af0360128b4a14bf0d50e5faa92ec36449614936
10
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  AnachronautandClaude Opus 5
|
fb7b224bbb |
S2: the assembler writes the file as it makes it
The output image is gone. It was eighteen kilobytes and it is now one block of window, because the file was always produced in order and only ever needed to be written that way. Everything works in FILE OFFSETS now. A cursor is a two byte number counting from the front of the file, and since a block is two hundred and fifty six bytes, the block it lands in is the offset's high byte and the place within that block is its low one - so there is no division anywhere, and ImgWalk, ProgPut and DataPut needed no change but where they start. ONE WINDOW RATHER THAN THREE. The plan said three: one per segment, and a third for the block where the program ends and the data begins, which belongs to both. Fetching a block back instead makes all of that one case. The header is patched after every byte is out, the boundary block is written by both cursors, and both are simply revisits - a revisit is what fetching handles. osFileFetch is the service that allows it, and is the read side of the write. A run of bytes in one segment costs nothing extra; a switch between segments costs two block operations, and a source file has a few dozen switches and several thousand bytes. Two bugs, both a pointer meaning two things: putAt took the cursor to advance in DP2 and then wanted DP2 for the window's address. A call puts DP2 back the way it was AT THE CALL, so the step at the end moved whatever the last call had left there - the window walked off across memory while the cursor stood still. It goes in memory now, like the block did in S1, and for the same reason. The size the file is created at could not be right. How many vectors are actually installed is not known until the second pass has resolved their handlers, and by then the file must already exist to be written into - so Keys, which brings one vector, came out four bytes short. Teaching the first pass to count them meant teaching it about devices, and about a Boot line in a loadable program not being installed at all, which is two ways to disagree with the second pass about what a file contains. So osFileDone is told the size instead. A writer asks for as much as the file could possibly come to - the whole of it plus four bytes for every vector DECLARED, which no file can exceed - and says what it really came to at the end. The blocks it did not use go back to the free count. Asking for too much costs a moment; asking for too little writes off the end of a file. That is a better service for it, not a workaround. A writer that cannot know its size until the last byte is the ordinary case, and it is exactly the case this whole rung exists for. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
9f7dffdeca |
S1: the write side learns to stream
osFileStart, osFileWrite and osFileDone are the mirror of osFileInfo and osFileBlock. A program can now write a file it never holds: Pour writes twelve blocks and a tail while keeping 256 bytes of it at a time, and the host tool reads all 3,112 bytes back with every block where it was put. ONE WRITE IS OPEN AT A TIME AND COSMOS HOLDS IT. Reading needs no state - a name and an index are the whole question - but writing safely does, because the new file has to exist before the old one is thrown away and something has to remember which temporary belongs to which name. Keeping that here means the careful order is written once instead of in every program that streams. Nothing already on the disk is touched until osFileDone, so a disk without room says so while the old file is still there. That is stronger than osFileSave can manage, where the size is only known once the caller has every byte in hand. osFileSave stays: Edit and Files hand over whole documents and have no reason to learn any of this. osFileWrite refuses an index past the end of the file, and that refusal is not politeness. Files are contiguous, so block nine of a three block file is a real block belonging to something else, and writing it would put one file's bytes inside another with nothing anywhere saying so. Checked both ways: the tail block is allowed and the one past it is not. Three bugs, all of them the same shape - a register or pointer used for two things at once: DP3 carried the block count in and was popped high byte first, which is the wrong way round from every reader in the system and made the count two hundred and fifty six times too big. sbfsStreamStart took the name in DP0 and then wanted DP0 for something else before it had read it, so it walked whatever it last pointed at and reported that it could find no room. sbfsStreamWrite kept the caller's block in DP3 across a find - DP3 being the pointer a return does not put back, which is exactly why the find uses it too. What went to the disk was whatever the scan last looked at. It goes in memory now, and the file is correct because every block says which block it is; a check on the length alone would have passed all three of these. Writing no longer finds the file for each block either. Nothing moves a file once it is made, so where it starts is settled when the temporary is created. That was not even slow - a scan stops the moment it matches - but it was a walk of the directory per block for an answer that cannot change, and it is 28 per cent of the cost of writing forty blocks. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
