b83ba5bf7a1060491a17ce9572c5d5c7f87c16fa
6
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  AnachronautandClaude Opus 5
|
d9ebc76cf5 |
A script is given words, and keeps them
"do build.sh cosmos.asm" looked for a file called "build.sh cosmos.asm", because scriptOpen copied the whole rest of the line into the name. So a script could be told nothing, and a launcher - a script whose entire job is to hand on what it was told - could not exist. Now the name is cut off the front and what follows is kept whole. $1 to $9 are the words of it, walked out on demand, and $args is all of them. Nothing is stored per parameter, so there is no limit on how many a script may be handed and no second number to keep in step. Both ways of starting a script pass them on: "do" and typing the name. A word that was not given is an error that stops the script, like every other name this shell does not know. Expanding it to nothing would let a command run with an argument missing and then report success, which is what stop-on-failure exists to prevent. $args is always set inside a script, empty if it was given nothing, so "if same $args" can be asked. ---- And the count that describes the block was already wrong ---- Found while adding a field to it. The state one script keeps for another is saved by a single copy of a fixed number of bytes, and that number was 71 against a block of 77: six bytes of line position had been added in the middle of it years after the count was written. So the tail of every saved script was never saved, and #quiet in a helper stayed behind in the script that called it - the opposite of what this file's own comment promises and the README documents. The unsaved line position turned out not to matter, because a loop keeps its own copy in the block record. Nothing said so. Three numbers describe this block and all three now say so in a comment, and cosmosScriptNest ends on a helper that goes quiet and a caller that must not stay that way. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
06af7e7fbb |
Reading a script must not move the person who started it
A script is fetched a block at a time while its lines run, and its name is resolved afresh for every block. A name with a drive in front of it moves the machine to that drive on the way past - sbfsWalk calls sbfsUse - so a script found in the system's place on drive 0, started by somebody standing on a disk of their own, ran its lines on the system disk. Always possible with "do 0:/Apps/setup.sh", and reachable by typing a name now that the search finds scripts the same three places it finds programs. The drive is kept across each fetch and put back after it, at both places a script's name is resolved. The test has to work for it. A script that fits in one block is read entirely while it is being opened, and the opening was never the hard part; and the keep in scriptFill cannot be broken on its own, because scriptOpen has already written the variable down. So the script on the disk crosses two block boundaries and moves itself between them: what it says about where it is standing is 1 before the move and 0 after. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
2abc8281df |
Loops, and the scripting language is a language
while and for. Both only mean anything in a script, because a loop goes back to the line that opened it and a prompt has no line to go back to - and both say so rather than doing something surprising. THE SCRIPT READER KEEPS THE POSITION OF EVERY LINE before reading it, which is what makes any of this possible: by the time a line has been read the reader is past it, and a line is not a fixed size to subtract. Three words per line, and the block is read again on the way back so the pointer into it means what it meant - the same thing nesting one script inside another already did, for a different reason. THE TWO LOOPS END DIFFERENTLY, and that is the design rather than an accident. A while is taken away at its end and its own line asks the question again, so nothing has to be remembered. A for is not: how many words it has used is kept in the block, and its line reads itself again and counts one more off the front. That is a byte in a block instead of a copy of the word list in every one of them. Blocks grew from a byte to a record of sixteen - state, kind, words used, and where the line that opened it was - and sixteen because A and B are a shift register, so four rotations turn a block number into its offset. The history and the variables are addressed the same way for the same reason. Nested loops, an if inside a loop, a loop inside a branch nobody takes, and a for with no words: the last two run no times rather than once, which is the case worth having a test for. Three things found by running it: textSame asks whether two WHOLE strings are the same, so "in red green blue" is not "in". The word has to be split off before it is compared. A for typed at a prompt complained about while, because both arrive at the same place. One message that names neither is better than one that names the wrong one. And docs.sh caught a naming convention nobody had written down: it recognises a packed name by its label ending in "Name", so ForName2 was silently not counted. It failed the right way round - saying the run was shorter than the count claims rather than passing - but the convention now lives where the names are and not only in the checker. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
553882d28d |
Start CosmOS with a script, and let a script hold its tongue
