eaeb4731768886efe4918f9d6f6613e59ded1cb6
5
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  AnachronautandClaude Opus 5
|
afda6ca83b |
Finishing says nothing, which is what finishing looks like
The shell printed "finished" every time a program gave the machine back. That made sense when starting a program and getting the machine back was most of what the machine did and the prompt was the only other thing on the screen. Under a listing, between two commands, it is noise. And it was printed whatever the program made of it, so a program that had just explained what went wrong was answered with the word "finished" - "there is no such directory: nowhere" and then, immediately, "finished". The prompt coming back is what says a program is over. It is the same argument osLastStatus is made of: a program that failed has already said so in words, and anything the shell adds beside that is the shell talking over it. A program that FAULTED still says so, because the fault screen printed in red above and a program that is gone should not look like one that ended. A NEWLINE ONLY IF ONE IS WANTED. A program that stopped part way along a line would leave the prompt sitting in the middle of its last output, which the word used to prevent by accident. The console knows which column the cursor is in, so the shell asks - where a blank line printed every time would be right about half of the time, and an empty directory listed with ls would be followed by a blank line for no reason. Fifty nine recorded sessions lose the word. Two of them move a cursor up a row with it, which is the same fact seen from the screen. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
323d7a0330 |
A listing says what is left of the disk, and what will fit
dir said what was there and nothing about what was left. SplitDisk has printed the free figure since it was written, so the machine's own listing was the poorer of the two implementations at describing the same disk. 43 files, 3 directories 46 of 64 entries, 1893 blocks free Entries first, because they are the ceiling nobody notices until they hit it: a disk of small files runs out of directory slots long before it runs out of blocks. COUNTED RATHER THAN ASKED. The superblock keeps a free count and this file calls it "a note rather than the truth" in three places. sbfsSpace reads the whole directory table instead, which costs a read per directory block and is the answer rather than a guess. SplitDisk goes on reading the note and saying when it is stale, which is the right place for that check - the host tool is what you audit a disk with. ---- And it is a fact about the disk, not about where you are ---- The first version added the blocks up as the LISTING walked past them, which cost no extra read and was wrong: that walk stops only on entries in the working directory, so the same disk came out as 1,996 blocks free from the root and 2,025 from /Apps. Comparing against SplitDisk is what said so, which is what having two implementations is for. ---- The longest run, which is what decides whether a file fits ---- 4 of 16 entries, 37 blocks free the longest run is 25 Files are laid down contiguously, so the free total does not say whether a file will fit. Both implementations learn it, from one specification. Said only when it differs from the free total. Deleting is what fragments a contiguous store, and a disk that has only been appended to has one gap at the end - so on a healthy disk this is silent, and a line that appears only when something is wrong is a line somebody reads. There is no sort on this machine and the entries are in no order, so a candidate walks the disk: each pass finds the used extent nearest at or after it, and anything the candidate stands inside pushes it to the far end and starts the pass again. The same trick allocating uses. So it costs a pass per gap rather than per file - nearly nothing on a disk with one gap, more the more fragmented the disk is, which is the right way round. holes.img is six files with the second and fourth deleted, because no other disk here can show any of this: none of them has ever had anything deleted from it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
736037462e |
The shell edits the line it is given
Three different things used to do this job, and which one you got depended on where the machine was running. On a terminal the host held the line and did the echoing and the backspacing; behind a window the console's own gatherer did it; from a file nothing did it at all. One job, three implementations, none of them in the system - which is why there was no way to move about in a line and nowhere for a history to live. So editLine does it. Key mode while a line is being read and line mode straight after, so nothing else in the system and no program calling osReadLine notices anything changed. Left and Right, Home and End, Backspace for the character before the cursor and Delete for the one under it, and anything typed goes in where the cursor is with the rest of the line moving along. Ctrl-D means the end of input again, on an empty line, because that was a thing the terminal did while it was holding the line and it is not holding it now. Same trade as the echoing. MOST KEYSTROKES DRAW NOTHING BUT THEMSELVES. A character typed at the end of a line needs no cursor moved: printing it is the whole change, and a backspace there is three ordinary bytes. That matters beyond speed - moving the cursor by hand is what a terminal is TOLD about, in an