da91a36d92 |
D4: the machine makes directories too
mkdir and rmdir are the machine's own now, and a file goes where its path says rather than always in the root. A disk can be organised without the host tool touching it. Everything below the surface works in terms of a directory and a name rather than a path. sbfsWalkParent splits the last name off, walks the rest, and hands back the two - and the separator stays on the end of the head, which is what makes one rule cover every kind of path: "/x" leaves "/", which is the root; "x" leaves nothing, which is where the machine already is; and "A/x" leaves "A/", which is neither and needs no special case to say so. Saving works in those two as well, and had to. The careful order a save uses - make a temporary, write it, delete the original, rename the temporary - only works if the temporary is made in the SAME directory as the file, because the rename at the end changes a name and does not move anything. Renaming to a path naming a different directory is refused for that reason, rather than quietly being a lie the disk goes along with. Three things this cost, all found by running it: mkdir Apps/Deep made /Apps/Apps. The leaf was worked out into SbfsWanted and then the head was walked - and walking goes through sbfsPathNext, which puts every name it meets into SbfsWanted on the way past. The head's last name landed exactly where the leaf was. It has somewhere of its own now. rmdir took a directory with something still in it, which is the one failure the whole design is arranged to prevent. Looking for children clobbered DP2 and rebuilt it from the buffer and the entry count with the subtraction the wrong way round, so the pointer walked off the end of the block and found nothing. The comparison goes through a CALL now, like the two beside it, and DP2 comes back on the entry because a RET puts it there. SplitDisk's "in use but not reachable from the root" line is what caught it. Refusing a name longer than twenty two used to read the twenty third character of a shorter one, which is somebody else's string. It is measured now. Tests/agree.sh is new and is the gate this rung was for: the same disk built twice, once with SplitDisk and once with CosmOS, compared byte for byte. The two share no code and only a written specification, and every field one writes and the other only reads is checked there and nowhere else - which entry a thing lands in, which block, what a directory's unused fields hold, the version, the free count. It caught a wrong parent immediately when that was broken on purpose. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
36ce9f6ccf |
D3: the machine knows where it is
cd moves it, dir lists the directory it is in, and the prompt says which one - but only when that is not the root, so a machine nobody has moved about on looks exactly as it always did and every recorded test that never says "cd" keeps its recorded prompt. A path beginning with a separator is measured from the root and anything else from where the machine is, so a bare name means a file in the current directory. NO PROGRAM HAD TO BE TOLD: the working directory lives in sbfs.asm beside the thing that resolves paths, because it is what a relative path MEANS. Keeping it in the shell would have meant either handing it down on every call or pasting it onto the front of every name, and the second of those is how a name that is already absolute gets ruined. Nothing stores the path. The working directory is an entry index and two bytes, and the text on the prompt is built each time by walking the chain of parents upward, writing names from the end of a buffer towards the front - which is the order they arrive in, and saves reversing them afterwards. sbfsFind splits into a walk and a check. "cd /" and "cd .." both end at the root quite legitimately, and had no way to say so through a routine whose only word for the root was "missing". Typing a program's name now tries two places in order: where you are, then /Apps. The first makes a program you are working on the one that runs; the second lets Snake work from anywhere. A word already beginning with a separator has said where to look, so only that place is tried. osChangeDir exists so that "a program may move about, and the shell puts the working directory back" is a thing that can happen rather than a promise about nothing. Both halves of that were unfalsifiable without it: with no way for a program to move, removing the restore changed no test. Wander is the program that moves - it goes where it is told and reads a file there by a bare name - and with it on the disk, removing the restore fails. The remembered file is dropped whenever what a relative path means changes: a cd, a program calling osChangeDir, a program exiting. Removing all of them fails the test and removing any one of them does not, because today every path into that cache belongs to a program that exits. It is kept in all three because the cost is a call and the failure is a file's blocks being handed out under another file's name. The cwd fixture holds two files called notes.txt saying different things, and a Say.sbx in /A that is really hello. Two copies of one program, or two copies of one file, would have passed with the whole of this deleted. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
36a1b07b5b |
D2: the machine walks a path
sbfsFind takes a path where it used to take a name: names with '/' between them, walked from the root, with '.' and '..'. Each name is looked for among the entries whose parent is where the walk has got to. A bare name is a path of one name, so everything written before directories existed still works and still costs one walk of the directory. sbfsMount takes either version. On a version one disk every entry has zeroes where a parent goes and the walk starts at zero, so the comparison always agrees - which is how a flat disk reads correctly here with nothing done to it. PROGRAMS DID NOT HAVE TO BE TAUGHT ANY OF THIS. Resolution sits inside sbfsFind, below the services, so every osFile call keeps its signature and a path is simply a longer name. Type, More, Edit and the assembler gained subdirectories without a line changing in any of them. Four things this turned up, none of which was the path walk: load copied the path into a buffer sized for a NAME, so anything over 22 characters was cut short - and cut short into a path that often still resolved. "/Apps/Deep/../../Apps/Say.sbx" became "/Apps/Deep/../../Apps/" and reported that the program was a directory. That is the whole of what looked like a bug in '..', and it cost most of the time here. load on a directory SUCCEEDED. A directory has no blocks, so reading it reads nothing and leaves the staging area holding whatever was staged last - which, if that was a program, still says SBEX and still has a working entry address. It handed back the program before it. Refused outright now. delete and rename on a directory are refused, and save refuses one up front rather than failing at the rename and leaving a temporary behind. Deleting a directory frees an entry index, and a parent IS an index, so the next file created would take it and inherit the children. create writes the parent rather than leaving it zero by luck. It would be zero - delete wipes all thirty two bytes and a fresh entry never had any - but that is a fact about two other routines, and a file appearing inside a directory it was never put in is not a failure anybody would think to look for. dir marks directories and counts them apart from files, because at this point it was calling them files of no bytes. Two hazards written down in the design note turned out not to be real, and both were checked rather than argued about: The lookup cache holding 22 bytes of a longer path cannot hand back the wrong file - textSame wants both strings to end in the same place, so a cut down entry misses. It can never HIT either, though, so every path longer than a name went to the disk every time; it holds a whole path now. The allocator stepping over directories changes nothing any test can see. A directory has no start as well as no blocks, so its bounds are nought to nought and no candidate begins before it ends. The four instructions stay, with a comment saying they are not load bearing today and why they are there anyway. makedisks.sh resolves its build path before it cds. Given a relative one it carried on and quietly built disks missing some of their files, which is how the tree fixture lost a file and sent me looking for a bug in '..'. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
4fd8bf7b3f |
Step a Data Pointer with INCD and DECD, not DPUP and DPDN by one
DPUP takes an immediate, so an offset of one is legal and does exactly the right thing. It is also three bytes where INCD is two, and reads as "offset the pointer up by one" where INCD reads as "step the pointer". 56 of them across 15 files: the system, the assembler, the editor, and eight test programs. CosmOS is 9,564 bytes to 9,537, the native assembler 11,648 to 11,635, and every program in the repository together 49 bytes lighter. The worst offender was numbers.asm, written this week, where every sixteen bit helper reaches the low byte and comes back the long way round. It is the file every other part of the assembler includes, so it is the first thing anybody reads when they go looking - and it was teaching them the long way. Pattern matched off sbfs.asm rather than off the instruction table I had just embedded in two programs. THIS IS NOT TWO WAYS TO DO ONE THING. DPUP takes an arbitrary number, so one is inevitably among them; INCD earns its place by making the common case a byte cheaper. The overlap is structural and the choice is a usage question, which is a linter's job rather than an ISA's - "DPUP.n 0d01: INCD.n does this in a byte less" is a mechanical rule with no judgement in it. Nothing needed re-recording, which was not a foregone conclusion: cosmosBreak prints the system addresses the registers happened to hold, and they did not move. Both assemblers still produce identical bytes and CosmOS still builds itself to a fixed point. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
