The Segan Voyager is the same SplitBit with a screen and a speaker instead of a terminal,
and this is the rung that makes there be two of them at all. Everything that is actually
the machine - the CPU, the controller, the devices, the run loop, the reporting - moves to
machine.c, and each front end brings one file of its own. emulator.c is now sixty lines of
argument handling and a three line loop.
The machine runs in SLICES rather than to completion, because that is the cut a window
needs: run a slice, present a frame, run another. A terminal runs slices until the machine
stops. Both loops are three lines, which is why the cut is there rather than anywhere else.
At this stage Voyager's window is empty. There is no video device yet and inventing a
temporary way to draw would mean building something to throw away.
PLAIN MAKE STILL WORKS WITH NO GRAPHICS LIBRARY. Raylib is probed by compiling and linking
against it rather than by looking for a file, because a header with no library behind it
passes a file check and then fails at link time. Where it is missing, make says so once and
builds everything else - the machine, the assembler, the disk tool, the linter and the whole
suite. A project about a small understandable CPU should not need OpenGL to run its tests.
That nearly broke here: make strict globs Source/Emulator/*.c, so it would have tried to
compile voyager.c and failed on precisely the machines the split exists to support, and this
machine has Raylib so nothing would have caught it.
Tests/voyager.sh runs the WHOLE MANIFEST through Voyager and holds it to the recorded
results SplitBit is held to. Not that the two look alike: that one satisfies every recording
the other does, byte for byte, exit status included. It reuses run.sh, which now takes the
machine from SPLITBIT_EMULATOR, rather than keeping a second copy of the runner that would
drift. Voyager not being built is not a failure - it says so and passes.
Verified both ways. Made Voyager print one extra line, and 114 of 165 failed: exactly the
tests that run the emulator, with the 51 assemble-only and xfail cases correctly untouched.
Removed the binary, and the script skipped. Built with HAVE_RAYLIB=no, and everything else
still built and checked clean.
--headless is taken out of the arguments in voyager.c rather than in the shared parser,
which should not learn about a window only one binary has. It exists so the suite can run
this binary at all: a front end that could only be exercised by a person looking at it would
be a front end nothing checks.
loadFile takes a const char * now, which it always should have.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
Until now the only way to restart was to stop the emulator and run it
again, which meant the one thing the machine could not do was the thing
Once was written for. The loop now closes without leaving it:
> Once /System/Boot/bare.bin
next start: /System/Boot/bare.bin, once
> Reboot
starting again
stage two
just this once: /System/Boot/bare.bin
bare metal: no system, just this
Writing 1 to port 0x13 asks the machine to start over. A PORT RATHER THAN A
SERVICE, because a reset has to work when the system does not: something
only askable through SWI would be unavailable in exactly the case that
wants it most, and a program that owns the whole machine has no system to
ask. It is device class 0x04, in the range kept for the machine rather than
among the peripherals, because it is not one - it is not attached to
anything and cannot be unplugged.
WHAT A RESET REPEATS IS HOW THE MACHINE STARTED. Named an image, the
emulator places it again; named none, the ROM is shadowed again and reads
the disk. Anything else would mean a reset changed what the machine IS,
which is the one thing a reset must not do. Both are tested.
Taken between instructions, because a device cannot restart the machine
from inside the instruction that asked: the CPU is part way through a step
and its state is not yet anything a reset could leave behind consistently.
The disk stays attached and keeps everything written to it - that is what
warm means. The vector table is cleared, which is the one deliberate
departure from leaving memory alone: a vector points into whatever
installed it, and after a reset that program is not running, so a handler
left behind would aim an interrupt at an address belonging to something
gone. It is the argument CosmOS already makes at exit, applied to the
machine.
Reboot is 45 bytes, most of them the word it prints.
./SplitBit --disk system.img
stage two
CosmOS
>
No boot image named. The emulator shadows its built in stage one into
Program Memory - boot vector included - and the CPU then does exactly what
it has always done: reads the boot vector and starts where it points.
NOTHING ABOUT THE CPU CHANGED to make a machine that starts itself, which
is what picking shadowing over a mapped ROM bought.
The ROM is generated from Programs/Boot/stage1.asm by the makefile rather
than committed beside it, because a copy of a program kept next to the
program is a copy that goes stale. That makes the assembler a real
dependency of the emulator, which it always sort of was and now says so.
od and awk rather than xxd, which is not everywhere, or python, which the
README does not ask anybody to install in order to build this.
loadROM is loadFile given bytes instead of a path: both go through one
reader over an fmemopen stream, because a ROM is a boot image and there is
no reason for the machine to have two ways of understanding one.
Naming an image still works and is what every other test here does. That
path is not a shortcut to apologise for - placing memory from outside is a
real thing real machines allow, and it is a debugger. The help says so now.
No image and no disk is the one case with nothing to run, and it says that
rather than printing a usage message about a missing file.
run.sh gained a "rom" mode which hands the emulator a disk and nothing
else. The source column still names stage1.asm, because that is what is IN
the ROM: assembling it there says the thing the emulator carries is a thing
that still assembles.
HALT is terminal - stepCPU returns at once when the Halt Flag is up, so a
halted machine does not execute, service devices, or take an interrupt -
and that has to stay true, because every test ends with a halt and "halted"
is how a program says it has finished. The consequence was that SplitBit
had no way to wait at all. Every wait was a spin, and a spin is bus
traffic: 11.5% of Type over a 14K file on a disk of ten thousand cycles,
after read-ahead had already hidden three quarters of the latency.
WAIT is 0xFE, one byte, no operands, sitting under HALT where the
instruction that almost stops the machine belongs. Three decisions in it:
- A line already standing means there is nothing to wait for, so WAIT does
nothing. That is what makes test-then-wait race-free.
- Any line ends the wait, masked or not, so a program can sleep on a device
it has no handler for and read its status afterwards. Masking says who
answers a request, not whether it happened.
- A line that wakes the CPU without being dispatched is taken down by the
WAIT. Left standing it would be found by the next WAIT, which would
return at once - the program would spin exactly as before while looking
as though it slept.
Waiting is NOT a Status bit, and that is the trap avoided rather than a
gap: Status rides into the interrupt frame and comes back out, so a machine
interrupted mid-wait would return from its handler still waiting, and wait
again for what it had already been given. An internal field instead.
Idle cycles are counted apart from bus cycles and the halt line says so
when there are any, which is what makes the difference observable at all -
with the line-clearing removed the total moves by ONE cycle, 20,100 against
20,099, and only the idle half changes, halving to 9,976. A test on
totals could never have seen it. Tests/terminal.sh asks that question,
being the file for things a recorded output cannot see, and fails with the
clear removed while "both reads finished" still passes.
Three collisions, all found by building it:
- 0xFE was the assembler's "not an instruction" sentinel. getOpcode now
answers a negative NOT_AN_OPCODE, which is outside the range of every
possible answer instead of inside the unused part of it.
- 0xFE was also what faultTest and faultResumeTest executed to provoke a
fault. They now use 0xFD and say why, because they did not fail when it
became an instruction - they HUNG, having started sleeping instead.
- Keys.asm has had a label called "wait" for a year, and mnemonics are
matched uppercased. What that reported was "Branch without label" at the
BRQ thirty lines away. The assembler now refuses a label that is already
an instruction, at the label, by name; every instruction added takes a
word out of the space of label names, so this will happen again.
The disk's status has always had a bit meaning "still going", and the header
beside it has always said to honour it. Nothing did, because nothing could: the
host finished the transfer inside the instruction that asked for it, so the bit
could never be seen up and asking about it was asking about something that
cannot happen.
--disk-cycles gives it a latency. The command is still checked at once, because
a refusal is not work - a block that is not there fails before any head moves -
but the transfer is remembered and done when the machine has run that far. Until
then the buffer holds the block BEFORE this one.
That last part is the point. A program that does not wait gets the wrong bytes
rather than an error, which is the failure the bit exists to prevent and the one
that would never have shown up. With a latency of two thousand, CosmOS could not
even mount: sbfsMount reads block zero and looks straight at the buffer.
deviceTick is the general shape rather than a disk feature. Called once per
instruction with the machine's clock, it lets anything whose moment has come
finish - which is what a display that refreshes, or a port that waits on the
host, would want in exactly the same way.
The filesystem watches the bit now, in one small routine reached with RCAL. That
is not decoration: what it hands back is the settled status in A, and CALL puts A
back the way it found it, so an ordinary call cannot carry the one thing this
exists to carry. Two bytes of Stack rather than ten, in a routine that runs on
every block the machine ever touches - the first place in the system where the
new call is the right one rather than merely a cheaper one.
The manifest takes a @N after a disk, the way it already takes :ro, so a test can
ask for a slow one. cosmosSlowDisk lists a directory at two thousand cycles a
block and gets the same listing as everything else, which is the whole assertion:
a filesystem that did not wait would print nonsense rather than fail.
Zero is the default and every other test runs at it. What waiting costs, on a
directory heavy run: 229k cycles at zero, 275k at five hundred, 415k at two
thousand, 1.16M at ten thousand.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
cycleCount used to tick once per instruction, so RSTA cost what SETD cost and a
CALL moving ten bytes of Stack cost what a branch cost. No machine anybody could
build works that way, and the emulator's job is to be the thing the hardware is
designed against.
Every touch of memory now goes through one of four accessors that charge for it:
fetching an opcode, fetching the bytes after it, reading or writing Data Memory,
and reaching a device port. One access, one cycle, nothing overlapped. The
accessors exist so the cost is counted where the access happens rather than in a
table of per instruction costs kept somewhere else - a table like that is a
second copy of what the code does, and the two drift.
The run loop spends a budget of cycles instead of running a count of
instructions, so the emulated rate means something: an instruction costs what it
touches, and a batch ends when the cycles are gone.
What the numbers say now: RSTA 1 and SETD 4, being one byte and four. LDA 3,
DPUA 2. CALL and RET together 24, RCAL and RRET together 8, because the first
pair moves twenty bytes of Stack and the second moves four. The average SplitBit
instruction costs 3.72 of these, measured over the native assembler assembling a
program.
And the measurement that prompted all of this: converting the filesystem's
hottest leaf routine to RCAL is 3.1 per cent cheaper on a directory heavy
workload. The old model said 0.0, which is what a model that cannot see memory
traffic must say about a change that is nothing else.
Three tests moved. settle() strips the cycle count from recorded output, so
nothing should have churned - but it was anchored to the start of a line and
replCalculator's last output has no newline on it, which leaves the halt message
mid line where the pattern never reached. Not anchored any more.
The two Life programs are bounded by a cycle count because they never end, and
that number was rescaled from 3,000,000 to 11,200,000 - the same amount of work
at 3.72 cycles to the instruction. Nothing about either program changed. No limit
reproduces the old output exactly, because the cut now lands elsewhere in a
frame, so they are recorded again rather than tuned to match.
Whether hardware overlaps a fetch with the end of the previous instruction is
left open on purpose. This is the conservative model; pipelining is a decision to
make while drawing the hardware, not one to inherit from an emulator.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
"Binary" was doing three jobs. It meant an SPBT file that the machine starts
from; it meant whatever the assembler happened to produce, which is now
either that or a loadable program; and it meant a compiled host tool. A word
that means three things means none of them, and the first of the three has a
name already - this project has been calling them boot images for a while
and the manuals had not caught up.
Where it means an SPBT file -> boot image
Where it means either output -> output
Where it means a host executable -> left alone
Where it means base two -> left alone
The user facing messages move with it:
Error: No boot image specified.
Usage: ./SplitBit [OPTIONS] <boot image>
Error: This is not a SplitBit boot image.
Error: This boot image is in format version 2, and this emulator reads 1.
Successfully wrote SplitBit boot image to "hello.bin".
The assembler's own help was the interesting case. Its -o writes either
format, so "the binary" there was never right - it is "the output" now, and
the message that names the format is the one that says which it wrote.
No recorded output contained the word, so nothing needed re-blessing.
Checked before starting rather than after.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
AnachronautandClaude Opus 5
Anachronaut