escape sequence, so redrawing on every keypress would fill every recorded transcript in this suite with them. The line is only reprinted when something happened in the middle of it. Where the line STARTS is worked out backwards from where printing ended, rather than trusted from what was remembered. That is what makes it survive the screen scrolling: a line printed on the bottom row moves everything up by one, and a remembered row would be one too low from then on. The command line holds 127 characters, up from 63. The limit started to be felt the moment a line could be moved about in. 58 recordings changed, and every one of them by the echo. THE PROOF IS NOT A HEURISTIC: a CosmOS built with the echo silenced reproduces 187 of the 188 recordings byte for byte. The one exception is cosmosTyped, the backspace test, where the rub-out marks now come from the shell instead of from the console's gatherer - same marks, different author. cosmosEditKeys is the new test, and every line in it is typed wrong and then corrected with a different key. Its last line is eighty six characters at a prompt in column two on an eighty column screen, so the line runs onto the row below and the shell has to find the start of something it can no longer see; breaking either half of that arithmetic fails it. Also: agree.sh looked for "> the same", anchored to a prompt that no longer precedes what a command prints. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
Anachronaut
|
87d819847e |
A program can say how it went
SWI osExit takes a status in A, and the shell keeps it. Fifty eight exits across twenty three programs now say deliberately whether they worked: 25 did what they were asked, 24 did not, 9 were asked wrongly. Compare is the exception and says so - one there means the files differ, which is a result rather than a failure, the way diff has always had it. IN A RATHER THAN Q, which is not a departure from the rule that a service answers in Q. This one takes an ARGUMENT, the way osPrintNumber takes A and B, and it never returns to answer anything. A is free precisely because a return would have put it back - and Q is the ALU's output, so a small number costs four instructions there against one in A. The shell does not print it. A program that failed has already said so in words and a number beside that is noise, so osLastStatus hands it back and Status is the program that shows it. That indirection is the point: the number exists for the thing that cannot read words. MARKING THE EXITS FOUND A DEFECT ON THE FIRST RUN. Type and More printed why they had failed and then fell through into the success exit, reporting that all was well. Nobody had noticed, because while the only reader was a person, the person could see both the complaint and the claim. Two smaller things. Snake sets the console to line mode and then exits with zero, and the linter flagged the second RSTA as redundant - an exit status and a console mode, equal by accident, which is the class that must never be collapsed. And the README still taught answering by writing into the frame, three months of habit that SRET replaced yesterday; that section is gone and the one describing SRET stands in its place. |
||
|
AnachronautandClaude Opus 5
|
a7d3e09d94 |
Refuse a streamed file that commits more than it reserved
osFileStart sets an extent aside and osFileWrite refuses a block index outside it, so writing off the end was already barred. Committing a larger size was not, and reaches the same neighbour by simply claiming it: a directory entry is the only record of what a file owns, so an entry claiming a block it was never given owns it, and so does whatever owned it before. Both files then look perfectly well formed. The free count went backwards past zero on the same path. Found by ChatGPT's review of the streaming work, in NOTES.md. I had bounded the index because writing off the end was the obvious way to reach a neighbour, and had not noticed that the other end of the same reservation was open. THE SIZE IS COMPARED, NOT THE ROOM IT TAKES UP. One block and a tail occupies exactly what two whole blocks occupy, so bounding the blocks alone would let a file reserve the first, commit the second, claim no block it was not given, and still report two hundred and forty six bytes that were never written to it - whatever the disk had there before. Checked before anything is touched, which is why the temporary is found twice. The old file is deleted a few lines down and a refusal after that point would have destroyed the thing it was protecting. AND IT CAUGHT A REAL ONE IMMEDIATELY. The assembler reserves the file plus room for its vectors, and asked for four bytes per vector DECLARED - which looks like a safe bound and is not, because a device is declared during the SECOND pass, in the line that implements it. A program with a device installs a vector that was not counted when the room was measured. CosmOS reserved 14,163 bytes and committed 14,167, writing four bytes past what it had been given on every build since S2. It landed inside the last block it owned, and would not have if the boundary had fallen four bytes earlier. It reserves against the vector table's LIMIT now, which cannot go stale whenever things are counted. Claim.asm is the program that tries it: reserve one block and a tail of ten, write them, then tell osFileDone the file came to two whole blocks. The refusal and the honest commit that follows are both recorded. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |