EXITS FOUND A DEFECT ON THE FIRST RUN. Type and More printed why they had failed and then fell through into the success exit, reporting that all was well. Nobody had noticed, because while the only reader was a person, the person could see both the complaint and the claim. Two smaller things. Snake sets the console to line mode and then exits with zero, and the linter flagged the second RSTA as redundant - an exit status and a console mode, equal by accident, which is the class that must never be collapsed. And the README still taught answering by writing into the frame, three months of habit that SRET replaced yesterday; that section is gone and the one describing SRET stands in its place. |
||
|
Anachronaut
|
546f336823 |
Configuration files, and boot.cfg as the first of them
One setting to a line: a key, a space, the rest of the line is the value. A semicolon starts a comment. The format was noticed rather than designed - textSplit already cuts the first word off a line and leaves the rest, and textSame already insists two strings end together, so reading a setting is those two routines and a loop. It is also what the shell reads, which makes a configuration line a command line the machine reads instead of a person typing one. The format was chosen by asking what the BOOT LOADER could manage, because it is the worst case in every direction: a few kilobytes, no operating system to report to, and if it fails the machine does not start. Two formats would be worse than one and the loader cannot have the richer one. CONFIGURATION IS ADVICE. A missing file, a missing key, an unusable value, a line too long to read: all of them mean use the default and none is a failure. BUT QUIET IS NOT SILENT - a setting somebody meant, which did not take effect, says so. That was the user's addition and it is the better rule: the default alone leaves the only symptom being that the machine did not do what somebody asked. So two routines. cfgGet reads and says nothing, because reading three settings should not report one bad line three times. cfgCheck reads the file once and reports, and is handed the caller's list of keys - whether a key means anything is the only part of this a shared reader cannot judge. /System/Boot/ holds the boot files, and stage two reads boot.cfg for what to start, with a fallback to try if it does not work and a name compiled in for when the file says nothing. THE TEST FOUND A REAL BUG, and it is the interaction I would not have thought to look for. First-match-wins met an empty value: a file with system system /System/Boot/bare.bin matched the first line, handed back nothing, and the machine tried to start a file with no name while a good setting sat underneath. An unusable value is an absent one - which is what "configuration is advice" says, and this is where it earns its keep. cfgBare starts an image with no operating system in it at all, which is what loading an ordinary boot image buys: a program wanting the whole machine is a file like any other, chosen the same way the system is. Three disks differing ONLY in boot.cfg, so each is a test of the file rather than of the machinery under it. |
||
|
Anachronaut
|
c312853f8e |
The machine starts itself
stage two CosmOS > saved it read it back, 22 bytes: Stage one hands over to stage two out of a boot slot; stage two mounts the filesystem, finds /System/cosmos.bin, takes the image apart and places its code, its data and its vector table, and jumps to the entry point the vectors named. Nothing placed memory for it. What it loads is an ORDINARY BOOT IMAGE, the same SPBT file the emulator has always been handed. That was the user's call and it is the whole trick: a second stage that loads the machine's normal image format is not a boot-specific mechanism, so bare metal SplitBit stops being a special case. A program wanting no operating system under it is just an image, written under CosmOS like any other, and startable because it is a file. Three things in it worth knowing: - THE ENTRY POINT IS CAUGHT ON ITS WAY PAST. Program Memory cannot be read back, so the boot vector cannot be looked up after being installed; the vector loop notices the one addressed at 0xFC00 and keeps it. - A missing "VEC" is not a fault. An image written before vectors existed simply ends after its data, and then the entry point is zero, which is what every such image has always relied on. - Feature flags that are set mean an image asking for a machine this may not be, and the honest answer to a request that cannot be understood is to refuse rather than to run it anyway. The test records that the system WORKS afterwards rather than that it started. A loaded program running is what says the vector table arrived, because a program reaches the system through SWI and nothing else; the file written and the directory entered say the filesystem and the console came up with it. A second disk has a boot slot and nothing to start, and says so rather than jumping somewhere. |
||
|
Anachronaut
|
82adeeb193 |
A boot payload can arrange its own Data Segment
