eb695a3f3bc8199ff5def4c466842f3839721f67
25
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  AnachronautandClaude Opus 5
|
ab72443b99 |
Give the screen back: osTakeScreen, and the RAM disk earns its keep
A program that takes the whole screen leaves the shell a blank one, and
whatever was on it is gone. There was nowhere to put 48K of video memory on
a machine with 64K of Data Memory that CosmOS already lives in.
A DRIVE MADE OF MEMORY IS SOMEWHERE. The screen goes to a file on the
scratch drive - the first volatile drive found at boot - like any other
file, and comes back from handleExit alongside the vectors and console mode
already put back there. The filesystem does the allocating, so this
invented nothing: it is 196 pages of tiles, map and palette, with a block
on the front holding the cursor, the four scroll registers and the mode.
NOT AUTOMATIC, and that is the whole design. Saving on every program start
would be cheap enough; restoring on every exit would be wrong, because dir
and Files and Say print and stop and their output is the reason you ran
them. A program says it took the screen, and one that says nothing behaves
exactly as every program did before this existed.
It deleted thirty lines of Grid, and they were all wrong anyway: four
scroll registers put back by hand, the map filled with spaces, the cursor
sent home, palette bank 0 written out - and the other fifteen banks kept
Grid's colours, because there was nowhere to have kept the real ones. Grid
is 64 bytes smaller and gives back what was actually there.
The check compares the screen before against the screen after, CELL BY
CELL, and allows only the rows around the cursor to differ - found from
where the text ends rather than guessed at, because the first version
assumed the cursor was near the bottom of the screen and let three real
differences through.
Two things cost time and neither was the feature:
- An edit adding "SWI osTakeScreen" to Grid was in the same script as a
failing s.index, so the file was never written - and the COMMENT
describing the call did land, from a later edit. Grid documented a call
it did not make, and read as though it should have worked.
- docs.sh caught osTakeScreen having no row in the services table, which
is the check the service layer added for exactly this and the second
time it has earned itself.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
04f1ffabd4 |
A disk made of memory, brought up by whoever owns it
THE MACHINE SUPPLIES BLOCKS AND SAYS WHAT A DRIVE IS. It says nothing about filesystems, which is what leaves room for a system that would rather have its own - and is why the volatile bit is a fact about the hardware rather than a promise about SBFS. 0x26 what the selected drive is: bit 0, contents do not survive 0x27, 0x28 how many blocks it has --ram-disk N a drive of N blocks with memory behind it A drive of memory selects, reads, writes and has a size like any other, and a program cannot tell the difference except by how fast it was. The one thing it cannot work out for itself is that the contents are volatile, because an empty disk and a volatile disk look identical from outside. THAT BIT IS THE DIFFERENCE BETWEEN A DRIVE A SYSTEM MAY FORMAT ON SIGHT AND ONE IT MUST NOT. CosmOS formats a volatile drive it cannot read, because there was never anything on it to lose, and leaves every other unreadable drive alone - an unformatted floppy is not an invitation, it is a blank floppy. Removing that check formats somebody's blank disk, which is checked rather than asserted: cosmosBlankDisk boots with one and requires it to be refused. So CosmOS grew a format. The size comes from the drive rather than from a superblock, since a superblock states a size too and that is no use on a disk which has not got one yet. Sixteen directory blocks, 128 names, chosen rather than worked out: a scratch disk runs out of names long before room, and this machine cannot divide. The RAM disk is no faster on this emulator by default, and that is honest rather than disappointing: the emulated disk has no seek time unless asked for one. With --disk-cycles 10000 the same copy is 7.94M cycles against 8.70M, the difference being every write. run.sh takes "ram:2048" where an image name goes, which needs no removing between runs because there is nothing to remove. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
e4f4bae762 |
Work across two disks: copy between them, and run a program from one on
files from the other Two things anybody expects of a second disk, and each needed something different. COPYING NEEDED TWO THINGS TO REMEMBER A DRIVE. The write stream is the only thing here that lives across service calls, so it is the only thing whose drive can change underneath it: every osFileBlock names its source path again and goes back to the source drive, and then osFileWrite has to come home. It records the drive it was opened on and returns there. And the file lookup CACHE. It keeps the last path resolved so a reader walking a file does not re-walk the directory for every block - and skipping the walk skipped the drive the path named, so block one of a cross-drive copy read the source's block numbers off the DESTINATION disk. It only showed on files of more than one block, because a file of one is never looked up twice. One block worked and two did not, which is a suspicious enough shape to have suspected sooner. RUNNING A PROGRAM FROM ELSEWHERE NEEDED A THIRD PLACE TO LOOK, and two restorations. The shell tried where you are and /Apps on the disk you are on. It now tries /Apps on drive 0 as well, which is what makes the system's programs work from a disk of your own - one with your files on it and no system, which is most of the point of having a second disk. The drive goes back after the load, because by then the program is in memory and the blocks it came from mean nothing; and again when it exits, because a program that copies between disks moves the drive as its own paths need to and being left wherever it finished is not what was asked for. Copy 1:/a 0:/b now leaves you exactly where you were. The fixture disk grew an /Apps, because it kept its programs at the root and so could not exercise the third place at all. Two hours of the debugging above were spent on a stale disk image. The machine boots the system that is ON the image, so a rebuilt cosmos.bin means nothing until the image is rebuilt too - and the trace said my new code never ran, which was true. Third time this project has been misled by one. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
4cc6393f5b |
Name a drive in a path
"1:/notes", or "1:" on its own for wherever that drive already was. Done in sbfsWalk, which is where every path in the system arrives - eight callers between the shell, the config reader and the filesystem - so it works for anything that takes a path rather than for whichever commands somebody remembered to change. NAMING A DRIVE GOES THERE AND STAYS THERE. Switching for the length of one command and switching back reads better and cannot work: a path resolves to a start block and a length, and those mean nothing without the drive they were read from. A load that resolved on drive 1 and then read its blocks on drive 0 would read the right blocks of the wrong disk. A name beginning with a digit is still a name. The colon is the whole of what tells them apart, and /2things is on the fixture disk to keep it that way. Two bugs, and the second is the interesting one. SUB sets carry on a BORROW, so a character below '0' leaves it set - and the test for "not a digit" branched on clear. Every prefix was ignored. Then the leading-separator test reads the first character through DP0, which sbfsPathDrive could not move because RET puts DP0 back the way it found it. It advanced SbfsPathAt and DP0 still pointed at the digit, so every prefixed path was judged relative and walked from the named drive's working directory. IT ONLY SHOWED WHEN THAT DRIVE WAS STANDING SOMEWHERE OTHER THAN ITS ROOT, because a relative walk from the root is an absolute one - so "cd 1:/2things" worked from a fresh boot and failed after "cd 1:/notes". The test does it in that order for that reason. Copying between two disks is still not one command: each path resolves on its own drive and the drive stays where the last path left it. That wants Copy to change drives between blocks. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
5644c24113 |
CosmOS knows about all four drives
A mounted disk is EIGHT BYTES - where its directory starts, how many
blocks it is, how big the disk is, and where you are on it. They now sit
together in the data segment, and changing drives is one copy out and one
copy in. The other three thousand lines of filesystem go on reading the
same four names they always have and never learn there is more than one
disk, which is the whole reason this was affordable.
The version is not in the record. It is checked at mount and thrown away,
because a version one disk's zero parent already reads as "in the root".
Every drive is mounted at boot: the controller says how many are plugged
in and each is tried in turn. One with nothing in it, or a disk this
cannot read, is left unmounted rather than stopping the others, so a
machine with a good disk in drive 0 and a blank in drive 1 starts.
'drive' says which one, 'drive 1' goes to another, and the working
directory goes with it - where you are on a disk is part of which disk you
are on. A drive the machine has not got is refused, and refused
differently from one that is there with nothing readable in it.
Three things the assembly caught me on, all the same misunderstanding of
what survives a call:
- OR reads A and B, and the bit came back from sbfsDriveBit in Q, which
RET does not disturb - but RET does put A back. The mounted mask never
got set and drive 0 was reported unmountable.
- MVQA then RSTA throws away the copy it just made, so doubling a bit
doubled nothing. SHL does it in one instruction, because A and B are
one register to it.
- There is no move from A to B. INB reads a port straight into B, which
is what the drive count comparison wanted.
run.sh takes more than one image now, separated by a plus, since the
machine has four drives and a test that could only name one could not
check any of this.
The buffer note is forgotten on a drive change and that is DELIBERATELY
kept although nothing can currently reach it: only the file read-ahead
consults it, a directory scan does not, and finding a file requires a
scan which overwrites the note on the way past. Two disks were built with
the same file at the same block to try to catch it and the answer was
right either way. Three instructions to hold an invariant rather than a
story about a bug - and the comment says so instead of claiming a fix.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
5732a31b2e |
Stop the allocator starting the directory again for every file in its way
Placing one file on a disk with the source tree on it cost 9.4 million cycles. It costs 1.4 million now, and assembling colours.asm went from 13.9 to 6.0 seconds. sbfsAllocate gave up the moment it found anything in the candidate's way: it moved the candidate past that one entry and STARTED THE DIRECTORY AGAIN FROM THE FIRST BLOCK. With files laid down one after another that is a restart per file, and every restart reads directory blocks off the disk until it reaches the next thing in the way - which is further in each time. Placing one file among 183 of them cost thousands of block reads. The candidate moves along DURING the pass now, and the pass carries on from where it is, so entries later in the directory are tested against where the candidate has got to. On a disk that has been appended to - which is what a disk mostly is - one pass walks it past everything and a second confirms nothing is left. Two passes rather than one per file. IT IS STILL FIRST FIT, and Tests/agree.sh is what says so: the machine and SplitDisk build the same tree and the images still match byte for byte, which they could not if allocation had started choosing differently. The argument is that the candidate only ever moves past something that genuinely overlaps it, and when it does there is nowhere below to go - the entry in the way covers everything up to its end and begins before the candidate ends. The first attempt at this was slower than what it replaced, by three times. It finished the pass and jumped to the FURTHEST overlap, which sounds better and is worse: with files laid contiguously only one entry ever overlaps, so the old early exit was the fast path and reading the whole directory to find the one thing was pure loss. The number of passes was never the thing to fix - restarting them was. The boot slot in the test fixtures goes from 32 blocks to 40, which is what a shipped disk has. Stage two is 8,231 bytes and 32 blocks is 8,192: a fixture tighter than the thing it stands in for fails on a change the real disk would have taken, and says "the boot slot is too small" rather than what actually grew. WHAT THIS DOES NOT FIX is assembling CosmOS, and that is worth saying plainly. It takes 654 million cycles on the mirrored disk and 653 million on a flat test disk with a sixth as many files, so it is not a filesystem problem at all. Cycles per byte of source climb with the size of it - 1,383 for colours.asm, about 3,000 for Edit.asm, 6,290 for cosmos.asm - which says the native assembler is superlinear in what it reads. That is a separate thing to go and look at. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
