922511c8a75a329c3b76aabaf138f3c52c202bdf
3
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  AnachronautandClaude Opus 5
|
4fd8bf7b3f |
Step a Data Pointer with INCD and DECD, not DPUP and DPDN by one
DPUP takes an immediate, so an offset of one is legal and does exactly the right thing. It is also three bytes where INCD is two, and reads as "offset the pointer up by one" where INCD reads as "step the pointer". 56 of them across 15 files: the system, the assembler, the editor, and eight test programs. CosmOS is 9,564 bytes to 9,537, the native assembler 11,648 to 11,635, and every program in the repository together 49 bytes lighter. The worst offender was numbers.asm, written this week, where every sixteen bit helper reaches the low byte and comes back the long way round. It is the file every other part of the assembler includes, so it is the first thing anybody reads when they go looking - and it was teaching them the long way. Pattern matched off sbfs.asm rather than off the instruction table I had just embedded in two programs. THIS IS NOT TWO WAYS TO DO ONE THING. DPUP takes an arbitrary number, so one is inevitably among them; INCD earns its place by making the common case a byte cheaper. The overlap is structural and the choice is a usage question, which is a linter's job rather than an ISA's - "DPUP.n 0d01: INCD.n does this in a byte less" is a mechanical rule with no judgement in it. Nothing needed re-recording, which was not a foregone conclusion: cosmosBreak prints the system addresses the registers happened to hold, and they did not move. Both assemblers still produce identical bytes and CosmOS still builds itself to a fixed point. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
c5e4ec3455 |
M2: the native assembler builds applications
> load Asm.sbx
> run Say.asm
wrote Say.sbx: program 46, data 93, labels 7
> load Say.sbx
> run built by the machine itself
it says: built by the machine itself
The machine assembles an application and then runs what it built. Say,
greet and Files all come out byte for byte identical to the C assembler's,
and Tests/native.sh checks all three on every run alongside the boot image
M1 already covered.
WHAT IT TOOK, and it was more than #Include and #Base:
#Include The reader is a stack of readers. The current file's whole
state goes aside - buffer and all, 292 bytes - the new one
opens, and the end of it pops the old one back. A file goes in
once; including it twice does nothing, which is what lets two
libraries depend on a third. The list is forgotten between the
passes, because the second has to walk the same tree.
#Base Cursors start there, so labels hold the addresses the program
will really have. A program that says where it goes gets the
SBEX header and a .sbx name; one that says nothing gets SPBT
and .bin. A program that bases one segment and leaves the
other unbased with content in it is refused.
#Reserve Runs of zeroes, moved over in the first pass and written in
#Align the second. How many an #Align comes to depends on where the
cursor has reached, which is why both passes keep a cursor.
#Vectors Names are read and numbered, pinned where the source pins
them, so SWI osPrintString resolves. Every application needs
this - a program that calls a service names a vector declared
in a file it includes.
THE TWO PASSES ARE NOW ONE LOOP, walked twice, with Emitting the only
difference. They have to agree about the length of every token, and the way
they stop agreeing is by being two pieces of code that drifted apart -
which is the exact shape of the bug this assembler found in the C one.
Sharing the body means there is nothing to drift. What is left is checked
anyway: the second pass compares its own totals against the first's and
refuses to write the file if they differ.
THE BUG WORTH RECORDING. The tokenizer holds one character of lookahead,
and at an #Include that character belongs to the file being put aside. It
was carried across and handed back on the way out, which is wrong: a file
runs out in the middle of whatever the tokenizer happens to be doing, so
the character arrives in the middle of a word. `start:` came back as `s`
and then `tart:` - and the result assembled into a perfectly plausible
file. The fix is to undo the read instead, so the character is simply still
there when the file is opened again and the question of when to hand it
back never arises.
Three smaller ones, all old friends: three places took the CONTENTS of a
buffer where they wanted its ADDRESS; vecTakeAuto returned its answer in A,
which a RET puts back; and pass two re-declared every vector because only
the label table was being skipped on the second walk.
sameText moved down into numbers.asm from the label table - four parts want
it now, and a reader test that includes neither labels nor tokens has to
build on its own.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
dcb331c151 |
SplitBit assembles SplitBit: M1, a single file with no includes
Programs/CosmOS/Assembler/ is an assembler written in SplitBit assembly. It
runs under CosmOS, reads source off a SplitBit disk, and writes a binary back
to it with no host involved anywhere:
> run Asm.sbx hello.asm
wrote hello.bin: program 17, data 14, labels 2
THE ACCEPTANCE TEST IS THE BYTES. Tests/native.sh assembles Programs/hello.asm
both ways and compares the two files byte for byte, then runs the one the
machine built. "It ran" and "the sizes look right" both pass for a binary with
a label one byte out, which is a program that jumps into the middle of an
instruction - so the only honest test is the one SplitDisk and sbfs.asm
already work under: two implementations of one written specification, each
checking the other. The files are identical and the result prints Hello,
World! in 70 cycles.
hello.asm is the target because it is the oldest program in the repository.
The first thing this machine ever ran is now the first thing it assembles for
itself.
TWO PASSES OVER STREAMED SOURCE. The C assembler reads every token of every
file into one array; that cannot port, because cosmos.asm alone is 56,047
bytes against 64K of Data Memory. The native one streams through a 256 byte
window, twice, and keeps only the label table between the passes. Two passes
suffice because every length is known without resolving anything - an
instruction's from its shape, a value's is one, a string's is its characters
and a zero - so the first pass fixes every address and the second never needs
a fixup list. A forward reference stops being a special case and becomes the
reason there are two passes at all.
The parts, each checked before anything was built on it:
source.asm characters out of a file of any size, with a line number
token.asm tokens out of characters, one character of lookahead
classify.asm what a token is, in the C assembler's order, which IS the
language: keyword, instruction, value, string, label
labels.asm names packed in an arena, four bytes of index each
numbers.asm sixteen bit arithmetic, since sbfs.asm's cannot be reached
table.asm the instruction set, generated by the same script the
monitor's copy is, and now BOTH are checked by docs.sh
readTest.asm and tokenTest.asm check the reader and the tokenizer on their
own, recorded as cosmosSource and cosmosTokens. A wrong classification does
not produce a wrong byte somewhere obvious; it produces a right looking
program of the wrong length, so it is worth catching where it happens.
WHAT IT REFUSES: #Include, #Base, #Align, #Reserve and #Vectors are refused
by name rather than ignored. Skipping a directive would produce a file that
looked right and was the wrong length, which is the worst thing an assembler
can do.
Two traps worth recording, both already known to this project and both hit
again: CALL restores A, B and DP0-DP2, so three routines returning an answer
in A had it undone by their own return; and numStep works on DP0, so three
sites that set DP1 left a pointer that never advanced.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|