SplitBit-Emulator/Source/Emulator/video.c

// video.c
// The Voyager's video device.
// Written by Anachronaut

#include "video.h"
#include "font.h"
#include "io.h"
#include <stdio.h>
#include <string.h>

// The bank the device brings. Registered by whoever enumerates the hardware, reached only
// through the memory controller, and never by the CPU directly - the same arrangement the
// disk's buffer has always had.
static uint8_t videoRAM[VIDEO_MEMORY_BYTES];

static uint8_t mode;
// Which map row is drawn at the top. THE MAP IS A RING: rendering row r reads map row
// (scroll + r) wrapped, so scrolling a screen moves this byte and moves no memory at all.
//
// That is worth more than it looks. Blitting a 40 by 25 screen up one line is 1,920 bytes
// inside one bank, which is 1,920 cycles even with the controller widened - twelve percent
// of a frame, every line. A program printing one page would spend six frames shuffling
// memory. Here it costs one port write, and the rows that scrolled off are still there,
// which is where the console gets scrollback it never had.
static uint8_t scroll;

static uint8_t pixels[VIDEO_MAX_WIDTH * VIDEO_MAX_HEIGHT * 3];
static int renderedWidth = 0;
static int renderedHeight = 0;

static int columnsFor(uint8_t m) { return m == VIDEO_MODE_80x50 ? 80 : 40; }
static int rowsFor(uint8_t m)    { return m == VIDEO_MODE_80x50 ? 50 : 25; }

int videoColumns(void) { return columnsFor(mode); }
int videoRows(void)    { return rowsFor(mode); }

// ---- Sixteen schemes a machine wakes up with ----
//
// A glyph is drawn in palette indices 0 and 1, paper and ink, and a cell's attribute nibble
// adds sixteen to both. So bank n colours text with entries n*16 and n*16+1, and SIXTEEN
// BANKS IS SIXTEEN INK AND PAPER PAIRS - a text attribute system that costs one nibble and
// no hardware at all.
//
// The arrangement is a convention rather than a rule of the machine, and it is chosen so
// that HIGHLIGHTING IS ONE BIT. Banks 0 to 7 are colours on black; banks 8 to 15 are the
// same colours as paper with black ink. Attribute XOR 8 therefore turns any of them inside
// out, which is what a cursor and a selected line both want, and a program that disagrees
// writes its own palette over the top.
//
// Bank 0 is grey on black, which is what the machine has always woken up as.
//
// BLACK IS BLACK AND GREY IS GREY. These were tinted towards green to begin with, on the
// theory that a phosphor never was neutral, and on a real screen it read as a fault rather
// than as character - a background that is nearly black looks like a background that failed
// to be black.
static const uint8_t defaultInks[8][3] = {
    { 0xD8, 0xD8, 0xD8 },   // grey, which is what plain text has always been
    { 0xD0, 0x40, 0x38 },   // red
    { 0x50, 0xC0, 0x50 },   // green
    { 0xD8, 0xC0, 0x48 },   // yellow
    { 0x58, 0x80, 0xE0 },   // blue
    { 0xC8, 0x60, 0xC0 },   // magenta
    { 0x50, 0xC0, 0xC8 },   // cyan
    { 0xF0, 0xF0, 0xF0 },   // white
};
static const uint8_t defaultPaper[3] = { 0x00, 0x00, 0x00 };

// Where the cursor is, whether it is wanted, and what the clock says - which is what makes
// it blink without anything having to remember when it last did.
static int cursorAtRow = 0;
static int cursorAtColumn = 0;
static int cursorVisible = 0;
static unsigned long videoNow = 0;

// When the last frame boundary went by, whether one has gone by unnoticed, and whether the
// screen is meant to say so out loud.
static unsigned long lastFrame = 0;
static int frameWaiting = 0;
static int frameInterrupts = 0;

void videoSetCursor(int row, int column, int visible) {
    cursorAtRow = row;
    cursorAtColumn = column;
    cursorVisible = visible;
}

void videoTick(unsigned long now) {
    videoNow = now;
    // ---- Caught up rather than counted ----
    //
    // A loop, because more than one frame can go by between two looks: the machine runs in
    // batches, and a slow host or a --fast run can cover several frames before anything asks.
    // The flag and the line are each ONE THING, so several frames at once still mean one of
    // each - a missed frame is missed, which is what missing one is.
    while (now - lastFrame >= VIDEO_FRAME_CYCLES) {
        lastFrame += VIDEO_FRAME_CYCLES;
        frameWaiting = 1;
        if (frameInterrupts) {
            raiseInterrupt(PORT_VIDEO);
        }
    }
}

void videoLoadFont(void) {
    // One bit a pixel becomes one byte a pixel: index 1 where the font has a dot and 0
    // where it does not, which is what makes the two palette entries below mean ink and
    // paper. Glyphs the font does not have are left blank rather than left as whatever was
    // in tile memory.
    memset(videoRAM + VIDEO_TILE_BASE, 0, (size_t)VIDEO_TILE_COUNT * VIDEO_TILE_BYTES);
    for (int glyph = 0; glyph < CONSOLE_FONT_GLYPHS && glyph < VIDEO_TILE_COUNT; glyph++) {
        uint8_t *tile = videoRAM + VIDEO_TILE_BASE + glyph * VIDEO_TILE_BYTES;
        for (int y = 0; y < CONSOLE_FONT_BYTES; y++) {
            const unsigned char row = consoleFont[glyph * CONSOLE_FONT_BYTES + y];
            for (int x = 0; x < VIDEO_CELL_PIXELS; x++) {
                tile[y * VIDEO_CELL_PIXELS + x] = (row & (0x80u >> x)) ? 1 : 0;
            }
        }
    }
    uint8_t *palette = videoRAM + VIDEO_PALETTE_BASE;
    for (int bank = 0; bank < 8; bank++) {
        // Colour on black, and then the same colour as paper with black ink, sixteen banks
        // apart so that one bit turns either into the other.
        memcpy(palette + (bank * 16 + 0) * VIDEO_PALETTE_BYTES, defaultPaper, 3);
        memcpy(palette + (bank * 16 + 1) * VIDEO_PALETTE_BYTES, defaultInks[bank], 3);
        memcpy(palette + ((bank + 8) * 16 + 0) * VIDEO_PALETTE_BYTES, defaultInks[bank], 3);
        memcpy(palette + ((bank + 8) * 16 + 1) * VIDEO_PALETTE_BYTES, defaultPaper, 3);
    }
}

void videoPutCell(int screenRow, int column, uint8_t tile, uint8_t attribute) {
    if (screenRow < 0 || screenRow >= rowsFor(mode)) return;
    if (column < 0 || column >= columnsFor(mode)) return;
    const int mapRow = (scroll + screenRow) % VIDEO_MAP_ROWS;
    uint8_t *cell = videoRAM + VIDEO_MAP_BASE + mapRow * VIDEO_MAP_STRIDE
                  + column * VIDEO_CELL_BYTES;
    cell[0] = tile;
    cell[1] = attribute;
}

void videoScrollUp(void) {
    scroll = (uint8_t)((scroll + 1) % VIDEO_MAP_ROWS);
    // The row now at the bottom held whatever was there a ring ago, so it is cleared. The
    // rows that went off the top are NOT cleared, which is the whole of the scrollback: a
    // hundred rows of what has already been said, still sitting in the map.
    const int bottom = rowsFor(mode) - 1;
    const int mapRow = (scroll + bottom) % VIDEO_MAP_ROWS;
    memset(videoRAM + VIDEO_MAP_BASE + mapRow * VIDEO_MAP_STRIDE, 0, VIDEO_MAP_STRIDE);
}

void videoReset(void) {
    memset(videoRAM, 0, sizeof(videoRAM));
    mode = VIDEO_MODE_40x25;
    scroll = 0;
    renderedWidth = 0;
    renderedHeight = 0;
    lastFrame = videoNow;
    frameWaiting = 0;
    frameInterrupts = 0;
    clearInterrupt(PORT_VIDEO);
    // A machine wakes up able to show text. Everything here is ordinary video memory that a
    // program may overwrite the moment it wants the screen for something else.
    videoLoadFont();
}

uint8_t *videoMemory(uint32_t *capacity) {
    *capacity = VIDEO_MEMORY_BYTES;
    return videoRAM;
}

uint8_t videoWrite(uint8_t value, uint8_t port) {
    switch (port) {
        case VIDEO_MODE:
            // A mode that does not exist is not taken. Refusing outright would be the other
            // choice, but a screen is not the place to stop the machine: a program that
            // asked for something impossible still has the screen it had.
            if (value < VIDEO_MODE_COUNT) {
                mode = value;
            }
        break;
        case VIDEO_CONTROL:
            frameInterrupts = (value & VIDEO_CONTROL_FRAME) != 0;
            if (!frameInterrupts) {
                // Asking to stop being interrupted takes down whatever was already asked
                // for. A request that outlived the setting that made it would arrive at a
                // program which had just said it did not want it - the same reasoning the
                // console's interrupt bit is written under.
                clearInterrupt(PORT_VIDEO);
            }
        break;
        case VIDEO_SCROLL:
            // Wrapped rather than clipped, because the map is a ring and every byte names a
            // row that exists.
            scroll = (uint8_t)(value % VIDEO_MAP_ROWS);
        break;
        default:
            // Everything else is read only or not there yet. Writing does nothing rather
            // than refusing: a port block reserved for later should be quiet, not fatal.
        break;
    }
    return 0;
}

uint8_t videoRead(uint8_t port) {
    switch (port) {
        case VIDEO_STATUS: {
            uint8_t status = 0;
            if (frameWaiting) {
                status |= VIDEO_STATUS_FRAME;
            }
            if (frameInterrupts) {
                status |= VIDEO_STATUS_INTERRUPT;
            }
            // Looking is what answers it. A frame that has been noticed is not still
            // waiting to be, and a program polling in a loop would otherwise see the first
            // frame for ever.
            frameWaiting = 0;
            return status;
        }
        case VIDEO_CONTROL:
            // Write only. Everything it sets is reported by the status port, and one fact
            // wants one place to live.
            return 0;
        case VIDEO_MODE:    return mode;
        // Asked rather than assumed. A program that wants to know how wide the screen is
        // should be able to find out, the same way it asks the console what mode it is in.
        case VIDEO_COLUMNS: return (uint8_t)columnsFor(mode);
        case VIDEO_ROWS:    return (uint8_t)rowsFor(mode);
        case VIDEO_SCROLL:  return scroll;
        default:            return 0;
    }
}

void videoRender(void) {
    const int columns = columnsFor(mode);
    const int rows = rowsFor(mode);
    const int width = columns * VIDEO_CELL_PIXELS;

    for (int row = 0; row < rows; row++) {
        // The ring. Rows that scrolled off the top are still in the map, which is what
        // makes scrollback free rather than something the console has to keep itself.
        const int mapRow = (scroll + row) % VIDEO_MAP_ROWS;
        const uint8_t *cells = videoRAM + VIDEO_MAP_BASE + mapRow * VIDEO_MAP_STRIDE;
        for (int column = 0; column < columns; column++) {
            const uint8_t tile = cells[column * VIDEO_CELL_BYTES];
            uint8_t attribute = cells[column * VIDEO_CELL_BYTES + 1];
            // ---- The cursor, turned inside out ----
            //
            // Not a glyph of its own, because a block drawn over a cell hides what is in it
            // and a person editing a line wants to see the character they are standing on.
            // XOR 8 swaps a bank for its reverse, which is what the default palette is laid
            // out to make possible.
            //
            // The phase comes from the machine's clock, so a screen saved at a given cycle
            // count is the same screen every time.
            if (cursorVisible && row == cursorAtRow && column == cursorAtColumn
                && ((videoNow / VIDEO_BLINK_CYCLES) & 1) == 0) {
                attribute ^= 0x08;
            }
            // ---- The additive nibble ----
            //
            // The low nibble of the attribute is added to every palette index in the tile,
            // sixteen at a time. A tile drawn in indices 0 to 15 therefore appears in any
            // of sixteen colour schemes without a second copy of it in tile memory, and a
            // tile that wants all 256 colours simply leaves the nibble at zero and gets
            // them. One adder in hardware, and neither use costs the other anything.
            const uint8_t bank = (uint8_t)((attribute & 0x0F) << 4);
            const uint8_t *art = videoRAM + VIDEO_TILE_BASE + tile * VIDEO_TILE_BYTES;
            for (int y = 0; y < VIDEO_CELL_PIXELS; y++) {
                uint8_t *out = pixels + ((row * VIDEO_CELL_PIXELS + y) * width
                                         + column * VIDEO_CELL_PIXELS) * 3;
                for (int x = 0; x < VIDEO_CELL_PIXELS; x++) {
                    // Wrapping, because a byte plus a byte is a byte. A tile using the
                    // high end of the palette with a nibble set comes round the bottom,
                    // which is what an adder does and what the manual says it does.
                    const uint8_t index = (uint8_t)(art[y * VIDEO_CELL_PIXELS + x] + bank);
                    const uint8_t *entry = videoRAM + VIDEO_PALETTE_BASE
                                         + index * VIDEO_PALETTE_BYTES;
                    *out++ = entry[0];
                    *out++ = entry[1];
                    *out++ = entry[2];
                }
            }
        }
    }
    renderedWidth = width;
    renderedHeight = rows * VIDEO_CELL_PIXELS;
}

const uint8_t *videoPixels(int *width, int *height) {
    *width = renderedWidth;
    *height = renderedHeight;
    return pixels;
}

// A binary PPM, because it is the smallest format that needs no library to write and no
// library to read - which matters when the thing reading it is a test script.
int videoWriteImage(const char *path) {
    videoRender();
    FILE *file = fopen(path, "wb");
    if (file == NULL) {
        fprintf(stderr, "Error: Couldn't write the screen to: %s\n", path);
        return 1;
    }
    fprintf(file, "P6\n%d %d\n255\n", renderedWidth, renderedHeight);
    size_t bytes = (size_t)renderedWidth * (size_t)renderedHeight * 3;
    size_t written = fwrite(pixels, 1, bytes, file);
    fclose(file);
    if (written != bytes) {
        fprintf(stderr, "Error: The screen was not written whole to: %s\n", path);
        return 1;
    }
    return 0;
}