Anachronaut
|
dc74149321 |
B4: the disk remembers whether the last start arrived
The loader marks the superblock before it hands over and the system clears the mark when it reaches its prompt, so a system that crashes on the way there leaves it set. The loader finding it still set next time is how a machine that will not start says so to the only thing in a position to do anything about it. Without that, pointing boot.cfg at something that dies before the shell is a machine that can never be told anything again - the shell is the only way to change the file, and the file is what stops the shell from starting. Three states rather than two, and the third is the one worth having: 0 settled the last start arrived; use the configuration 1 trying handed over, and nothing came back to say it got there 2 fell back a try failed and the fallback was used, until settled With only 0 and 1 the machine alternates for ever: fall back, reach a prompt, clear the mark, retry the broken system, crash, fall back. State 2 stops that. A system known not to start is not tried again until somebody says the situation has changed. REACHING THE PROMPT IS A DELIBERATE THRESHOLD. It is not a claim that the system works - a shell can be reached by something broken in every other way. It is the point where a person can type, which is exactly what the fallback exists to give back: anything wrong past there is fixable from the prompt and nothing wrong before it is fixable at all. The routines live in sbfs.asm because both the loader and the system read and write this byte, and two pieces of code with their own idea of where a byte lives is what this format has two implementations and a byte for byte comparison to avoid. And the trap this system documents in its own manual caught me anyway: the first version handed the state back in A, which CALL restores, so every read got whatever the caller happened to be holding. It comes back in memory now, and the comment says why. Three disks differing only in the state on them, so the tests read as three consecutive starts of one machine while none depends on another running. |
||
|
Anachronaut
|
9c144469b4 |
Take the SplitLint findings that are one operation, leave the rest
Twenty four more sites, and the interesting part is which ones were left alone. A rule emerged while reading them and it held all the way through: apply where the repetition is INSIDE one operation, skip where the author's own structure says it is a new thought, and never where two equal values mean different things. Taken: - Five registers reassigned to a value they already held, where both are the same quantity: two masks in one expression in Snake, two spaces printed by the monitor, both halves of block zero in waitTest, and a RSTA in Pour that the very next instruction overwrote. - Eighteen SETDs that reload a pointer inside one operation - a store back into the variable just read, or an INCD stepping to the second byte of a two byte value. Those read correctly without the reload. - sbfsNext, which branched to the label on the line below it. Left, with reasons that are the useful part of this: - Eight registers where the same number means two different things. CosmOS and the loader set A to 1 for a blit command and then to 1 again for a bank number; Asm compares a type against 3 and then a status against 3. Removing those couples one quantity to another that is equal by accident and would part company silently. - Ten RSTAs that open the RSTA/RSTB/CCF/ADD "return zero" block. The redundancy is what makes that idiom self contained; taking it out makes the return value depend on the line above. - Eleven SETDs that begin an arm of a comparison chain. Each arm loads, compares and branches, and they get reordered - the repetition is the reason a new arm can be dropped in anywhere. - Twenty five SETDs separated from their pointer by a blank line or a comment, which is the author saying a new thought starts here. - Two CCFs before arithmetic, which this codebase writes unconditionally. - Three redundant branches in test programs whose recorded output includes addresses, where three fewer bytes moves what the test demonstrates. Nine recorded outputs moved and every one is a size in a listing or, for Life, five more generations inside the same cycle budget. Behaviour is unchanged everywhere: cosmosSnake and cosmosEdit pass byte for byte while Snake loses eight bytes and Edit twelve. CosmOS is 10,902 bytes of program against 10,937, and the native assembler 12,173 against 12,183. The CosmOS README's size for Edit moved twice in one sitting, and this morning's check caught it both times - which it could not have done before that claim was reworded to name what it was about. |
||
|
Anachronaut
|
c216c83e12 |
The filesystem waits for the disk instead of asking it repeatedly
sbfsWaitDisk spun on the status port. Read ahead had already hidden about
three quarters of the latency, and what remained was still 11.5% of Type
over a 14K file on a ten thousand cycle disk - all of it memory traffic
spent finding out that nothing had happened yet.
It tests the port first and only waits if the disk is still busy, and that
order is the whole of what makes it safe: the disk raises its line when it
finishes, so a disk that finished in the gap between the test and the WAIT
has its line standing already and the WAIT does nothing rather than
sleeping through the answer. No handler and no vector - the shell keeps the
Interrupt Flag down, and a WAIT wakes on a line whether or not anybody
means to answer it.
Printing a 14K file, by where the cycles go:
cycles a block total bus waiting
0 922,570 922,570 0
2,000 946,474 922,702 23,772
10,000 1,042,474 922,702 119,772
The bus column stops moving. What the program costs in memory is now the
same whatever the disk does. On this emulator nothing observable changes;
on hardware it is a CPU standing out of the way of the memory controller
rather than competing with it for every one of those 119,772 cycles.
The first version cost 660 cycles more at latency zero because it read the
status port again on the way out. AND writes to Q and leaves A alone, so
the status was already there - which is what the original said in its own
comment, and what I stopped believing while rewriting around it.
|
||
|
Anachronaut
|
ce0f18f4ef |
Refuse a directory whose last entries cannot be named as a parent
A parent is an entry index PLUS ONE in two bytes, so entry 65535 has no parent number: adding one wraps to zero, and zero is the root. Eight entries to a block, so 8192 directory blocks reaches it and SplitDisk formatted that happily. It does not fail by refusing, which is why it was worth chasing rather than reasoning about. Reproduced on a disk built for it: mkdir /deep/child, with /deep at entry 65535, printed 'Made "/deep/child" as entry 0' and put child in the ROOT. Listing /deep then showed nothing, because the search is for a parent of 65536 and the entry carries zero - so the same mkdir succeeded again, and again, and five entries called /child piled up in the root. Duplicate names in one directory are the one thing rename refuses outright, on the grounds that a search answers with whichever it meets first and the rest can never be reached; this manufactured them one per attempt. 8191 blocks is the most, giving 65528 entries. Refused when formatting and again when reading, in both implementations, because a disk claiming more was made by something that never checked. On the machine only the high byte of the count has to be looked at: anything from 0x20 up is too many. Three checks, all of which fail with their guard removed. The machine's disk claims the size rather than having it, so the test image is 64 blocks that lie rather than sixteen megabytes that do not - mounting is refused at the geometry, which is read out of block 0. |
||
|
Anachronaut
|
ce8fb721fe |
Say a temporary is one in the entry, not in its name
Saving something that already exists writes a temporary, deletes the original and gives the temporary its name, so that nothing is lost if the writing fails. The temporary was told apart from a real file by being called sbfs.part or sbfs.out - and those are legal names. Starting a save deleted whatever answered to one as stale scratch, so saving anything at all in a directory destroyed your own file of that name there, silently. Flag bit 0x04 now says it. The property is not in the contents - the same bytes become the finished file the instant the rename lands - so it belongs in the entry, which is the thing the commit changes. sbfsCreateTempAt is the door temporaries come in by, the commit writes the flags flat along with the name, and cleanup wipes what it finds only if the entry says it is ours. Anything else stops the save instead. The bit is also the recovery. Both listings show an unfinished write rather than sizing it, because the size in the entry is the room that was asked for and not what was written: "<unfinished>" from dir, and a line from SplitDisk saying the blocks are held and a rename brings the data back. That was the gap in what the last commit documented - the data survived a crash and nothing would show you where it was. Four new agreement checks, three of which fail with the guards removed. The fourth needed rebuilding first: both tests started on one disk, and the first save ate the sbfs.part that was the second test's SOURCE, so the copy failed for want of a file, never opened a stream, and passed while reporting on nothing. A disk each. The fifth check forges the wreckage by setting the flag on a finished file, since nothing here can crash a save half way through. No version bump: a committed file never carries the bit, so a disk this writes is byte for byte the disk the old code wrote, which the whole-image comparisons confirm. Only the wreckage differs, and older code reads that as an ordinary file - which is what it did before. |
||
|
Anachronaut
|
9e2aa0122e |
Say what a safe save actually promises, and where it stops
Both sbfsSaveFile and sbfsStreamDone write a temporary, delete the original and rename the temporary onto its name, and the README explained why that order and not the obvious one. It never said what the resulting guarantee is, which invited the stronger reading: "safe save" sounds like it survives anything. It survives everything that goes wrong while it is running - no run long enough, no free blocks, a refused write, a name that turns out to be a directory, a writer that gives up - and in all of those the original is untouched. It does not survive the machine stopping, because the commit is two block writes with a gap between them: stop there and the old file is gone and the new one is still called sbfs.part. The bytes are all present and one rename by hand recovers them, but nothing does that on its own. Written down in the README beside the ordering it qualifies, and at both commit points in sbfs.asm, where a reader is when the question occurs to them. Closing the gap wants a journal or a second directory, which is a lot of disk for two writes; a boot-time consistency check is the cheaper answer if it ever matters, and it would want temporaries flagged in the entry rather than recognised by name. |
||
|
AnachronautandClaude Opus 5
|
db3d349da8 |
Read the next block while the program is busy with this one
A file is read front to back, so when something asks for a block, the one after it is almost certainly wanted next. sbfsReadOne asks the disk for it straight away and hands back the block that was wanted - so the transfer happens while the caller is busy, and the waiting is mostly over by the time it comes back. Printing a fourteen kilobyte file: 1,064,498 cycles at two thousand a block becomes 976,882, and 1,576,562 at ten thousand becomes 1,032,889. The second figure barely moves between those - seven per cent from an instant disk to a slow one, where without it the same change costs sixty eight. A machine that reads ahead stops caring very much how fast its disk is. NOT FOR DIRECTORY SEARCHES, and that was tried first and thrown away. A scan stops the moment it matches, so the block it would read ahead is one nobody will ever look at - a transfer to fetch and another wait to throw away. It was nineteen per cent SLOWER on a lookup at ten thousand cycles a block. Reading ahead is a bet that the next block is wanted, and a search is exactly the case that hopes it is not. The scan loop is untouched. Three per cent is what it costs when the disk is instant, which is the bookkeeping with nothing to hide behind it, and the default. The disk has one buffer, so the only way to know what is in it is to remember what was last asked for. Every read records that; a write clears it, because a write fills the buffer from memory and no read asked for what is in it. Getting that wrong would blit whatever happened to be there and call it the block somebody wanted. The read ahead is bounded by the file's own length, so reading the last block does not fetch whatever follows the file on the disk - which belongs to somebody else and would be paid for twice, once to fetch and once to discard. It cost one bug, and an instructive one: the next index was worked out by stepping SbfsIndex, which is the CALLER'S and is still wanted after the return - handleFileBlock compares it against the file's length to see whether this was the short last block. Every block reported the wrong number of bytes, and the output of Type skipped five lines in the middle. It has a place of its own now. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
d4cba36c5e |
Devices that take time, and a filesystem that waits for one
The disk's status has always had a bit meaning "still going", and the header beside it has always said to honour it. Nothing did, because nothing could: the host finished the transfer inside the instruction that asked for it, so the bit could never be seen up and asking about it was asking about something that cannot happen. --disk-cycles gives it a latency. The command is still checked at once, because a refusal is not work - a block that is not there fails before any head moves - but the transfer is remembered and done when the machine has run that far. Until then the buffer holds the block BEFORE this one. That last part is the point. A program that does not wait gets the wrong bytes rather than an error, which is the failure the bit exists to prevent and the one that would never have shown up. With a latency of two thousand, CosmOS could not even mount: sbfsMount reads block zero and looks straight at the buffer. deviceTick is the general shape rather than a disk feature. Called once per instruction with the machine's clock, it lets anything whose moment has come finish - which is what a display that refreshes, or a port that waits on the host, would want in exactly the same way. The filesystem watches the bit now, in one small routine reached with RCAL. That is not decoration: what it hands back is the settled status in A, and CALL puts A back the way it found it, so an ordinary call cannot carry the one thing this exists to carry. Two bytes of Stack rather than ten, in a routine that runs on every block the machine ever touches - the first place in the system where the new call is the right one rather than merely a cheaper one. The manifest takes a @N after a disk, the way it already takes :ro, so a test can ask for a slow one. cosmosSlowDisk lists a directory at two thousand cycles a block and gets the same listing as everything else, which is the whole assertion: a filesystem that did not wait would print nonsense rather than fail. Zero is the default and every other test runs at it. What waiting costs, on a directory heavy run: 229k cycles at zero, 275k at five hundred, 415k at two thousand, 1.16M at ten thousand. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
a7d3e09d94 |
Refuse a streamed file that commits more than it reserved
osFileStart sets an extent aside and osFileWrite refuses a block index outside it, so writing off the end was already barred. Committing a larger size was not, and reaches the same neighbour by simply claiming it: a directory entry is the only record of what a file owns, so an entry claiming a block it was never given owns it, and so does whatever owned it before. Both files then look perfectly well formed. The free count went backwards past zero on the same path. Found by ChatGPT's review of the streaming work, in NOTES.md. I had bounded the index because writing off the end was the obvious way to reach a neighbour, and had not noticed that the other end of the same reservation was open. THE SIZE IS COMPARED, NOT THE ROOM IT TAKES UP. One block and a tail occupies exactly what two whole blocks occupy, so bounding the blocks alone would let a file reserve the first, commit the second, claim no block it was not given, and still report two hundred and forty six bytes that were never written to it - whatever the disk had there before. Checked before anything is touched, which is why the temporary is found twice. The old file is deleted a few lines down and a refusal after that point would have destroyed the thing it was protecting. AND IT CAUGHT A REAL ONE IMMEDIATELY. The assembler reserves the file plus room for its vectors, and asked for four bytes per vector DECLARED - which looks like a safe bound and is not, because a device is declared during the SECOND pass, in the line that implements it. A program with a device installs a vector that was not counted when the room was measured. CosmOS reserved 14,163 bytes and committed 14,167, writing four bytes past what it had been given on every build since S2. It landed inside the last block it owned, and would not have if the boundary had fallen four bytes earlier. It reserves against the vector table's LIMIT now, which cannot go stale whenever things are counted. Claim.asm is the program that tries it: reserve one block and a tail of ten, write them, then tell osFileDone the file came to two whole blocks. The refusal and the honest commit that follows are both recorded. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
fb7b224bbb |
S2: the assembler writes the file as it makes it
The output image is gone. It was eighteen kilobytes and it is now one block of window, because the file was always produced in order and only ever needed to be written that way. Everything works in FILE OFFSETS now. A cursor is a two byte number counting from the front of the file, and since a block is two hundred and fifty six bytes, the block it lands in is the offset's high byte and the place within that block is its low one - so there is no division anywhere, and ImgWalk, ProgPut and DataPut needed no change but where they start. ONE WINDOW RATHER THAN THREE. The plan said three: one per segment, and a third for the block where the program ends and the data begins, which belongs to both. Fetching a block back instead makes all of that one case. The header is patched after every byte is out, the boundary block is written by both cursors, and both are simply revisits - a revisit is what fetching handles. osFileFetch is the service that allows it, and is the read side of the write. A run of bytes in one segment costs nothing extra; a switch between segments costs two block operations, and a source file has a few dozen switches and several thousand bytes. Two bugs, both a pointer meaning two things: putAt took the cursor to advance in DP2 and then wanted DP2 for the window's address. A call puts DP2 back the way it was AT THE CALL, so the step at the end moved whatever the last call had left there - the window walked off across memory while the cursor stood still. It goes in memory now, like the block did in S1, and for the same reason. The size the file is created at could not be right. How many vectors are actually installed is not known until the second pass has resolved their handlers, and by then the file must already exist to be written into - so Keys, which brings one vector, came out four bytes short. Teaching the first pass to count them meant teaching it about devices, and about a Boot line in a loadable program not being installed at all, which is two ways to disagree with the second pass about what a file contains. So osFileDone is told the size instead. A writer asks for as much as the file could possibly come to - the whole of it plus four bytes for every vector DECLARED, which no file can exceed - and says what it really came to at the end. The blocks it did not use go back to the free count. Asking for too much costs a moment; asking for too little writes off the end of a file. That is a better service for it, not a workaround. A writer that cannot know its size until the last byte is the ordinary case, and it is exactly the case this whole rung exists for. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
9f7dffdeca |
S1: the write side learns to stream
osFileStart, osFileWrite and osFileDone are the mirror of osFileInfo and osFileBlock. A program can now write a file it never holds: Pour writes twelve blocks and a tail while keeping 256 bytes of it at a time, and the host tool reads all 3,112 bytes back with every block where it was put. ONE WRITE IS OPEN AT A TIME AND COSMOS HOLDS IT. Reading needs no state - a name and an index are the whole question - but writing safely does, because the new file has to exist before the old one is thrown away and something has to remember which temporary belongs to which name. Keeping that here means the careful order is written once instead of in every program that streams. Nothing already on the disk is touched until osFileDone, so a disk without room says so while the old file is still there. That is stronger than osFileSave can manage, where the size is only known once the caller has every byte in hand. osFileSave stays: Edit and Files hand over whole documents and have no reason to learn any of this. osFileWrite refuses an index past the end of the file, and that refusal is not politeness. Files are contiguous, so block nine of a three block file is a real block belonging to something else, and writing it would put one file's bytes inside another with nothing anywhere saying so. Checked both ways: the tail block is allowed and the one past it is not. Three bugs, all of them the same shape - a register or pointer used for two things at once: DP3 carried the block count in and was popped high byte first, which is the wrong way round from every reader in the system and made the count two hundred and fifty six times too big. sbfsStreamStart took the name in DP0 and then wanted DP0 for something else before it had read it, so it walked whatever it last pointed at and reported that it could find no room. sbfsStreamWrite kept the caller's block in DP3 across a find - DP3 being the pointer a return does not put back, which is exactly why the find uses it too. What went to the disk was whatever the scan last looked at. It goes in memory now, and the file is correct because every block says which block it is; a check on the length alone would have passed all three of these. Writing no longer finds the file for each block either. Nothing moves a file once it is made, so where it starts is settled when the temporary is created. That was not even slow - a scan stops the moment it matches - but it was a walk of the directory per block for an answer that cannot change, and it is 28 per cent of the cost of writing forty blocks. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
da91a36d92 |
D4: the machine makes directories too
mkdir and rmdir are the machine's own now, and a file goes where its path says rather than always in the root. A disk can be organised without the host tool touching it. Everything below the surface works in terms of a directory and a name rather than a path. sbfsWalkParent splits the last name off, walks the rest, and hands back the two - and the separator stays on the end of the head, which is what makes one rule cover every kind of path: "/x" leaves "/", which is the root; "x" leaves nothing, which is where the machine already is; and "A/x" leaves "A/", which is neither and needs no special case to say so. Saving works in those two as well, and had to. The careful order a save uses - make a temporary, write it, delete the original, rename the temporary - only works if the temporary is made in the SAME directory as the file, because the rename at the end changes a name and does not move anything. Renaming to a path naming a different directory is refused for that reason, rather than quietly being a lie the disk goes along with. Three things this cost, all found by running it: mkdir Apps/Deep made /Apps/Apps. The leaf was worked out into SbfsWanted and then the head was walked - and walking goes through sbfsPathNext, which puts every name it meets into SbfsWanted on the way past. The head's last name landed exactly where the leaf was. It has somewhere of its own now. rmdir took a directory with something still in it, which is the one failure the whole design is arranged to prevent. Looking for children clobbered DP2 and rebuilt it from the buffer and the entry count with the subtraction the wrong way round, so the pointer walked off the end of the block and found nothing. The comparison goes through a CALL now, like the two beside it, and DP2 comes back on the entry because a RET puts it there. SplitDisk's "in use but not reachable from the root" line is what caught it. Refusing a name longer than twenty two used to read the twenty third character of a shorter one, which is somebody else's string. It is measured now. Tests/agree.sh is new and is the gate this rung was for: the same disk built twice, once with SplitDisk and once with CosmOS, compared byte for byte. The two share no code and only a written specification, and every field one writes and the other only reads is checked there and nowhere else - which entry a thing lands in, which block, what a directory's unused fields hold, the version, the free count. It caught a wrong parent immediately when that was broken on purpose. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
36ce9f6ccf |
D3: the machine knows where it is
cd moves it, dir lists the directory it is in, and the prompt says which one - but only when that is not the root, so a machine nobody has moved about on looks exactly as it always did and every recorded test that never says "cd" keeps its recorded prompt. A path beginning with a separator is measured from the root and anything else from where the machine is, so a bare name means a file in the current directory. NO PROGRAM HAD TO BE TOLD: the working directory lives in sbfs.asm beside the thing that resolves paths, because it is what a relative path MEANS. Keeping it in the shell would have meant either handing it down on every call or pasting it onto the front of every name, and the second of those is how a name that is already absolute gets ruined. Nothing stores the path. The working directory is an entry index and two bytes, and the text on the prompt is built each time by walking the chain of parents upward, writing names from the end of a buffer towards the front - which is the order they arrive in, and saves reversing them afterwards. sbfsFind splits into a walk and a check. "cd /" and "cd .." both end at the root quite legitimately, and had no way to say so through a routine whose only word for the root was "missing". Typing a program's name now tries two places in order: where you are, then /Apps. The first makes a program you are working on the one that runs; the second lets Snake work from anywhere. A word already beginning with a separator has said where to look, so only that place is tried. osChangeDir exists so that "a program may move about, and the shell puts the working directory back" is a thing that can happen rather than a promise about nothing. Both halves of that were unfalsifiable without it: with no way for a program to move, removing the restore changed no test. Wander is the program that moves - it goes where it is told and reads a file there by a bare name - and with it on the disk, removing the restore fails. The remembered file is dropped whenever what a relative path means changes: a cd, a program calling osChangeDir, a program exiting. Removing all of them fails the test and removing any one of them does not, because today every path into that cache belongs to a program that exits. It is kept in all three because the cost is a call and the failure is a file's blocks being handed out under another file's name. The cwd fixture holds two files called notes.txt saying different things, and a Say.sbx in /A that is really hello. Two copies of one program, or two copies of one file, would have passed with the whole of this deleted. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
36a1b07b5b |
D2: the machine walks a path
sbfsFind takes a path where it used to take a name: names with '/' between them, walked from the root, with '.' and '..'. Each name is looked for among the entries whose parent is where the walk has got to. A bare name is a path of one name, so everything written before directories existed still works and still costs one walk of the directory. sbfsMount takes either version. On a version one disk every entry has zeroes where a parent goes and the walk starts at zero, so the comparison always agrees - which is how a flat disk reads correctly here with nothing done to it. PROGRAMS DID NOT HAVE TO BE TAUGHT ANY OF THIS. Resolution sits inside sbfsFind, below the services, so every osFile call keeps its signature and a path is simply a longer name. Type, More, Edit and the assembler gained subdirectories without a line changing in any of them. Four things this turned up, none of which was the path walk: load copied the path into a buffer sized for a NAME, so anything over 22 characters was cut short - and cut short into a path that often still resolved. "/Apps/Deep/../../Apps/Say.sbx" became "/Apps/Deep/../../Apps/" and reported that the program was a directory. That is the whole of what looked like a bug in '..', and it cost most of the time here. load on a directory SUCCEEDED. A directory has no blocks, so reading it reads nothing and leaves the staging area holding whatever was staged last - which, if that was a program, still says SBEX and still has a working entry address. It handed back the program before it. Refused outright now. delete and rename on a directory are refused, and save refuses one up front rather than failing at the rename and leaving a temporary behind. Deleting a directory frees an entry index, and a parent IS an index, so the next file created would take it and inherit the children. create writes the parent rather than leaving it zero by luck. It would be zero - delete wipes all thirty two bytes and a fresh entry never had any - but that is a fact about two other routines, and a file appearing inside a directory it was never put in is not a failure anybody would think to look for. dir marks directories and counts them apart from files, because at this point it was calling them files of no bytes. Two hazards written down in the design note turned out not to be real, and both were checked rather than argued about: The lookup cache holding 22 bytes of a longer path cannot hand back the wrong file - textSame wants both strings to end in the same place, so a cut down entry misses. It can never HIT either, though, so every path longer than a name went to the disk every time; it holds a whole path now. The allocator stepping over directories changes nothing any test can see. A directory has no start as well as no blocks, so its bounds are nought to nought and no candidate begins before it ends. The four instructions stay, with a comment saying they are not load bearing today and why they are there anyway. makedisks.sh resolves its build path before it cds. Given a relative one it carried on and quietly built disks missing some of their files, which is how the tree fixture lost a file and sent me looking for a bug in '..'. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
4fd8bf7b3f |
Step a Data Pointer with INCD and DECD, not DPUP and DPDN by one
DPUP takes an immediate, so an offset of one is legal and does exactly the right thing. It is also three bytes where INCD is two, and reads as "offset the pointer up by one" where INCD reads as "step the pointer". 56 of them across 15 files: the system, the assembler, the editor, and eight test programs. CosmOS is 9,564 bytes to 9,537, the native assembler 11,648 to 11,635, and every program in the repository together 49 bytes lighter. The worst offender was numbers.asm, written this week, where every sixteen bit helper reaches the low byte and comes back the long way round. It is the file every other part of the assembler includes, so it is the first thing anybody reads when they go looking - and it was teaching them the long way. Pattern matched off sbfs.asm rather than off the instruction table I had just embedded in two programs. THIS IS NOT TWO WAYS TO DO ONE THING. DPUP takes an arbitrary number, so one is inevitably among them; INCD earns its place by making the common case a byte cheaper. The overlap is structural and the choice is a usage question, which is a linter's job rather than an ISA's - "DPUP.n 0d01: INCD.n does this in a byte less" is a mechanical rule with no judgement in it. Nothing needed re-recording, which was not a foregone conclusion: cosmosBreak prints the system addresses the registers happened to hold, and they did not move. Both assemblers still produce identical bytes and CosmOS still builds itself to a fixed point. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
3d2ab34229 |
Streaming: read a file bigger than the machine's memory
osFileRead hands over a whole file, which settles anything under 64K and settles nothing above it. CosmOS's own source is above it - the sources together are 104K against 64K of Data Memory - so a machine that is going to assemble itself needs another way to ask. osFileInfo (0d26) says how many blocks a file occupies. osFileBlock (0d27) hands over one of them and says how many of its bytes belong to the file. Between them a program reads a file of any size through a buffer of 256. Blocks rather than bytes from osFileInfo is forced, not chosen: a file on a sixteen megabyte disk is up to twenty four bits long and a pointer holds sixteen. osFileBlock's count answers in DP3 for the same kind of reason - a whole block is 256 bytes, which does not fit in a register, and a count that reported it as zero would make every reader special-case the end. Nothing is kept open. Every call names the file, so there is no handle to leak and nothing left behind by a program that stops halfway. Taken at its word that means searching the directory once per block, so the system remembers where the last file it was asked about lives; every path that can change what a name means calls fileForget, including the shell's own delete and rename, which do not go through the services. Correctness never depends on the cache - a cache thrown away is indistinguishable from one never filled. Measured on a 329 block file: 7% of the run saved when the file is the first directory entry, 11% when it is the sixteenth. These two say WHY when the answer is no, which the others do not. Elsewhere the only useful response to a failure is to give up, so one value suffices. These are asked questions, and running off the end is how a reader learns it has finished, so it gets an answer of its own: 1 no disk, 2 no such file, 3 past the end, 4 the disk refused. Apps/Stream.asm reads an 84,000 byte file through 256 bytes. The check that matters is the second one: a small file read BOTH ways - whole with osFileRead and streamed - with the two checksums compared, so streaming is measured against the path already known to work rather than against a number someone wrote down. The checksum is Fletcher's rather than a sum, because a sum is the same whatever order the bytes arrived in and the order is exactly what streaming has to get right. Both checksums were also confirmed against the same arithmetic run on the host. The rest of the test is the cache: two files read alternately catch a memory that missed the name changing, and a rename catches one that missed the file moving - and that one would otherwise pass, since the blocks are still there holding the same bytes. The test file is generated rather than taken from the repository. The CosmOS sources would be a truer picture and would move the recorded checksum every time a line of CosmOS was edited, putting a real difference in a crowd of meaningless ones - the same trap the cycle counts used to set. cosmosBreak's recorded output moves by two bytes in two pointers: SbfsIndex added two bytes to the filesystem's data and Break prints the system addresses the registers happened to hold. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
301716e869 |
sbfs: give sbfsMatchEntry a counter of its own
sbfsFind counts a block's eight entries in SbfsCount and calls sbfsMatchEntry for each one, and sbfsMatchEntry used the same variable for its own twenty two byte comparison. A name differing at its first byte returned without decrementing, leaving 22 in the entry counter, so the search then walked twenty two entries through a buffer holding eight: off the end of it, into whatever data happened to follow, matching against rubbish and reporting a file that is not there as found. It had always been there. What decided whether it looked like it worked was the bytes after SbfsBuffer, so it stayed hidden until unrelated data was added and changed them. It showed up as "dir" followed by any failed "load" reporting that the file could not be read rather than that it does not exist. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Anachronaut
|
e3100b4718 | Fixed assembler bug that caused crash on IR array resize. Added line editor app. | ||
|
Anachronaut
|
91c9d49d1b | CosmOS pre-alpha and launchable application versions of old programs. |