3d2ab34229 |
Streaming: read a file bigger than the machine's memory
osFileRead hands over a whole file, which settles anything under 64K and settles nothing above it. CosmOS's own source is above it - the sources together are 104K against 64K of Data Memory - so a machine that is going to assemble itself needs another way to ask. osFileInfo (0d26) says how many blocks a file occupies. osFileBlock (0d27) hands over one of them and says how many of its bytes belong to the file. Between them a program reads a file of any size through a buffer of 256. Blocks rather than bytes from osFileInfo is forced, not chosen: a file on a sixteen megabyte disk is up to twenty four bits long and a pointer holds sixteen. osFileBlock's count answers in DP3 for the same kind of reason - a whole block is 256 bytes, which does not fit in a register, and a count that reported it as zero would make every reader special-case the end. Nothing is kept open. Every call names the file, so there is no handle to leak and nothing left behind by a program that stops halfway. Taken at its word that means searching the directory once per block, so the system remembers where the last file it was asked about lives; every path that can change what a name means calls fileForget, including the shell's own delete and rename, which do not go through the services. Correctness never depends on the cache - a cache thrown away is indistinguishable from one never filled. Measured on a 329 block file: 7% of the run saved when the file is the first directory entry, 11% when it is the sixteenth. These two say WHY when the answer is no, which the others do not. Elsewhere the only useful response to a failure is to give up, so one value suffices. These are asked questions, and running off the end is how a reader learns it has finished, so it gets an answer of its own: 1 no disk, 2 no such file, 3 past the end, 4 the disk refused. Apps/Stream.asm reads an 84,000 byte file through 256 bytes. The check that matters is the second one: a small file read BOTH ways - whole with osFileRead and streamed - with the two checksums compared, so streaming is measured against the path already known to work rather than against a number someone wrote down. The checksum is Fletcher's rather than a sum, because a sum is the same whatever order the bytes arrived in and the order is exactly what streaming has to get right. Both checksums were also confirmed against the same arithmetic run on the host. The rest of the test is the cache: two files read alternately catch a memory that missed the name changing, and a rename catches one that missed the file moving - and that one would otherwise pass, since the blocks are still there holding the same bytes. The test file is generated rather than taken from the repository. The CosmOS sources would be a truer picture and would move the recorded checksum every time a line of CosmOS was edited, putting a real difference in a crowd of meaningless ones - the same trap the cycle counts used to set. cosmosBreak's recorded output moves by two bytes in two pointers: SbfsIndex added two bytes to the filesystem's data and Break prints the system addresses the registers happened to hold. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
301716e869 |
sbfs: give sbfsMatchEntry a counter of its own
sbfsFind counts a block's eight entries in SbfsCount and calls sbfsMatchEntry for each one, and sbfsMatchEntry used the same variable for its own twenty two byte comparison. A name differing at its first byte returned without decrementing, leaving 22 in the entry counter, so the search then walked twenty two entries through a buffer holding eight: off the end of it, into whatever data happened to follow, matching against rubbish and reporting a file that is not there as found. It had always been there. What decided whether it looked like it worked was the bytes after SbfsBuffer, so it stayed hidden until unrelated data was added and changed them. It showed up as "dir" followed by any failed "load" reporting that the file could not be read rather than that it does not exist. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Anachronaut
|
e3100b4718 | Fixed assembler bug that caused crash on IR array resize. Added line editor app. | ||
|
Anachronaut
|
91c9d49d1b | CosmOS pre-alpha and launchable application versions of old programs. |