d6feddd1b600a904f739117ae09000a5c37e62e9
7
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  AnachronautandClaude Opus 5
|
310804e267 |
Give Snake back the speed its comment promised, and present in step with the display
Two things, one certain and one likely. THE CERTAIN ONE IS NOT THE WINDOW'S FAULT. Snake's pause loop said "at the emulated rate this is about an eighth of a second", and it was, when a cycle was one instruction. A cycle became one memory access, every loop in the machine got dearer, and this one silently doubled: the game has been running at half the speed it documents ever since, in a terminal as much as in a window. Measured rather than guessed - the inner loop is a DECA and a BNA, one byte and three, so four cycles a turn, and a whole run went from 3,848,610 cycles to 1,920,504 when the outer count came down from 256 to 122. Almost exactly half, which is what the arithmetic said it would be. That is the cost model change reaching a program nobody thought to re-measure. Worth looking for others: any loop tuned by eye before that change is running at half its intended speed. THE LIKELY ONE is the frame limiter. Without the vsync hint, Raylib sleeps towards sixty frames a second on its own clock, which beats against a display refreshing on its own - frames shown twice or skipped, and the machine handed an uneven number of cycles each time, since it takes its budget from the wall clock. The hint puts presentation in step with the screen. SetTargetFPS stays for a driver that ignores it. Snake is one byte bigger, because RSTB became INIB. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
bdb2d0d8e6 |
Keep a key until it is asked for
Input worked at the shell and not in Snake, and that split is the whole diagnosis: the shell blocks on a read, Snake polls the READY bit. Only the polling path was broken. RAYLIB CLEARS ITS CHARACTER QUEUE ON EVERY POLL, and a poll happens inside EndDrawing, so a key survives exactly one frame unless something takes it in that frame. The window presents sixty times a second and Snake looks about ten, so five keys in six were thrown away by the next present before the game ever glanced at them. A blocking read presented and then looked immediately, which is why the shell never noticed. The window now keeps its own queue, drained from Raylib at every present and emptied only when the console actually takes a byte. That is what this machine already promises about its console, and Snake's own comment is the specification: "the console keeps the next key until it is asked for, so a key pressed while the snake was moving is still there next frame". The hook was not honouring it. Asking the queue first also makes the two questions the same question. A poll takes whatever is waiting and returns at once, and a blocking read takes whatever is waiting, then presents a frame and looks again - so neither path can see a key the other would have missed. The queue drops its oldest when it fills, so somebody leaning on the keyboard while a program ignores it cannot push out what they typed most recently. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
556a14b288 |
Teach the console the sequences the corpus already speaks, and let the status port see the window
Three things Snake found the moment somebody ran it in a window, and all three are the same kind of mistake: the console grew a screen and kept asking the terminal. IT COULD NOT CLEAR THE SCREEN. Every program here that moves a cursor does it with ANSI escapes, because until there was a screen the thing on the other end was somebody's terminal. The controller drew "[2J" as three letters and left the board underneath. It now parses them, which is what a video terminal did - a VT100 is exactly this. The whole corpus uses two, ESC[2J and ESC[H, and the general shape is recognised so anything else is swallowed rather than drawn: a sequence nobody implemented should leave no marks. Cursor positioning is in too, since it is the same parse and one line more. IT DID NOT SEE KEYS FROM THE WINDOW, but did when the terminal behind it was focused, which is the whole diagnosis in one sentence. Snake polls the READY bit and never blocks, and consoleFetch - what the status port asks - was polling standard input regardless of whether a front end had installed a hook. So a window's keys were invisible to every program that looks before it reads, and a keystroke aimed at the terminal would be picked up instead. The hook now takes a question. Zero is the status port looking, and must not present or sleep: a program polling in a loop would otherwise be charged a frame for every glance. One is the data port blocking, where presenting is exactly right, because a machine waiting for a key is still a machine somebody is looking at. One value for both would have made either polling ruinous or waiting dead. AND IT RAN SLOWLY, which was the same bug wearing a hat: a game that never receives a steering key is a game that only ever goes one way. Six more checks in Tests/video.sh, to 32: that ESC[2J clears, that ESC[H goes to the corner without disturbing what is drawn, that ESC[3;5H counts rows and columns from one, and that an unknown sequence is swallowed and leaves nothing behind. The hook itself is still the one thing here the suite cannot reach - it exists only when there is a window, and this host has no display. It was found by a person playing Snake, which is where the Test Manual says these go on being found. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