Stage one places Program Memory and nothing else, because knowing where a payload's data ends and its code begins would mean knowing a format, and knowing formats is what ROM must do as little of as possible. But the real second stage needs a Data Segment: sbfs.asm has variables and a string it compares against. The answer needs nothing new. A loadable image is written into the slot as code followed by data, so the data image is already in Program Memory just past the code - and the payload's first instructions blit it down to where it was assembled for. Proved by slotData.asm, which prints from a string it placed itself. The padding is the part worth recording. The blit needs a length and the assembler will not work out the difference between two labels, so the segment is padded to a round number and that number is what gets copied. The first draft padded to 257 and copied 256, and the byte that did not arrive was padding, so it worked by luck. It is exact now and says why. This is the shape the user asked for and it goes further than the mechanism: the second stage becomes a loader for the machine's ORDINARY image format rather than for anything boot-specific, so bare metal SplitBit stops being a special case. A program that wants no operating system is just an image, developed under CosmOS like any other, and selectable at boot because it is a file. |
||
|
Anachronaut
|
d07b23f90b |
Rung 2: the machine starts itself off a disk
Stage one exists and works. It is 330 bytes of program and everything it knows is a thing that will be true forever: which port the disk is on, that a SplitBit disk begins with its own name, and where two numbers sit in that first block. Not what a file is, not what a directory is, not that SBFS has versions. It reads the live boot slot into Program Memory, jumps to the first byte, and prints one character and halts if there is nothing there. It is an ordinary boot image for now, so the whole chain runs on machinery that already exists and the emulator has not been touched. Nothing about it changes when it moves into ROM except who puts it in memory. SplitDisk gained "boot" to write a slot and "bootslot" to choose one, kept apart on purpose: writing a slot and starting from it are different decisions, and joining them would make every write a commitment. A slot is always written WHOLE, because one still holding the tail of what was there before is one whose contents depend on its history, and stage one reads all of it without knowing where the file stopped. Three recorded tests, and the pair is the point: two disks differing only in which slot the superblock names, with payloads that say different things. One prints "booted" and the other does not, so this is a test of CHOOSING a slot rather than a test that some bytes were read. The third boots a disk with no boot area and gets the one character a ROM has room for. Eight more host checks, including that a slot is padded whole. Two things worth recording. The first draft used #Align to put the scratch buffer at 0x8000 and produced a 33K file - thirty two kilobytes of zeroes in something meant to be a ROM. It is an address, not storage, which is exactly what the assembler's own scratch map exists to say. And SplitLint caught the second in code written an hour after the baseline that catches it. In the blit set-up, RSTA writes a source address of zero and then RSTA writes a bank number of zero - two unrelated quantities that are equal by accident, in the most safety critical file in the repository. It is marked with a reason rather than removed. |
||
|
Anachronaut
|
0a2965bc63 |
Name the rules, say when there is nothing to say, and hold a baseline
Four things SplitLint wanted, and they build on each other. EVERY WARNING NAMES ITS RULE, in brackets at the end the way a compiler names the flag that produced it. Twelve rules, listed by --help. That makes the other three possible: suppressions can name one rule and leave the line honest about the others, the harness can assert on a rule's identity rather than on the wording of its message, and --machine can print one tab separated line per warning - file, line, rule, message, help - so nothing downstream reads prose. This file's own output was parsed with regular expressions three times in one day before it had a shape to rely on. A CLEAN RUN SAYS SO: No style warnings: 121 files checked against 12 rules. It used to exit in silence, which does not tell you it found nothing - it tells you nothing at all, and from outside the two are identical. A MARKER THAT SILENCES NOTHING IS ITSELF REPORTED, as dead-suppression. An exception that outlived whatever made it necessary is the thing the required reason exists to prevent, and naming the wrong rule now gets you both the warning you meant to silence and a note that your suppression is doing nothing. AND THE CORPUS IS HELD TO A BASELINE. Sixty one warnings are left in it deliberately and nothing stopped a sixty second. Tests/lint-baseline.txt records how many of each rule each file should produce, so a new one fails make test while the sixty one stay quiet; confirmed by adding an INIA 0d0 to Say.asm and watching it name the file, the rule and the count. It counts per file and rule rather than recording line numbers, because line numbers would churn the whole baseline whenever anything was inserted above a warning - the same reason cycle counts are stripped from recorded output here. ./Tests/lint.sh --bless records it again. One thing to know for next time: the rule name was inserted before the line number at all twenty one call sites, and the signature was changed to match rather than the twenty one call sites being fixed. (path, rule, line) reads no worse than (path, line, rule) and one edit has fewer ways to go wrong than twenty one. |