Three things scripts wanted, and they are one thing: a machine that can have a face. /System/Boot/startup.sh runs before anybody can type. Every way of reaching the prompt for the first time goes through it, including the one where there is no disk - in which case there is nothing to find and nothing is said. A MISSING one is ordinary and silent, because a clean install has none and a machine that complained every boot about a file nobody wrote would be teaching its owner to ignore it. One that is THERE and does not begin with #! is the other case entirely: somebody meant that to run. #quiet stops each line being echoed, #loud puts it back. The prompt and the echo go together, because together they are what makes a script look like typing, so a quiet script gets neither and what it prints is all that appears. A nested script inherits quiet - a build that asked for it meant its helpers too - and gets its own setting back when the helper returns. Anything else beginning with # is handed to the shell, which does not know it and stops the script, because a script that asked for something this shell cannot do should not carry on as though it had been given it. clear empties the screen, which the console has been able to do since before there was a screen to do it on. THE PROMPT IS NOW SAID BY WHOEVER SUPPLIES THE LINE. It used to be said at the top of the loop, which is a decision made before the line is read and an answer not known until after - and it was wrong at both ends. #quiet is itself a line, so its prompt went out before anything knew to stay silent; and the line after a quiet script's last one comes from the console, having already been denied one. Off by exactly one line in opposite directions. A first attempt at this remembered whether the prompt had been skipped, which worked and was a flag standing in for a structure. The monitor's assembler prints a prompt of its own, so it reads through shellReadRaw, which is the same source without one. One admission. Handing the console its prompt back when a quiet script ended was a real fix when I wrote it and stopped being one an hour later, because the restructure above means the console's own path prompts whatever the flag holds. The comment claimed it fixed something. Breaking it on purpose changed nothing, which is how that was found, and it is now a comment saying so instead of a line pretending to work. The startup fixture ends QUIET on purpose: nothing puts the flag back when the outermost script finishes, so a script ending #loud would have tested the easy half. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
c28826df77 |
Let a script run a script, four deep
A build script calling a setup script is the first thing anybody tries. What is saved when one script starts another is A POSITION AND NOT A BUFFER: the name, which block comes next, how many are left, and where in the block it had got to. Seventy bytes, and they sit next to each other in the data segment on purpose so that saving them is one copy. The block itself is read again on the way back, which costs one disk read per return and saves 257 bytes a level - the inner script reads its own block into the single buffer there is, so coming back means fetching the outer one's block again and landing on the byte it left. The slot is reached by stepping rather than by multiplying, because this machine has no multiply and the depth is never more than three steps. Four levels. Deep enough for a script calling a script that calls a helper, shallow enough that a script running itself says so rather than filling memory. A line that fails now stops every level and not just the innermost, because a build whose helper failed should not carry on in its caller. The caller's place is saved BEFORE the new file is looked at, and put back on every way out that is not success. Opening writes the name into the live state in order to ask the disk about it, so by the time "there is no such file" is known, the caller's place has already been overwritten - a failed 'do' inside a script would otherwise leave the script that ran it reading from a name it never chose. The test resumes in the outer script's SECOND block, which is the case the whole design turns on and the one an ordinary nesting test would miss. Breaking the re-read, the save, or the limit each fails it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
2466d79d9c |
Let the shell run a file of commands
'do <file>' runs the lines in a file as though they had been typed. The
only thing a script changes is where the next line comes from: everything
below shellReadLine - splitting the line, matching it, loading a program -
cannot tell the difference and does not have to.
What makes a file a script is '#!' on the front of it, not its name and not
a flag in its entry. The rule this filesystem keeps is that an entry holds
only what the content cannot say about itself, and a script can say what it
is; the loader already refuses anything that is not SBEX, so the two kinds
of runnable file turn each other away without either knowing about the
other. It is also the deferred half of the file-typing design, which said
to wait for a second kind of runnable thing before building any of it. This
is that second kind.
'#' is a directive and ';' is a comment, as in SplitBit assembly - one rule
across the machine rather than two dialects. Not Unix's convention: there
'#!' really is a comment that only the kernel reads, while here the shell
requires it and refuses the file without it, so calling it a comment would
be a lie about what it does.
A script stops at the first line that does not work, which is what the
LineFailed groundwork was for. Comments and blank lines are dropped by the
reader rather than by the dispatch, so they are not echoed either. A script
running out hands back to the console rather than ending the shell, because
running out of file and running out of typing are not the same thing. The
interactive assembler reads through the same path, so a script can contain
a block of assembly.
Three things this cost that were not obvious:
- RET puts A and B back, so a routine cannot answer in them. scriptByte
returning the character in A assembled, ran, and handed the caller its
own A back every time. It answers in memory now.
- A last line with no newline is still a line. Text files do not reliably
end with one and an editor eating it is a bad way to find out a command
did not run.
- Not LastStatus. See the commit before this one.
Six checks in three tests, two of which are about byte positions rather
than behaviour - a command lying across the boundary between two blocks,
and that missing newline - so their fixtures are generated rather than
committed, where an editor cannot helpfully repair them.
Nesting is not in yet: a script cannot run a script. That wants a stack of
positions rather than the one the reader keeps.
Also derives native.sh's self-hosting source list from cosmos.asm's own
#Include lines. It was a hand written list and went stale the moment
script.asm existed - the fourth time a list beside a thing has drifted from
the thing - so it now asks the thing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|