6f8ad42277 |
Fill the window, let it be resized, and make black black
Three things a person looking at a real screen found in five minutes, none of which the headless tests could have seen. THE PICTURE FILLED A QUARTER OF THE WINDOW. The window opened at the largest screen the device can make, doubled, and then drew a 320 by 200 mode at that same doubling - so three quarters of it was bezel. It now takes the largest whole-number scale that fits: the two modes are exactly a factor of two apart and the window opens at twice the larger, so both fill it exactly, at four and at two. Changing mode changes how sharp the screen is rather than how big it is. Whole numbers on purpose. A 320 by 200 picture stretched by 2.7 has some rows twice as tall as their neighbours, which on eight pixel glyphs is the difference between text and mush. THE WINDOW WOULD NOT RESIZE. It does now, and the picture rescales to whatever it becomes, still in whole pixels and still centred. How big somebody wants a screen is not the machine's business. AND BLACK WAS NOT BLACK. Both the paper and the bezel were tinted towards green, on the theory that a phosphor never was neutral. On a real screen that reads as a fault rather than as character: a background that is nearly black looks like a background that failed to be black. Paper is black now and ink is a neutral grey, because a default should be the unsurprising thing - anything with a point of view about colour is 254 palette entries away and belongs to a program. The bezel is a clearly lighter grey, so what is left over when the window's shape does not match the picture's looks like a bezel rather than like more screen. The two checks that name the waking colours name the new ones. That they had to change is the check working: they say what they depend on rather than assuming it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
773b0f8add |
Put CosmOS on the screen without changing a line of it
The console is now a display controller as well as a port: it owns a font, keeps a cursor, handles newline, carriage return, backspace and wrapping, and scrolls. That is an ordinary kind of chip - it is what a video terminal's character generator did - and it is the reason this rung needed no changes to CosmOS at all. CosmOS already writes bytes to port 0x00. It writes to BOTH the screen and standard output, which is deliberate. A machine with a screen and a serial line is an ordinary machine, the emulator's standard output is that serial line, and one console drives both. It is also what keeps all 165 recorded results passing under Voyager, and what makes --screen work on the plain SplitBit: there is one console and it drives everything it has. Scrolling moves the video device's origin and no memory. The row arriving at the bottom is cleared because the map is a ring and it holds what was there 128 rows ago; the rows going off the top are not, and that is a hundred rows of scrollback nothing had to keep. The test reads the register back rather than looking at the screen, because a console blitting rows instead would look identical and cost twelve percent of a frame for every line printed. The font is vendored from Hatchet-GPU with a note saying where it came from, since that repository is not part of this one. 135 glyphs in ASCII order, which is the thing that makes it worth keeping - PETSCII's whole inconvenience was that its order was not ASCII's, so a machine using it needed a translation table in front of every string. Here the machine subtracts 32. It is stored one bit a pixel and expanded into tile memory at reset: 1,088 bytes against 16 kilobytes. Voyager gets a keyboard. A window has no standard input, and a machine blocking on it inside a frame would stop drawing and stop answering, so a front end with a window installs a hook that the console calls while it has nothing: it keeps the window alive and hands back a key. The hook has to tell "nobody has typed yet", which happens sixty times a second, apart from "the window has gone", which is the end of input - one value for both would have made the first keystroke look like a closed machine. In line mode the console echoes what it is given, because there is no terminal behind a window to do it and that was always the terminal's job. Tests/video.sh grew from 14 checks to 26, half of them about the console rather than the device: those programs ask the video device for nothing and write bytes to port 0x00 like every SplitBit program always has. Verified by breaking two things - removing the scroll failed exactly the two checks about scrolling, and removing the cursor advance failed exactly the three that depend on it. Two video checks had quietly depended on palette entry 0 being black, which stopped being true the moment a machine woke up able to show text. They now set what they are about to look at, and a new check pins the waking state itself. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
83623a3df3 |
Give the Voyager a screen
