Kind and Number together are what names a thing: Vector 16 and Device 32
are identifiers in a way that Vector on its own is not. Everything after
them - where it lives, what it is called, where it was written - says
something about it rather than naming it, so with the number at the far
end a line opened with a bare kind and closed with the fact that would
have told you what you were reading.
Fields are now Kind, Number, Address, Name, File, Line. A label still
carries a dash where its number would be, which reads as "this kind is
not numbered" rather than as a field that went missing.
Manual and the docs check follow. Verified with break.sh by swapping the
number and the address back.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
A vector is the one thing about a program that nothing else can tell
you. A pinned vector has its number in the source that pinned it, but a
vector the assembler numbered has that number nowhere at all - not in
the source, not in the binary in any form a reader can find. Until now
there was no way to learn that a vector became number 64.
It also cost two hops to follow by hand. The name in "SWI osPrintString"
is not the name of the routine that implements it, so finding the code
meant searching for the vector, reading the handler's name off the
Vector Segment, and searching again. A vector row now names the handler
and gives the line the two were tied together on.
Both numbers, at the user's asking, because neither can be worked out
from the other without knowing which table the vector is in: the Number
is what a program writes and the machine dispatches on, the Address is
where the handler's address is stored, base plus twice the number. The
slot is computed with the same expression the loader is given, so what
the table says and what gets written there cannot drift apart. A vector
a program only declares is listed too - that is how a program says which
vectors it calls, and how two programs can be checked against each other
for agreeing about a number.
A device has no name of its own, being named by the port it is plugged
into, so it is listed under its handler.
The first field is now Kind rather than Memory, because Vector and
Device are not memories. Sorted Program, Data, Vector, Device.
docs.sh checks the six fields against the manual and against real dumps
of two programs - Keys, a loadable program with all four kinds, and
cosmos, a boot image whose segments both start at zero. It now also
checks that a row's name really appears on the line the row names, which
is what catches the string-newline bug fixed in ca6c8ca coming back.
Verified with break.sh four ways: wrong slot arithmetic, vectors
dropped, a field renamed in the manual, and that bug reintroduced.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
readToken consumed a string literal character by character and counted
none of the newlines in it, so every line number after a multi-line
string was short by one - and by one more for each one after that.
cosmos.asm has seven such strings spanning thirteen lines, so by the end
of the file the assembler was reporting labels thirteen lines early.
That was never only a cosmetic problem: the same counter is what every
error message names, so an error anywhere after the help text was
pointing at somebody else's code, thirteen lines away, with no sign that
it was doing so.
Found because the symbol table started publishing line numbers, which
made a wrong one something you could look at. Verified against all 797
of cosmos.asm's labels, every one of which now names the line it is
actually on. The check that keeps it that way comes with the next
commit, which is what gives it something to check.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
The dump was an address and a name. Both of the questions it gets asked
were only half answered.
"What is at this address" was ambiguous, because Program and Data are
separate memories and an address alone does not say which one. That is
easy to miss in a loadable program, where the segments are usually based
far apart - and immediate in a boot image, where both start at zero:
replCalculator has a Program 0003 and a Data 0003 and the old file
printed both as "0003 <name>".
"Where is this defined" was not answered at all, and it is the one that
matters more as a program grows. A name defined once and called in forty
places is hard to find by searching. Lander's table names five files
besides its own; CosmOS and its libraries define over a thousand names
across a dozen.
So: memory, address, name, file, line, separated by tabs, sorted by
memory and then address with Program first. Tabs because that makes it a
table cut, awk and sort already read, and no heading line because
nothing should have to know to skip one. Everything needed was already
being passed to addLabel and thrown away; the file name points at the
copy the include list owns, which outlives the label table.
The manual describes the five fields, and docs.sh now settles that
description against a real dump - the shape, not the values, so that an
example cannot go stale and turn editing a program into editing a
manual. Verified with break.sh three ways: a reordered field, a dropped
field, and a field renamed in the manual.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
-S was added without a row in the Assembler Manual, and the usage it
printed listed a bare "-S <file>" with no long name and no statement of
what the file is for. That is not merely incomplete, it is misleading:
"-S <file>" reads just as naturally as "dump the symbols of <file>", and
asking for it that way hands the source to -S, leaves nothing positional
behind it, and is answered with "No source file specified" on a command
line that plainly names a source. The error described the hole the
mistake left and hid the mistake.
So the usage now prints the long names, says outright that every <file>
is a path it writes and the source is the last argument on its own, and
ends with a whole example command. When the source is missing and a
file-taking option was given, the error says which options take a path
to write. The manual gains the -S row it never had, a warning in the
same words, and a sentence on what a symbol dump is for.
Documenting it twice is how it went wrong once, so docs.sh now settles
both against getopt's own option table: every option the assembler takes
has a row in the manual and a line in its own usage. Verified with
break.sh against the manual row and the usage line separately.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
The first word of a line, against the shell's fifteen commands. One match goes in
with a space after it, because a word that can only be one thing is finished.
Several are folded into their longest common prefix and that goes in, which is
the most that can be said without guessing which was meant - and if that adds
nothing, the matches are listed and the line put back underneath.
THE LINE COMING BACK IS THE HALF I EXPECTED TO BE HARD and it was already
solved. The prompt has been reprinted somewhere else entirely, so the editor's
idea of where the line begins is wrong - but editAnchor works that out backwards
from where printing ended, precisely so it survives the screen moving. Listing is
a redraw it already knew how to do.
editInsert became editPut, a routine, because completing a word puts in several
characters and every one of them is that. Which cost a bug immediately: the old
inline code left the insertion point in A, and a RET puts A back to what the
caller had.
Two more bugs worth naming, both mine and both the same shape - a pointer that
had moved:
THE CANDIDATE'S START HAS TO BE KEPT. The comparison walks DP3 through the name
as it matches, so by the time a match is declared, DP3 points at the part AFTER
what was typed - and that is what got copied. "he" completed to "he" because the
answer taken was "lp".
AND THE INSERTION STOPS AT OR PAST, not exactly equal. With the wrong answer the
two counters passed each other and the loop ran off the end of the buffer,
filling the line with whatever was next in memory. They cannot pass each other
now, and the branch stays, because the cheaper failure is worth nothing.
MY OWN TEST HAD A HOLE and breaking the code found it. The later-word case
pressed Tab after a space, where there is nothing to finish anyway, so it passed
whether or not the shell checked which word it was on. It types "echo he" now,
which would become "echo help" if it did not.
The assembler's label table went past 1024 and is doubled. A ceiling reached
once will be reached again, and it is pointers into source already in memory.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
Dispatching through a vector with nothing in it was the one fault this machine
could not hand over, because the thing that would hand it over is the thing that
has just found nothing to hand it to. It stopped the machine and no program
could do anything about it - so calling a service the system does not implement
was fatal, and that is an ordinary mistake to make.
Two new fault vectors: 5 when a software vector was empty, 6 when a device
interrupted and its hardware entry was. Separate, because they are separate
mistakes with separate fixes - one is a program calling something that is not
there, the other a program that asked to be interrupted and forgot the handler.
WHICH ENTRY WAS EMPTY ARRIVES IN Q, and it is the only thing on this machine a
handler is given in a register. Not a fault cause register by another route: the
vector still says what happened and Q says which of the 256 entries it happened
about, which is a parameter and not a cause. It costs no new state at all,
because the frame already saved the Q the interrupted program had and RETI puts
it back.
The escalation happens once. If vector 5 or 6 is itself empty the machine stops
the way it always did, having genuinely run out of places to go.
swiFaultTest is what guards that, and it was written long before any of this: it
installs nothing, so it must still get the old halt. Breaking the escalation
fails the two new tests and not that one; making the escalation unbounded fails
that one and not the two new ones. Each break fails exactly the half it belongs
to.
noDeviceTest is fed no input on purpose. The console raises its line once when
input ENDS as well as when a byte arrives - which exists so a program driven by
interrupts is told when nothing more is coming - so with no input at all, that
end is what turns up.
Groundwork for CosmOS's fault screen, which wanted to catch these two and could
not.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
CALL saves A, B and Data Pointers 0 to 2 and nothing else, which is exactly
why Q and DP3 are how a subroutine hands something back. An interrupt saves
all of it, so a service with an answer had to reach into its own frame and
un-save two fields by hand:
MVSD.2
DPUP.2 0d02 ; the saved Q, by an offset it had to know
STA.2
RETI
Thirty places in CosmOS did that. Every one knew the frame's layout by
heart, and all thirty would have gone quietly wrong the day the frame
gained a field - the same duplicated fact this project keeps being bitten
by, except duplicated into thirty places AND into the CPU.
SRET is 0x76, in the seat the block split left for it. It is RETI's frame
with RET's rule applied: A, B and DP0 to DP2 come back, the saved Q and DP3
are dropped, and the Interrupt Flag is restored from the frame - only that
bit, so carry survives a service the way it survives a call, and there is
one rule rather than two. RETI stays exactly as it was: a hardware handler
has nothing to say and must leave no trace.
CosmOS is 10,969 bytes against 11,122, and no handler knows a frame offset.
TWO MISTAKES WORTH RECORDING, both mine, both caught by tests.
The first conversion matched STA.2 with a regular expression that did not
allow a trailing comment, so it ran past the end of one handler and into
the next. The second understood the pattern and still got it wrong: the old
frame write carried the answer from A into the saved Q slot, so simply
deleting the write left Q holding whatever it happened to hold. Services
that answer by calling something were fine - Q already had it - and
services that set A directly silently reported success for every failure.
cosmosCwd is what noticed, by saying "cannot go there" about a directory
that was there. Sixteen handlers move the answer into Q now.
Seven MVQA went with it. They copied Q into A so the frame write could
carry it; SRET puts A back, so they moved a value nobody would ever read.
Three blocks move and nothing else changes. Branches take 0x60, subroutines
take 0x70, and the ALU moves up into the 0x10 block the two of them used to
share. Order within each block is preserved exactly - this relocates them,
it does not rethink them.
WHAT IT BUYS IS AN EMPTY 0x00 TO 0x0F. Program Memory that was never
written, or a load that stopped part way and left zeroes in its tail, used
to read as a long run of ADDs: the machine carried on through them, arrived
somewhere unpredictable, and whatever broke there was a long way from the
byte that caused it. Now it faults where it is met:
Fault: 0x00 at Program Address 0x0004 is not an instruction.
That is the address of the byte after the last real instruction, which is
the difference between a diagnosis and a search. Reserving the whole nibble
rather than just 0x00 means a run into blank memory faults wherever it
starts rather than only when it lands on the right byte. runOffTest records
it, and the block is left empty for whatever turns out to want it.
The other half is room: branches and subroutines had filled 0x10 to 0x1F
between them, so a service return that keeps Q and DP3 had nowhere to sit
next to its family. It has 0x76 waiting now.
Five places wrote an opcode down that the scripted remap did not reach, and
four of them were found by tests rather than by looking:
- secondPass.c lists which opcodes take an address, and firstPass.c knows
SWI by number. Missing those made XOR read as a branch.
- Asm.asm knows SWI by number too, being the other assembler. Missing it
made the native and host assemblers disagree byte for byte, which is
exactly the check that exists to catch a thing known in two places.
- loaderTest.asm carries a hand written payload, and its RETI was 0x19. To
the assembler those are numbers and to the program they are data, so
nothing but running it could notice. It says so in a comment now.
- The Assembler Manual prints the bytes hello.asm assembles to, and two of
them were branches.
The monitor's recorded disassembly moved by exactly the bytes it should:
18 became 72 wherever SWI appears, with SETD and INIB untouched and every
disassembled line still reading the same.
HALT is terminal - stepCPU returns at once when the Halt Flag is up, so a
halted machine does not execute, service devices, or take an interrupt -
and that has to stay true, because every test ends with a halt and "halted"
is how a program says it has finished. The consequence was that SplitBit
had no way to wait at all. Every wait was a spin, and a spin is bus
traffic: 11.5% of Type over a 14K file on a disk of ten thousand cycles,
after read-ahead had already hidden three quarters of the latency.
WAIT is 0xFE, one byte, no operands, sitting under HALT where the
instruction that almost stops the machine belongs. Three decisions in it:
- A line already standing means there is nothing to wait for, so WAIT does
nothing. That is what makes test-then-wait race-free.
- Any line ends the wait, masked or not, so a program can sleep on a device
it has no handler for and read its status afterwards. Masking says who
answers a request, not whether it happened.
- A line that wakes the CPU without being dispatched is taken down by the
WAIT. Left standing it would be found by the next WAIT, which would
return at once - the program would spin exactly as before while looking
as though it slept.
Waiting is NOT a Status bit, and that is the trap avoided rather than a
gap: Status rides into the interrupt frame and comes back out, so a machine
interrupted mid-wait would return from its handler still waiting, and wait
again for what it had already been given. An internal field instead.
Idle cycles are counted apart from bus cycles and the halt line says so
when there are any, which is what makes the difference observable at all -
with the line-clearing removed the total moves by ONE cycle, 20,100 against
20,099, and only the idle half changes, halving to 9,976. A test on
totals could never have seen it. Tests/terminal.sh asks that question,
being the file for things a recorded output cannot see, and fails with the
clear removed while "both reads finished" still passes.
Three collisions, all found by building it:
- 0xFE was the assembler's "not an instruction" sentinel. getOpcode now
answers a negative NOT_AN_OPCODE, which is outside the range of every
possible answer instead of inside the unused part of it.
- 0xFE was also what faultTest and faultResumeTest executed to provoke a
fault. They now use 0xFD and say why, because they did not fail when it
became an instruction - they HUNG, having started sleeping instead.
- Keys.asm has had a label called "wait" for a year, and mnemonics are
matched uppercased. What that reported was "Branch without label" at the
BRQ thirty lines away. The assembler now refuses a label that is already
an instruction, at the label, by name; every instruction added takes a
word out of the space of label names, so this will happen again.
-S writes every label and the address it was given, in address order.
Nothing else knows that. A program on the disk is bytes; the monitor can
disassemble it but has no idea what any of it is called. So counting which
addresses a program calls says a great deal and names nothing - the answer
arrives as a column of numbers and somebody works out by hand which routine
each one is inside.
It was deferred when the native assembler was planned, as a listing and symbol
dump nobody needed yet. Finding out where the assembler spends its time is what
needed it: the top six call targets were addresses until this existed and are
numStep, numCompare, tokGet, srcNext, numAddByte and clsSameName with it.
Sorted by address rather than by name, because the question asked of it is
always "what is at this address".
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
The six settled back on the twenty fourth, built now.
RCAL and RRET are a call that puts nothing back. CALL restores A, B and Data
Pointers 0 through 2, which costs ten bytes of Stack and is why a subroutine
here can only hand anything back through Q, DP3 or memory. RCAL costs two and
restores nothing, which is what a short leaf routine wants and is unsafe in
exactly the way the name says.
They are a pair because the frames are different sizes: returning from one
through the other walks the Stack to somewhere that was never a return address.
That was the user's correction to the original proposal, which had a raw call
and no raw return.
DPUA and DPDA offset a Data Pointer by A; DPUW and DPDW by A and B together,
most significant first. DPUP and DPDN take a byte written into the program, so
moving a pointer by something just worked out meant storing it and loading it
back. Down as well as up on symmetry grounds, which was also the user's call -
the argument against it came from counting uses in a corpus written under the
constraint.
The opcodes sit where they belong: 0x16 and 0x1E immediately below CALL and RET,
and 0x4E through 0x51 at the end of the Data Pointer family. All six fit shapes
that already existed, so instructiontable.py needed only set membership and both
machine side copies of the table regenerated from it unchanged.
Checked at every level it exists at: the emulator runs them, the host assembler
encodes them, the monitor disassembles all six with the right lengths, and the
assembler that runs on the machine builds a program using them byte for byte
identically to the host - and that program runs.
The recorded test measures what the two calls COST as well as what they put
back, because an RCAL that quietly did what CALL does would still return to the
right place. It does not survive that: returned through RRET, it hangs.
docs.sh can read a two word number now. The count of instructions taking a Data
Pointer went past twenty, and the pattern only allowed one word, so the check
would have reported that the manual had stopped saying it rather than that the
number was wrong.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
It always wrote .bin, whatever it had built. So assembling a loadable
program without -o produced Say.bin containing SBEX - a boot image name on a
file the machine cannot boot, in a repository whose whole convention is that
a .bin is started from and a .sbx is loaded.
Successfully wrote SplitBit boot image to "hello.bin".
Successfully wrote SplitBit loadable program to "Say.sbx".
programIsLoadable() already existed and is already what decides which
writer runs; the name now asks it too. Nothing in the build depended on the
old behaviour, because everything that assembles anything passes -o.
THE ASSEMBLER THAT RUNS ON SPLITBIT ALREADY DID IT THIS WAY. Two assemblers
naming their output differently from the same source is exactly the kind of
difference that wastes an afternoon, and the newer one was right.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
"Binary" was doing three jobs. It meant an SPBT file that the machine starts
from; it meant whatever the assembler happened to produce, which is now
either that or a loadable program; and it meant a compiled host tool. A word
that means three things means none of them, and the first of the three has a
name already - this project has been calling them boot images for a while
and the manuals had not caught up.
Where it means an SPBT file -> boot image
Where it means either output -> output
Where it means a host executable -> left alone
Where it means base two -> left alone
The user facing messages move with it:
Error: No boot image specified.
Usage: ./SplitBit [OPTIONS] <boot image>
Error: This is not a SplitBit boot image.
Error: This boot image is in format version 2, and this emulator reads 1.
Successfully wrote SplitBit boot image to "hello.bin".
The assembler's own help was the interesting case. Its -o writes either
format, so "the binary" there was never right - it is "the output" now, and
the message that names the format is the one that says which it wrote.
No recorded output contained the word, so nothing needed re-blessing.
Checked before starting rather than after.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
The quotes are gone by the time a token is classified, so checkIfKeyword's
test of token[0] == '#' matched the STRING "#Program" sitting in a program's
Data Segment. It was read as the directive: the segment silently changed in
the middle of the data, the string's nine bytes were charged to the Program
cursor instead of the Data one, and every label defined after it came out
nine bytes wrong - in a file that still had a valid header, a plausible
length, and nothing to say about any of it. The only symptom was a program
that jumped into the middle of an instruction.
This is the FOURTH of the family. A string spelling a mnemonic assembled as
that instruction; a string beginning with a zero was rejected as a malformed
literal; a string in the Program Segment was discarded in silence. The
instruction check and the literal check both carry a "not a STRING" guard
already. This one did not, so it has one now, and it lives inside
checkIfKeyword rather than at the call site so it cannot be left off again.
Nothing had ever triggered it, because nothing had ever needed a directive's
name as data. An assembler written FOR this machine necessarily does: it has
to compare tokens against "#Program" and "#Data". It was found by building
one and watching it fault on its second instruction.
Test stringKeyword puts every directive name in a program's data and prints
a label defined after them. Verified that it bites: without the fix the
assembler refuses the file outright.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
A token is classified after its quotes have been stripped, so a string
literal reading "ADD" looked exactly like the ADD instruction and was
assembled as one. It failed with "attempting to assemble outside the
Program Segment", a message about a mistake nobody had made.
The literal and label checks were already guarded against strings and the
instruction check was not. Mnemonics match without regard to case, so
"or" and "and" were caught by this too, and those are ordinary enough
words to want in a message.
Third of its family, after a string beginning with '0' being read as a
malformed number and a string in the Program Segment being silently
discarded. All three have the same root.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The loadable program format's header has been in the working tree since
the loader was written and has never been in the repository: the gitignore
rules matched Source/Assembler as a directory, so it was silently
untracked. Anything cloning this repository could not build it, because
secondPass.c includes this file.
This is the failure the previous commit describes, having already happened
once without being noticed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Added DPUP and DPDN, which take a one byte operand specifying how far up or down to offset the Data Pointer.
Three Fibonacci generators using the print.asm library.
- 8 bit values printing in decimal representation.
- 16 bit values printing in hexadecimal representation.
- 32 bit values printing in hexadecimal representation.
AnachronautandClaude Opus 5
Anachronaut