A tile engine on ports 0x30 to 0x3F, bringing one bank of video memory registered the way the disk's buffer is. The CPU writes cell indices and the device turns them into pixels, which is the whole reason a screen is affordable at a megahertz: a frame is 16,667 cycles, a full 320 by 200 picture is 64,000 bytes, and a 40 by 25 map is 2,000. A program that changes two cells writes four bytes. The cost of a screen becomes the number of cells that changed rather than the number of pixels on it. Which makes colour depth free, so the tiles are eight bits: an 8 by 8 cell is 64 pixels and each picks independently out of 256 colours, with no per-cell limit of the kind that made a Spectrum two and C64 multicolour four. The low nibble of a cell's attribute is ADDED to every index in its tile, sixteen at a time, so a tile drawn in 0 to 15 appears in any of sixteen schemes without a second copy in tile memory - and a tile wanting all 256 leaves the nibble at zero and gets them. Neither use costs the other anything. Two decisions are arithmetic rather than taste, and both come from the machine having no multiply. A map row is a page whether the mode fills it or not, so a cell address is the row number as the high byte and the doubled column as the low byte with no arithmetic at all; otherwise every cursor move on a 40 column screen would cost a row-times-40 in software. And a palette entry is four bytes rather than three, so entry n is at n times four, a shift. THE MAP IS A RING and the Scroll register says which of its 128 rows is on top. Scrolling moves a register and no memory: blitting a 40 by 25 screen up one line is 1,920 bytes inside one bank, which is twelve percent of a frame even with the controller widened, and a program printing one page would spend six frames shuffling memory. It is now one port write - and the rows that scrolled off are still there, which is where a terminal gets scrollback it never had. The device is part of the machine rather than part of the window. It renders into a buffer that is a pure function of video memory, so the same program draws the same picture with nobody watching; Voyager puts that buffer on the glass and decides nothing. Both binaries take --screen, which saves a PPM when the machine stops, and that is what makes a screen checkable on a host with no display at all. Tests/video.sh checks fourteen named behaviours rather than comparing a recorded image, because a recorded image would say "something changed" and leave which of the palette, the tile, the attribute, the map or the scroll register broke to be found by hand. Verified by breaking three things in turn: the additive nibble failed exactly one check, the scroll origin exactly two, and moving every cell one pixel sideways exactly the four about placement. Tests/docs.sh could not count past nine, which is how a suite of ten scripts reported itself as wrong for the wrong reason. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
e3ef25e3b3 |
Split the machine from its front end, and add Voyager
The Segan Voyager is the same SplitBit with a screen and a speaker instead of a terminal, and this is the rung that makes there be two of them at all. Everything that is actually the machine - the CPU, the controller, the devices, the run loop, the reporting - moves to machine.c, and each front end brings one file of its own. emulator.c is now sixty lines of argument handling and a three line loop. The machine runs in SLICES rather than to completion, because that is the cut a window needs: run a slice, present a frame, run another. A terminal runs slices until the machine stops. Both loops are three lines, which is why the cut is there rather than anywhere else. At this stage Voyager's window is empty. There is no video device yet and inventing a temporary way to draw would mean building something to throw away. PLAIN MAKE STILL WORKS WITH NO GRAPHICS LIBRARY. Raylib is probed by compiling and linking against it rather than by looking for a file, because a header with no library behind it passes a file check and then fails at link time. Where it is missing, make says so once and builds everything else - the machine, the assembler, the disk tool, the linter and the whole suite. A project about a small understandable CPU should not need OpenGL to run its tests. That nearly broke here: make strict globs Source/Emulator/*.c, so it would have tried to compile voyager.c and failed on precisely the machines the split exists to support, and this machine has Raylib so nothing would have caught it. Tests/voyager.sh runs the WHOLE MANIFEST through Voyager and holds it to the recorded results SplitBit is held to. Not that the two look alike: that one satisfies every recording the other does, byte for byte, exit status included. It reuses run.sh, which now takes the machine from SPLITBIT_EMULATOR, rather than keeping a second copy of the runner that would drift. Voyager not being built is not a failure - it says so and passes. Verified both ways. Made Voyager print one extra line, and 114 of 165 failed: exactly the tests that run the emulator, with the 51 assemble-only and xfail cases correctly untouched. Removed the binary, and the script skipped. Built with HAVE_RAYLIB=no, and everything else still built and checked clean. --headless is taken out of the arguments in voyager.c rather than in the shared parser, which should not learn about a window only one binary has. It exists so the suite can run this binary at all: a front end that could only be exercised by a person looking at it would be a front end nothing checks. loadFile takes a const char * now, which it always should have. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |