81e544eb3d9074fd2ebfb67d7c10fef648b93735
100
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  AnachronautandClaude Opus 5
|
81e544eb3d |
Load a program that has no data
A five instruction program that writes one port and exits has no Data Segment at all, and the loader stopped the machine dead on it. It asked the memory controller to move a segment of no bytes, and a length of zero asks for the whole 64K - which is the machine's rule, and a reasonable one, since two bytes cannot say 65536 and a transfer of nothing is not usually what anybody meant. It is exactly what was meant here. 64K did not fit, the controller refused, and the load stopped half done. ON A TERMINAL THAT PRINTS A FAULT WITH AN ADDRESS. Behind a window it is a frozen picture and no reason at all, which is how it was found and is a separate problem from this one. The header says how long each segment is, so the loader knows before it asks. Both bytes are already in hand, so the test costs one OR. Nothing is lost by skipping the transfer: a blit leaves the controller's addresses past whatever it touched, and a blit of nothing would have left them where they already are, which is where the vectors are read from next. Guarded for the code segment too. A program with no code is equally assemblable and would have stopped in exactly the same place. Mode.sbx is the fix's test and a program worth having on its own: forty columns or eighty, whichever the screen is not in, which is what a person wanting Snake drawn twice the size actually needs. Ten instructions and no data, deliberately - it prints its two digits a register at a time rather than from a string, so it stays the smallest shape a loadable program can take. Nothing else on that disk had ever been that shape, which is why nothing had ever tried it. Reported by the user, who wrote the program. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
373454ec00 |
A fresh disk for every test, fixtures included
A fixture built by makedisks.sh was handed to each test where it lay. Twenty four tests name disks/cosmos.img and several of them write to one, so a test could hand the next one a disk with its leavings on. romBoot is what found it. Its recorded output described a directory that selfBoot had made earlier in the same run, so it passed in a full run and failed on its own - which is the worst way round for a test to be wrong, because the form nobody runs is the one telling the truth. Its recording now says "made" like selfBoot's, which is what running the same input on the same disk should always have said. Fixed as a class rather than as an instance: run.sh copies a fixture before attaching it, the same way it already removed a scratch image. Then every one of the 138 run and rom tests was run on its own to see whether anything else was leaning on what ran before it. Nothing was, before or after. Also, cosmosEditKeys.in was written by Python's write_text, which encodes as UTF-8, so every key byte was 0xC2 and then the key. The test passed anyway, because the shell ignores a byte it has no use for - a fixture working for a reason it was not built on, which is exactly the thing that stops working without anybody touching it. Written as bytes now; the recording is unchanged, which is the proof the stray bytes were being ignored. docs.sh is what caught that, and it turns out to draw the line in the right place by construction: a deliberately binary fixture does not decode as UTF-8 and is skipped, while one that is accidentally UTF-8 decodes and is reported. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
736037462e |
The shell edits the line it is given
Three different things used to do this job, and which one you got depended on where the machine was running. On a terminal the host held the line and did the echoing and the backspacing; behind a window the console's own gatherer did it; from a file nothing did it at all. One job, three implementations, none of them in the system - which is why there was no way to move about in a line and nowhere for a history to live. So editLine does it. Key mode while a line is being read and line mode straight after, so nothing else in the system and no program calling osReadLine notices anything changed. Left and Right, Home and End, Backspace for the character before the cursor and Delete for the one under it, and anything typed goes in where the cursor is with the rest of the line moving along. Ctrl-D means the end of input again, on an empty line, because that was a thing the terminal did while it was holding the line and it is not holding it now. Same trade as the echoing. MOST KEYSTROKES DRAW NOTHING BUT THEMSELVES. A character typed at the end of a line needs no cursor moved: printing it is the whole change, and a backspace there is three ordinary bytes. That matters beyond speed - moving the cursor by hand is what a terminal is TOLD about, in an escape sequence, so redrawing on every keypress would fill every recorded transcript in this suite with them. The line is only reprinted when something happened in the middle of it. Where the line STARTS is worked out backwards from where printing ended, rather than trusted from what was remembered. That is what makes it survive the screen scrolling: a line printed on the bottom row moves everything up by one, and a remembered row would be one too low from then on. The command line holds 127 characters, up from 63. The limit started to be felt the moment a line could be moved about in. 58 recordings changed, and every one of them by the echo. THE PROOF IS NOT A HEURISTIC: a CosmOS built with the echo silenced reproduces 187 of the 188 recordings byte for byte. The one exception is cosmosTyped, the backspace test, where the rub-out marks now come from the shell instead of from the console's gatherer - same marks, different author. cosmosEditKeys is the new test, and every line in it is typed wrong and then corrected with a different key. Its last line is eighty six characters at a prompt in column two on an eighty column screen, so the line runs onto the row below and the shell has to find the start of something it can no longer see; breaking either half of that arithmetic fails it. Also: agree.sh looked for "> the same", anchored to a prompt that no longer precedes what a command prints. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
b3726c950a |
Deliver the keys that are not characters
An arrow key has never reached this machine. Voyager threw it away for want of anywhere to put it, and a terminal sent ESC [ A, which arrived in the middle of whatever was being read and made it unrecognisable - typing Up at the CosmOS prompt put three bytes in the command line and got "I do not know". So the console names them: one byte each, 0x80 upward, above ASCII so nothing written before them can collide. Up, Down, Left, Right, Home, End and forward Delete, with room above for the paging and function keys. The console normalises, which is what it already does. Behind a window it turns the key somebody pressed into a byte; on a terminal it turns the sequence into the same byte. That is the act it has always performed on Return and Backspace, one layer further along, and it is why a program need not know which of the two it is talking to. What a key MEANS is not the console's business - that belongs to whoever is reading, the same way what is on a disk belongs to the system and what a drive is belongs to the machine. Translated only when standard input really is a terminal. Nothing else sends these sequences, a pipe holds exactly the bytes somebody put in it, and it keeps the Escape-or-Up timing problem out of every test here: a test writes the key values themselves. Line mode drops them, in both front ends, because line mode delivers characters and a line somebody else has finished editing cannot be moved about in. Press.sbx says what it was handed, in hexadecimal and by name, and reads a line before it reads keys so both halves of that rule are checked. Two recordings, one fed as standard input and one as a keyboard, agreeing byte for byte; each break fails exactly one of them. Three checks in terminal.sh type real escape sequences at a pseudo-terminal, which is the only place they are ever read as sequences: that they arrive as keys, that Escape alone is still Escape, and that a character typed straight after an escape is held rather than swallowed. Five recordings re-blessed for Press.sbx appearing on the shared disk, and the whole of that diff is the file's own line and the counts above it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
2a29cebc6b |
Make the screen come back on the machine people actually run
Found by running it: Grid exits and the shell prints its prompt into the grid, with the view up to seven pixels out of alignment. Three faults, and the first is the one that made the other two visible. MAKE RUN-VOYAGER HAD NO SCRATCH DRIVE. It gives drive 1 to Disks/personal.img, which is a file and not volatile, so there was nowhere to keep a screen - osTakeScreen answered no and the whole feature silently did not happen. It was tested with --ram-disk and shipped without one, which is as good a description of testing the wrong machine as I can write. There is now a RAM disk in drive 2, after the personal disk so that drive 1 stays the one that is yours. A PROGRAM TOLD NO MUST COPE. A refusal is not a fault, it means doing what the program did before there was anywhere to save a screen. Grid deleted its own tidying up when it started asking, so being refused left the grid on screen with a prompt written into it. It clears up again when refused, and only then. AND THE SYSTEM ALWAYS LEAVES THE SCREEN USABLE. The fine scroll registers go back to zero at every program exit, whether or not the picture could be saved: the console draws in whole cells, so a view three pixels into one puts every character three pixels out for ever. That is not part of saving a screen and should never have depended on it. Both paths are checked now. With a scratch drive the screen comes back cell for cell; without one, no grid is left behind. Breaking either fails one of them and not the other. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
ab72443b99 |
Give the screen back: osTakeScreen, and the RAM disk earns its keep
A program that takes the whole screen leaves the shell a blank one, and
whatever was on it is gone. There was nowhere to put 48K of video memory on
a machine with 64K of Data Memory that CosmOS already lives in.
A DRIVE MADE OF MEMORY IS SOMEWHERE. The screen goes to a file on the
scratch drive - the first volatile drive found at boot - like any other
file, and comes back from handleExit alongside the vectors and console mode
already put back there. The filesystem does the allocating, so this
invented nothing: it is 196 pages of tiles, map and palette, with a block
on the front holding the cursor, the four scroll registers and the mode.
NOT AUTOMATIC, and that is the whole design. Saving on every program start
would be cheap enough; restoring on every exit would be wrong, because dir
and Files and Say print and stop and their output is the reason you ran
them. A program says it took the screen, and one that says nothing behaves
exactly as every program did before this existed.
It deleted thirty lines of Grid, and they were all wrong anyway: four
scroll registers put back by hand, the map filled with spaces, the cursor
sent home, palette bank 0 written out - and the other fifteen banks kept
Grid's colours, because there was nowhere to have kept the real ones. Grid
is 64 bytes smaller and gives back what was actually there.
The check compares the screen before against the screen after, CELL BY
CELL, and allows only the rows around the cursor to differ - found from
where the text ends rather than guessed at, because the first version
assumed the cursor was near the bottom of the screen and let three real
differences through.
Two things cost time and neither was the feature:
- An edit adding "SWI osTakeScreen" to Grid was in the same script as a
failing s.index, so the file was never written - and the COMMENT
describing the call did land, from a later edit. Grid documented a call
it did not make, and read as though it should have worked.
- docs.sh caught osTakeScreen having no row in the services table, which
is the check the service layer added for exactly this and the second
time it has earned itself.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
04f1ffabd4 |
A disk made of memory, brought up by whoever owns it
THE MACHINE SUPPLIES BLOCKS AND SAYS WHAT A DRIVE IS. It says nothing about filesystems, which is what leaves room for a system that would rather have its own - and is why the volatile bit is a fact about the hardware rather than a promise about SBFS. 0x26 what the selected drive is: bit 0, contents do not survive 0x27, 0x28 how many blocks it has --ram-disk N a drive of N blocks with memory behind it A drive of memory selects, reads, writes and has a size like any other, and a program cannot tell the difference except by how fast it was. The one thing it cannot work out for itself is that the contents are volatile, because an empty disk and a volatile disk look identical from outside. THAT BIT IS THE DIFFERENCE BETWEEN A DRIVE A SYSTEM MAY FORMAT ON SIGHT AND ONE IT MUST NOT. CosmOS formats a volatile drive it cannot read, because there was never anything on it to lose, and leaves every other unreadable drive alone - an unformatted floppy is not an invitation, it is a blank floppy. Removing that check formats somebody's blank disk, which is checked rather than asserted: cosmosBlankDisk boots with one and requires it to be refused. So CosmOS grew a format. The size comes from the drive rather than from a superblock, since a superblock states a size too and that is no use on a disk which has not got one yet. Sixteen directory blocks, 128 names, chosen rather than worked out: a scratch disk runs out of names long before room, and this machine cannot divide. The RAM disk is no faster on this emulator by default, and that is honest rather than disappointing: the emulated disk has no seek time unless asked for one. With --disk-cycles 10000 the same copy is 7.94M cycles against 8.70M, the difference being every write. run.sh takes "ram:2048" where an image name goes, which needs no removing between runs because there is nothing to remove. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
6b51d6391f |
A beat a program sets for itself
The only regular thing on this machine was the screen finishing a frame, sixty times a second and not negotiable - a clock a program BORROWS rather than one it sets. Every duration became a multiple of 16,667 cycles, so a sixteenth note at 120 beats a minute, which is 125,000, is seven and a half frames and cannot be asked for at all. The way round it was to choose a tempo whose subdivisions happen to land on whole frames, which is making the music fit the machine. Examples/tune.asm says so in its own header. 0x50 Status: a period went by, it is running, it will interrupt 0x51 Control: run, repeat, interrupt 0x52-0x54 The period, in cycles, most significant first THE PERIOD IS IN CYCLES because that is what everything else here is counted in - the cost model counts them and a frame is measured in them - so a timer counting anything else would be a second unit to remember. Twenty four bits reaches from one cycle to sixteen and a half seconds, with 120 beats a minute at 500,000 in the middle, and there is no range left for a prescaler to buy. Starting loads the period; asking it to run while it already is does not, so turning interrupts on half way through a period does not silently move the beat being kept. What is left over carries into the next period, so a period of 1,000 ticks every 1,000 and not every 1,000 plus however late anybody looked. Reading the status takes the tick down and the line with it, which is the rule this machine settled two days ago about every status port. The timing check is in terminal.sh and not the manifest, and the reason is worth keeping: settle() strips cycle counts from recordings, which is right for every other program and useless for a clock. "It printed eight dots" would pass on a timer that fired them all at once. terminal.sh measures that eight periods of 125,000 come to a million within a couple of hundred cycles, and that 99.97% of them were spent asleep. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
3e48e9690d |
Put a disk of your own in drive 1
make run-voyager and make run-cosmos now attach Disks/personal.img as the second drive. It is made the first time it is wanted and then left alone: a rule with no prerequisites, so make never looks at it again. NOT UNDER build/, and that is the whole point. Everything else in this repository is made from source and can be thrown away without losing anything, so 'clean' empties build/ without a thought - and a disk of your own that a clean deletes is not a disk of your own. It is the one place here where something MADE ON THE MACHINE can live, which starts to matter the moment there are tools on it that make things. Disks/ is in .gitignore for the same reason: what you make on the machine is yours and not the repository's. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
e4f4bae762 |
Work across two disks: copy between them, and run a program from one on
files from the other Two things anybody expects of a second disk, and each needed something different. COPYING NEEDED TWO THINGS TO REMEMBER A DRIVE. The write stream is the only thing here that lives across service calls, so it is the only thing whose drive can change underneath it: every osFileBlock names its source path again and goes back to the source drive, and then osFileWrite has to come home. It records the drive it was opened on and returns there. And the file lookup CACHE. It keeps the last path resolved so a reader walking a file does not re-walk the directory for every block - and skipping the walk skipped the drive the path named, so block one of a cross-drive copy read the source's block numbers off the DESTINATION disk. It only showed on files of more than one block, because a file of one is never looked up twice. One block worked and two did not, which is a suspicious enough shape to have suspected sooner. RUNNING A PROGRAM FROM ELSEWHERE NEEDED A THIRD PLACE TO LOOK, and two restorations. The shell tried where you are and /Apps on the disk you are on. It now tries /Apps on drive 0 as well, which is what makes the system's programs work from a disk of your own - one with your files on it and no system, which is most of the point of having a second disk. The drive goes back after the load, because by then the program is in memory and the blocks it came from mean nothing; and again when it exits, because a program that copies between disks moves the drive as its own paths need to and being left wherever it finished is not what was asked for. Copy 1:/a 0:/b now leaves you exactly where you were. The fixture disk grew an /Apps, because it kept its programs at the root and so could not exercise the third place at all. Two hours of the debugging above were spent on a stale disk image. The machine boots the system that is ON the image, so a rebuilt cosmos.bin means nothing until the image is rebuilt too - and the trace said my new code never ran, which was true. Third time this project has been misled by one. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
4cc6393f5b |
Name a drive in a path
"1:/notes", or "1:" on its own for wherever that drive already was. Done in sbfsWalk, which is where every path in the system arrives - eight callers between the shell, the config reader and the filesystem - so it works for anything that takes a path rather than for whichever commands somebody remembered to change. NAMING A DRIVE GOES THERE AND STAYS THERE. Switching for the length of one command and switching back reads better and cannot work: a path resolves to a start block and a length, and those mean nothing without the drive they were read from. A load that resolved on drive 1 and then read its blocks on drive 0 would read the right blocks of the wrong disk. A name beginning with a digit is still a name. The colon is the whole of what tells them apart, and /2things is on the fixture disk to keep it that way. Two bugs, and the second is the interesting one. SUB sets carry on a BORROW, so a character below '0' leaves it set - and the test for "not a digit" branched on clear. Every prefix was ignored. Then the leading-separator test reads the first character through DP0, which sbfsPathDrive could not move because RET puts DP0 back the way it found it. It advanced SbfsPathAt and DP0 still pointed at the digit, so every prefixed path was judged relative and walked from the named drive's working directory. IT ONLY SHOWED WHEN THAT DRIVE WAS STANDING SOMEWHERE OTHER THAN ITS ROOT, because a relative walk from the root is an absolute one - so "cd 1:/2things" worked from a fresh boot and failed after "cd 1:/notes". The test does it in that order for that reason. Copying between two disks is still not one command: each path resolves on its own drive and the drive stays where the last path left it. That wants Copy to change drives between blocks. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
5644c24113 |
CosmOS knows about all four drives
A mounted disk is EIGHT BYTES - where its directory starts, how many
blocks it is, how big the disk is, and where you are on it. They now sit
together in the data segment, and changing drives is one copy out and one
copy in. The other three thousand lines of filesystem go on reading the
same four names they always have and never learn there is more than one
disk, which is the whole reason this was affordable.
The version is not in the record. It is checked at mount and thrown away,
because a version one disk's zero parent already reads as "in the root".
Every drive is mounted at boot: the controller says how many are plugged
in and each is tried in turn. One with nothing in it, or a disk this
cannot read, is left unmounted rather than stopping the others, so a
machine with a good disk in drive 0 and a blank in drive 1 starts.
'drive' says which one, 'drive 1' goes to another, and the working
directory goes with it - where you are on a disk is part of which disk you
are on. A drive the machine has not got is refused, and refused
differently from one that is there with nothing readable in it.
Three things the assembly caught me on, all the same misunderstanding of
what survives a call:
- OR reads A and B, and the bit came back from sbfsDriveBit in Q, which
RET does not disturb - but RET does put A back. The mounted mask never
got set and drive 0 was reported unmountable.
- MVQA then RSTA throws away the copy it just made, so doubling a bit
doubled nothing. SHL does it in one instruction, because A and B are
one register to it.
- There is no move from A to B. INB reads a port straight into B, which
is what the drive count comparison wanted.
run.sh takes more than one image now, separated by a plus, since the
machine has four drives and a test that could only name one could not
check any of this.
The buffer note is forgotten on a drive change and that is DELIBERATELY
kept although nothing can currently reach it: only the file read-ahead
consults it, a directory scan does not, and finding a file requires a
scan which overwrites the note on the way past. Two disks were built with
the same file at the same block to try to catch it and the answer was
right either way. Three instructions to hold an invariant rather than a
story about a bug - and the comment says so instead of claiming a fix.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
b1538e0618 |
Give the disk four drives, behind one controller
SEVERAL DISKS ARE ONE CONTROLLER AND NOT SEVERAL DEVICES, and the instruction set decided that rather than taste. A port is an immediate byte inside the OUT that names it - portOut takes it from Program Memory - so a program cannot compute one. "The disk on port 0x20 plus drive times four" is not something this machine can say, and two disks as two devices would mean a branch on the drive number in all eleven places sbfs.asm names a disk port. A drive register is what a floppy controller has always been. 0x24 Drive, which the block, command and status registers refer to 0x25 Drives, read only: how many are plugged in --disk given more than once fills them in order. What is per drive is the image, its size and its write protection; the block register, the status and the one buffer belong to the controller, which is the same division real hardware makes. A drive that is not there is refused rather than wrapped, because wrapping means a program asking for a drive this machine has not got quietly reading the one it has - the same shape of fault as taking a bank number somebody else was using. An EMPTY drive is a different thing and is selectable: a controller has its drives whether or not there are disks in them, and reading one fails with the error bit the way an empty drive should. Changing drives finishes whatever the one being left was in the middle of. A transfer waits for the clock, so one may be owed at any moment, and running it against the disk that is arriving would be a fault with no owner. Also stops parseOptions setting its defaults field by field. It was nine assignments beside a struct, and a list beside a thing drifts from the thing: adding two fields left them holding whatever was on the stack, so a machine given one disk was told it already had four drives. It is one zeroing now, and a default that is not nought can be written under it where it reads as the exception. That struct growing a field once before left Voyager linked against an object that disagreed about its size. Nothing in CosmOS uses any of this yet. The mount record is next. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
3b650cabcd |
Grid took the disk's bank number, and gave the screen back untidy
Found by playing with it: after running Grid, the shell could not start anything by name and dir said the disk was empty. Several commands after the program that did it had exited, and nothing had said a word. BANK NUMBERS ARE ONE NAMESPACE FOR THE WHOLE MACHINE. Grid registered video memory as bank 3, which is the number CosmOS gives the disk's buffer when it mounts - and that does not fail, it succeeds. Every read the filesystem made afterwards came out of video memory. Grid uses 4 now, and the CosmOS README has a table of who owns what, because the one place this was written down was a line in a service description about sbfsMount. Nothing hands bank numbers out and nothing refuses one that is taken. If programs start wanting banks routinely, a service that allocates them is what should exist rather than a longer table - noted there rather than built, since one program wanting one bank is not yet a system. Also puts the cursor home on the way out. The map was emptied and the console was not told, so the shell carried on writing from wherever the cursor had been standing when Grid started - twelve rows down a screen with nothing on it. Clearing is what homes a cursor and it costs one write. The regression test runs a program by name, then Grid, then the same program again; the second one is the check. Putting Grid back on bank 3 fails it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
1aa45fcfc4 |
Grid: fill the map, not the window
Scrolling sideways walked off the end of what the program had filled, so the grid went blank for six seconds and then came round again. A map row holds 128 cells - 256 bytes at two a cell, whatever mode the screen is in - and an eighty column screen shows eighty of them, so 48 were empty. This is the third thing this loop has counted and the first right one. It said forty, which filled half the screen. Then it asked the screen how wide it was, which fixed what could be seen and was still wrong. ASKING THE SCREEN IS RIGHT FOR FILLING A SCREEN AND WRONG FOR FILLING A MAP: a program writing one screenful wants the window, and a program that scrolls wants everything the window can be moved over. There is no register for that because it is a property of video memory rather than of the display. The check that should have caught it did not, and that is the more useful half. periodic.py looked at 32 pixels - four cells at the left edge - so it could not see a gap that was on the right, and at the cycle count it samples the origin had moved to column 22 and the gap was off in the middle distance. It reads the whole scanline now and says which column the picture stops repeating at, which is how the two failures above were told apart. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
bcd42e75ca |
Scroll the screen sideways, and by less than a cell
The screen could move one way, a cell at a time. Three registers were missing and this adds them: a column origin so the map can be wider than the screen as well as taller, and a pixel remainder for each axis so the step can be one pixel rather than eight. 0x36 Scroll column, in cells, wrapping at 128 0x37 Fine X, 0 to 7 pixels 0x38 Fine Y, 0 to 7 pixels FINE DOES NOT CARRY INTO COARSE. Writing 8 to a fine register writes 0, because only its low three bits mean anything. The alternative was for a write of 8 to step the coarse register, and it was rejected for one reason: a program that scrolls has to know where it has got to, and if the hardware carries then the only way to find out is to read the register back. Keeping them apart means the program already knows, because it did the arithmetic itself. It is also what the machines this one is pretending to be did. The renderer now draws one more row and one more column than fit and clips them, because with a fine offset the screen no longer begins on a cell boundary and the cells at two edges are partly off it. videoPutCell follows the column origin as it has always followed the row - a caller means a cell of the SCREEN, and the screen is a window onto the map. The fine offsets are deliberately not applied there: they move the finished picture by less than a cell, and there is no such thing as less than a cell to write into. So a program may scroll to any pixel without the console's idea of where row three, column five is moving underneath it. Grid now scrolls diagonally, a pixel a frame, in four port writes and two carries. It moved eight pixels every fourth frame before, which reads as the picture jumping rather than travelling. Seven checks, each one the same program with one register changed, so what is compared is where the picture stopped. Breaking fine X, fine Y, the column origin, the three-bit mask, or the console's use of the origin each fails exactly one of them. Grid's own two checks had to be rewritten, and the reason is worth keeping: they asked whether pixel 4 was a grid line, which was really a check that the scroll happened to be at a cell boundary. A picture that moves a pixel a frame can only be asked things that are true at every offset - that it repeats every eight pixels, and that one band of eight rows holds different colours from the next. Also repairs docs.sh, which found the minimal CosmOS application by taking the first asm block in the README. Documenting a program with an example above it made that a different block, and the check complained that the minimal application had no #Base about something that never claimed to be one. It looks under System Services now. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
848103f5e4 |
Grid: ask the screen how wide it is
It said forty and filled exactly half of an eighty column screen. CosmOS asks for the wide mode when it starts, because its own help text is seventy-four characters across. So a program that assumes the shape the MACHINE wakes up in is wrong about the shape the SYSTEM is running in - and the Programming Manual says as much where it describes the columns and rows registers: how big the screen is, is asked for rather than assumed. Port 0x32 says. One instruction, and the program now fills whatever it is given. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
1a8a5efe03 |
Grid: the first program to use the screen as a screen
Everything drawn on this machine so far has been text or a bitmap. The tile
engine has been there since the screen was built and only the console had
touched it, and only ever to put a letter in a cell - the one thing it can
do that a plain character display could do too.
Grid redefines a tile, fills all 128 map rows with it, and scrolls by
writing ONE BYTE A FRAME. Nothing moves. The rows above and below the
screen are already drawn, so a screenful of movement costs one OUTA and the
rows that leave the top are still there.
Its tile goes at 200 because the machine wakes with the font in tile memory
- glyph n at tile n, for 135 of the 256 - so a program starting at zero
paints over the alphabet and the shell it is about to hand the machine back
to. Its sixteen colour bands are one tile and not sixteen: the attribute
nibble is added to every index in a cell, so the same 64 bytes come out in
sixteen colourings.
Three things it cost, all of them the same lesson about this machine:
- "SETD.0 X" then "STD.0.1" stores through DP1, which had not been set
yet. It assembles, and the blit then reads its 64 bytes from wherever
DP1 was last left, so the tile came out as noise.
- The palette entry for scheme n is at 0xFC00 + 64n, which reaches
0xFFC0 - four pages, not one. And doubling A by adding B needs B to
hold A, which RSTB is the opposite of. Both went away by writing all
256 entries in order and letting the controller step the address, so
nothing computes an address at all.
- The screen it hands back had the right cells and the wrong colours,
because restoring the map is not restoring the palette.
That last one is a gap in the machine rather than in this program, and is
written up in the CosmOS README. The console's colours live at exactly the
entries the attribute nibble lands on, so any program using the nibble
overwrites them and has nowhere else to write. Grid puts bank 0 back - grey
on black - and leaves the other fifteen. The real answer is a command to
the screen meaning "give me back what you woke up with", the way the
console has one for clearing. There is not one, and this is the first
program that ever wanted it.
Two checks in video.sh, which boots the whole system and reads the pixels
the renderer produced rather than trusting what the program believed.
Breaking the tile fails one and breaking the attribute fails the other.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
0e0731e2b1 |
Put the cursor home when the screen is cleared
A screen with nothing on it and a cursor half way down it is not a cleared screen: the next thing written lands where the last thing happened to leave off, at a position whose meaning was just erased. The shell's clear did exactly that, and left the next line one row below wherever it had been. Both halves were missing. consoleClearScreen blanks the cells and does not touch cursorRow or cursorColumn, and 2J on a terminal empties the screen without moving anything - H is what puts the cursor at the top. Life and Snake never showed this because they follow their clear with an explicit 1;1H of their own. They were working around it, which is why the bug survived until a command cleared the screen and then let somebody type. The attribute is deliberately not reset. Clearing is about what is on the screen rather than how the next thing will be drawn, and a program that chose a colour and then cleared still wants that colour - which is what a terminal does too. Two checks in video.sh, and they took two goes to make independent. The first pointed at the row where the letter lands when the cursor is NOT homed, so removing the clear and removing the homing failed the same pair and neither said which. The second now looks at a row nothing writes to either way - and at a letter whose ink actually reaches the pixel it reads, which "two" did not, so it passed on a screen that had never been cleared. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
553882d28d |
Start CosmOS with a script, and let a script hold its tongue
Three things scripts wanted, and they are one thing: a machine that can have a face. /System/Boot/startup.sh runs before anybody can type. Every way of reaching the prompt for the first time goes through it, including the one where there is no disk - in which case there is nothing to find and nothing is said. A MISSING one is ordinary and silent, because a clean install has none and a machine that complained every boot about a file nobody wrote would be teaching its owner to ignore it. One that is THERE and does not begin with #! is the other case entirely: somebody meant that to run. #quiet stops each line being echoed, #loud puts it back. The prompt and the echo go together, because together they are what makes a script look like typing, so a quiet script gets neither and what it prints is all that appears. A nested script inherits quiet - a build that asked for it meant its helpers too - and gets its own setting back when the helper returns. Anything else beginning with # is handed to the shell, which does not know it and stops the script, because a script that asked for something this shell cannot do should not carry on as though it had been given it. clear empties the screen, which the console has been able to do since before there was a screen to do it on. THE PROMPT IS NOW SAID BY WHOEVER SUPPLIES THE LINE. It used to be said at the top of the loop, which is a decision made before the line is read and an answer not known until after - and it was wrong at both ends. #quiet is itself a line, so its prompt went out before anything knew to stay silent; and the line after a quiet script's last one comes from the console, having already been denied one. Off by exactly one line in opposite directions. A first attempt at this remembered whether the prompt had been skipped, which worked and was a flag standing in for a structure. The monitor's assembler prints a prompt of its own, so it reads through shellReadRaw, which is the same source without one. One admission. Handing the console its prompt back when a quiet script ended was a real fix when I wrote it and stopped being one an hour later, because the restructure above means the console's own path prompts whatever the flag holds. The comment claimed it fixed something. Breaking it on purpose changed nothing, which is how that was found, and it is now a comment saying so instead of a line pretending to work. The startup fixture ends QUIET on purpose: nothing puts the flag back when the outermost script finishes, so a script ending #loud would have tested the easy half. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
c28826df77 |
Let a script run a script, four deep
A build script calling a setup script is the first thing anybody tries. What is saved when one script starts another is A POSITION AND NOT A BUFFER: the name, which block comes next, how many are left, and where in the block it had got to. Seventy bytes, and they sit next to each other in the data segment on purpose so that saving them is one copy. The block itself is read again on the way back, which costs one disk read per return and saves 257 bytes a level - the inner script reads its own block into the single buffer there is, so coming back means fetching the outer one's block again and landing on the byte it left. The slot is reached by stepping rather than by multiplying, because this machine has no multiply and the depth is never more than three steps. Four levels. Deep enough for a script calling a script that calls a helper, shallow enough that a script running itself says so rather than filling memory. A line that fails now stops every level and not just the innermost, because a build whose helper failed should not carry on in its caller. The caller's place is saved BEFORE the new file is looked at, and put back on every way out that is not success. Opening writes the name into the live state in order to ask the disk about it, so by the time "there is no such file" is known, the caller's place has already been overwritten - a failed 'do' inside a script would otherwise leave the script that ran it reading from a name it never chose. The test resumes in the outer script's SECOND block, which is the case the whole design turns on and the one an ordinary nesting test would miss. Breaking the re-read, the save, or the limit each fails it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
a12d61fb80 |
Give the shell an echo, so a script can say what it is doing
Say.sbx has printed words since long before there were scripts, and is the wrong shape for one. It is a program: it has to be found on the disk, loaded and started, it prefixes what it was told with "it says:", and the system prints "finished" after it. Three lines of noise around one line of narration, and a load off the disk to produce them. echo is a command, so it costs a comparison. With nothing after it, a blank line - which is what anybody expects and is worth having to space a long script out. Not called "say", although that is the better word. Built-in commands are tried before the disk and always win, so a built-in say would shadow Say.sbx and quietly change what every existing script and test meant by it. Also puts "do" in the help, which the commit that added it forgot, and splits the help text: the new lines pushed it over the assembler's 255 character limit for one string. That failure was hidden for a few minutes by a 'make' whose errors were going to /dev/null - the build kept the disk it already had, and the machine cheerfully reported "I do not know: echo" from a system assembled before echo existed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
2466d79d9c |
Let the shell run a file of commands
'do <file>' runs the lines in a file as though they had been typed. The
only thing a script changes is where the next line comes from: everything
below shellReadLine - splitting the line, matching it, loading a program -
cannot tell the difference and does not have to.
What makes a file a script is '#!' on the front of it, not its name and not
a flag in its entry. The rule this filesystem keeps is that an entry holds
only what the content cannot say about itself, and a script can say what it
is; the loader already refuses anything that is not SBEX, so the two kinds
of runnable file turn each other away without either knowing about the
other. It is also the deferred half of the file-typing design, which said
to wait for a second kind of runnable thing before building any of it. This
is that second kind.
'#' is a directive and ';' is a comment, as in SplitBit assembly - one rule
across the machine rather than two dialects. Not Unix's convention: there
'#!' really is a comment that only the kernel reads, while here the shell
requires it and refuses the file without it, so calling it a comment would
be a lie about what it does.
A script stops at the first line that does not work, which is what the
LineFailed groundwork was for. Comments and blank lines are dropped by the
reader rather than by the dispatch, so they are not echoed either. A script
running out hands back to the console rather than ending the shell, because
running out of file and running out of typing are not the same thing. The
interactive assembler reads through the same path, so a script can contain
a block of assembly.
Three things this cost that were not obvious:
- RET puts A and B back, so a routine cannot answer in them. scriptByte
returning the character in A assembled, ran, and handed the caller its
own A back every time. It answers in memory now.
- A last line with no newline is still a line. Text files do not reliably
end with one and an editor eating it is a bad way to find out a command
did not run.
- Not LastStatus. See the commit before this one.
Six checks in three tests, two of which are about byte positions rather
than behaviour - a command lying across the boundary between two blocks,
and that missing newline - so their fixtures are generated rather than
committed, where an editor cannot helpfully repair them.
Nesting is not in yet: a script cannot run a script. That wants a stack of
positions rather than the one the reader keeps.
Also derives native.sh's self-hosting source list from cosmos.asm's own
#Include lines. It was a hand written list and went stale the moment
script.asm existed - the fourth time a list beside a thing has drifted from
the thing - so it now asks the thing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
fc56e815fc |
Have the shell remember whether a line worked
Groundwork for scripts, and invisible until there is something to read it: the suite passes unchanged, which is the point of doing it on its own. A script has to decide whether to run the next line, and nothing in the shell knew whether the last one worked. LineFailed is cleared as each line is read and set by the fourteen paths that fail. Cleared at the start rather than set at the end, because there are thirty seven ways back to the prompt and only fourteen are failures - and the twenty three successes would have to be found again every time a command grew a new way to finish. A command that says nothing worked. Twelve of the fourteen already funnelled through fileComplain, so this is fourteen lines rather than the refactor it looked like. It is deliberately NOT LastStatus, which was the obvious place and is wrong. That one is a program's own answer, reported by the status command and recorded by two tests; clearing it as each line began wiped the answer before the command that reports it could read its own line. The tests said so immediately. Two questions, two bytes - and a program exiting non-zero now sets both, because a program answering "no" is one of the ways a line can fail. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
e52d8d84f8 |
Collapse the two makefiles into one
Programs/makefile is gone and everything it did is here. The split was not paying for itself: nothing at this level ever ran that file, so it rotted, and all three bugs found in it this week share that one cause. It named two source files that had been renamed months earlier and failed outright. The disk did not depend on the tree it mirrors, so a new file silently was not on it. And the disk was in no default target, so 'make clean' threw it away and 'make' did not bring it back - which is what prompted this. The platform and the system stay separate, as TARGETS rather than as files: 'make SplitBit Assembler' builds the machine and its tools, 'make cosmos' and 'make disk' build the system, and somebody who wants to write their own system can ignore the second group entirely. That boundary is now one make enforces, which the directory boundary never did - Tests/makedisks.sh has always reached across it to build its own fixtures. 'make' now builds a bootable disk as well as the tools, because a machine with nothing in the drive does not do anything and the first thing anybody wants after building this is to watch CosmOS come up. It costs half a second: the whole system, twenty six apps and the native assembler assemble in less time than the emulator links. Two things the merge needed that the split did not. Assembling now takes an order-only dependency on the assembler, which came free when you had already built the tools before changing directory. And the mirror is told which directory to walk: it was ".", meaning Programs/, and left alone it would have meant the whole repository - the C sources, the tests and the manuals mirrored onto a disk for an 8-bit machine. The disk comes out at 188 files where it was 189. The one that went is Programs/makefile, which was itself being mirrored onto it as /Source/makefile. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
2f22807458 |
Give the demo a real tune: the Anachronaut Labs theme
The composition is the user's - a leitmotif they already have variants of, written into the note table by hand. It replaces the eight note scale that was there to prove a note could be played at all, and it is a better demo for the obvious reason and one less obvious one: it is long enough to hear whether the machine keeps time, which a run of eight notes is not. Forty five notes, 567 frames, 9.45 seconds, peaking at 19,461 of 32,767. The test budget goes to twelve million cycles, which is a duration rather than a guess: at 16,667 cycles a frame the music is 9.45 million, so there is room to add bars before anybody has to come back here. Also records what borrowing the screen's frame actually costs, which came out of writing music rather than out of theory. The frame is not too slow, it is FIXED: every duration is a whole number of 16.67 ms, so a note worth a third of a beat cannot be written, and the way round it is choosing a tempo whose subdivisions land on whole frames - making the tune fit the machine. That is the argument for the timer peripheral wanting an arbitrary tick rather than a faster fixed one, and for the screen not being the clock: a display refresh and a music routine have no reason to share a rate. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
85329f13c3 |
Take a device's line down when its status port is read
A device raises a line and something has to take it down. Two things did: being interrupted, and being woken from WAIT with the Interrupt Flag down - the second because a masked program has nowhere to dispatch to, so nobody else would. There was a third way to learn a device had finished and nothing answered it. The documented idiom reads the status, branches out if the device is already done, and only WAITs otherwise; on a disk quick enough to finish before the first look, which is every disk here, the WAIT is unreachable. The line then stood for the rest of the machine's life. The program that leaves it standing never pays for it - it was masked throughout. The bill arrives at whoever next sets the Interrupt Flag. The boot chain reads the disk to load a program, leaves the line up, and hands over; the loaded program is then interrupted on behalf of a read that finished before it existed, through a vector table with no entry for a device it never touched, and faults on the instruction after its SIF. Found by running Examples/tune.asm through Once. It set up its whole sound and died four bytes before its first note, which is why it was silent rather than wrong - and why it looked like a sound bug for a while. So reading the port that answers a device takes its line down, the same way taking the byte already took the console's down. Disk and screen do it on their status port. And a reset now clears every line, which is the sentence the manual already makes about the vector table: a handler left behind aims an interrupt into a program that is no longer running, and so does a line. testPrograms/diskLineTest.asm pins it - the racy idiom, then SIF with no handler installed anywhere. It faults without the fix. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
62a657f1a7 |
Give Voyager a speaker
The device already made the samples; this takes them out of its ring and hands them to Raylib, a sub-buffer at a time. Nothing here decides what a sound is, the same as nothing in presentFrame decides what the screen looks like - which is why the headless binary and this one make the same sound, and why the suite can check a device with no speaker in it. Asked for rather than assumed: a host with no audio device still gets a window, because a machine worth looking at should not need one to start. When the ring runs short the missing samples are filled by holding the last one rather than by zeroes. It is still a glitch; a jump to silence and back is a click, and a held level is not. Also removes a comment that had been left in twice above the frame loop. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
8366bf7721 |
Fix the Programs build, and make the disk depend on what it mirrors
Two faults, both introduced by
|
||
|
AnachronautandClaude Opus 5
|
d388cd3122 |
Give the machine a sound device
Four channels on ports 0x40 to 0x4F, each one a whole soundThing voice:
two oscillators, two envelopes, a filter and the routing between them. A
channel keeps its patch between notes, so a program sets an instrument up
once and then plays it.
Six ports rather than forty, because a voice has around forty settings and
four of them would spend more than half the port space on one device.
There is a selector and a value instead: say which channel, say which
setting, write it. That is three writes to change a setting and two to
play a note, which is the right way round - patches are loaded, notes are
played in an inner loop.
Samples come from the machine's clock and not the host's: 48,000 a second
of emulated time, worked out in whole numbers so it never drifts. A
million cycles is exactly 48,000 samples on any host at any speed, which
is what makes a sound something a test can compare. --sound writes them
out, the way --screen writes a picture, for the same reason: the suite has
no speaker.
Tests/sound.sh is 22 checks and found three real defects the first time it
ran, all the same shape - a synthesizer written for a patch editor, wired
up as hardware and inheriting the editor's assumptions:
- Only one voice had an oscillator switched on, so three of the four
channels could not make a sound whatever was written to them.
- That voice's oscillator arrived at full gain and every other one
arrived at nothing, an asymmetry with no reason behind it.
- A note with no sustain is silent but not over, so the obvious way to
wait for a sound to finish waits for ever.
The first two are fixed by the device defining its own power-on state
rather than inheriting synthInit's: every channel arrives able to make a
sound, so writing a note number is the whole of playing a note. The third
was already written into the manual as advice, an hour before the check
existed. The check disagreed with the documentation and the check was
right; the manual now says the one rule, which is that a note sounds until
the gate is dropped.
Programs/Examples/tune.asm plays eight notes, taking its tempo from the
screen's frame interrupt because that is the only regular beat this
machine has. It spends 99.8% of its cycles asleep in WAIT.
Voyager has no speaker yet - this is the device and its tests. Playing the
samples out of the window is the next commit.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW
|
||
|
AnachronautandClaude Opus 5
|
b0d06aa6e5 |
Make the vendored synth plain ASCII
soundThing's comments use em dashes and an arrow, and this repository is plain ASCII throughout because the tooling around it does not do Unicode. Tests/docs.sh caught it the first time it ran against the new file, which is what that check is for. Comments only; nothing the compiler sees has changed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
f58b0f93af |
Vendor the voice engine, with the level it always had and could not say
soundThing's synth.c and synth.h, and nothing else of it: the voice engine pulls in maths, stdlib, stdint and stdio and knows nothing about Raylib, MIDI, patches or the interface, which is what made it liftable. Copied rather than submoduled - two files against tying this build to another repository's history is not a close call - so the header carries the whole of the difference and is meant to stay current. A VOICE'S LEVEL IS A ROUTING NOW. Envelope 0 was multiplied into the output unconditionally, so routing it to a filter or an oscillator meant it shaped the volume as well whether that was wanted or not, which is most of the trouble with making percussion. There was no flag to turn that off and there never had been: Envelope is the only one of the four modulating things without an active flag, where LFO, Filter and Oscillator all have one. It could not take the filter's shape either. filterTick returning its input unchanged is the right nothing-happens answer, but an envelope returning a constant would be useless as a mod source - and being a mod source while NOT being the volume is exactly the thing wanted. So the voice names the source that shapes its level, the way every other destination names its source, and MOD_SOURCE_NONE means nothing shapes it. Two things fall out that were not possible before: envelope 1 shaping the volume, and an LFO doing it, which is tremolo. Envelope 0 still decides how long a voice lasts, because it still ticks. A voice with its level unrouted will therefore cut rather than fade when the envelope reaches idle - fine or wanted for percussion, a click if the oscillators are loud at that moment, and a one line change to end on note-off instead if it turns out to matter. NOISE COMES FROM A SEEDED GENERATOR, one to each thing that makes it. rand() is global state shared with the whole process and varies between C libraries, so the same program sounded different on different machines and no recorded result could have meant anything. One generator each rather than one shared, because two noise sources drawing the same stream are not two noise sources. Checked rather than assumed: two synths from the same start produce identical samples, and 4,617 of 4,800 of them are non-zero, so it is noise and not silence. AND A CHANNEL IS THE CHANNEL YOU ASKED FOR. synthNoteOn hunts for a free voice and steals round-robin, which is what a keyboard wants and what the standalone synthesizer still does. Channel two is channel two. Both old calls are untouched. Nothing links it yet. It compiles clean and standalone under -std=c11 -pedantic, which is what make strict already checks, and the 169 tests are unmoved because nothing calls it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
33afc20abc |
Give the memory controller to a bus rather than to the machine
The third and largest piece of the peripheral core, and like the two before it nothing changes: 169 tests, and the two that would notice a misroute pass loudest of all. A CONTROLLER IS THE MOST STATEFUL THING ON THIS MACHINE - a source bank and address, a destination, a length, five guard registers and a table describing every bank it can reach. Two processors sharing one would interleave into nonsense: one sets a source, the other sets a destination, the first issues a blit and moves the wrong bytes somewhere else again. No arbitration fixes that, because there is nothing to arbitrate - both writes were legal and the result belongs to neither of them. So it is a struct threaded through all seventeen functions that touch it, rather than a pointer to a current one set on the way in. The smaller change was tempting and is the shape that produced the stale reset flag and the editor's IsNew surviving a second run, both this week: state that has to be set on the right path before anything reads it. A controller is where that goes wrong quietly rather than loudly. THE STATICS WERE DELETED RATHER THAN LEFT, which is what made this safe to do mechanically. A missed reference is a compile error rather than a variable that still exists and serves the wrong core, so "did I catch all 165?" stopped being a judgement and became a question the compiler answered. Two things the transformation nearly got wrong, both caught by reading rather than by building. guardStart and guardEnd are fields of Bank as well as registers of the controller, so banks[n].guardStart had to keep its name while a bare guardStart changed - the difference between a fence and the register about to be written into one. And a definition and a call look alike enough that the first attempt turned publishBank(number) into publishBank(Controller *c, number); definitions start at column zero here and calls never do. Tests/agree.sh is what says this is right, more than the count does. It builds the same disk with SplitDisk and with CosmOS and compares byte for byte, and every filesystem operation on the machine goes through the controller - so a blit that went to the wrong place would corrupt a disk that is checked against one built by different code entirely. Tests/cycles.sh covers the other half, since what a transfer costs depends on pendingCycles landing in the right one. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
5be5bea994 |
Make the interrupt lines belong to a bus rather than to the machine
The second piece of the peripheral core, and like the first it changes nothing: one array of bits became a struct, and the machine's own devices reach it through wrappers because every one of them really is on this bus. IT WAS ONE ARRAY INDEXED BY PORT FOR THE WHOLE MACHINE. With two processors that is not a tidiness problem, it is each of them seeing the other's lines: a disk finishing would interrupt a sound core, a sound core's tick would interrupt the shell, and both would arrive at a handler installed for something else entirely. Hardware vectors are per port, so the numbers would even look plausible on the way in. Unlike the shift register, which was harmless until there was a second core to share it with, this one was always going to be wrong the moment there was one. Still to come on this rung: a controller each, since it holds the source, the destination, the length and five guard registers, and two cores setting those between each other's instructions would interleave into nonsense. Then the interleaving rule, which belongs in the manual as machine behaviour rather than as something the emulator happens to do. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
4e3258e3f7 |
Put the libraries on the disk, and say which include is missing
Sieve-16.asm, Life.asm and Fib-16.asm could be read on the machine and not assembled on it. All three #Include print.asm, and print.asm was not on the disk. /LIB WAS STILL A HAND-WRITTEN LIST. Programs/Libraries is what an #Include means when it is not a CosmOS source - print, the integer helpers, the maths - and nobody had thought to name them, which is the exact failure mirroring the sources was meant to end. It is mirrored now, so the next one nobody thinks of is there anyway. AND THE ASSEMBLER SAID NOTHING USEFUL. A missing include returned a failure and printed no message, so the catch-all at the top said "nothing was written", which is true and useless - finding out why meant reading the assembler rather than the message. It names the file now, and where it looked: cannot find print.asm, not beside the file that asked and not as /Lib/print.asm Both halves are worth having, because a name that is in neither place is usually one or the other spelt wrong. The same shape as More's "error 2": a program that knows exactly what happened, reporting a number or nothing at all. The disk also depends on the recipe that lays it out now. It did not, so adding the libraries left an image built without them and the next run reported the same thing missing - which sends you looking at the change you just made rather than at the stale thing in front of you. It cost twenty minutes to notice. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
dae3455da0 |
Give the CPU a bus, so that there can be more than one
The first piece of the peripheral core, and it changes no behaviour: the machine still has exactly one processor, and every one of the 169 tests still passes. What changes is that the code has stopped assuming so. FIVE THINGS A CPU ASKS OF THE WORLD OUTSIDE ITSELF, and every one of them was a call to a function there was exactly one of: the port handlers, what the controller spent moving memory, what was spent stopped waiting on a device, and the two that work the interrupt lines. Fine for a machine with one processor and wrong for a machine with two, because A PERIPHERAL CORE'S BUS IS ITS OWN - it sees the devices its own device gives it, raises its own lines, and stalls on its own controller, none of which are the host's. They are gathered into a Bus that the CPU holds a pointer to, rather than threaded through as a bus number, because a bus is something a device PROVIDES. A device that provides one should hand over the answers rather than be looked up by an index somebody else has to keep right. initializeCPU puts the machine's own there, which is what every processor was on when there could only be one, so nothing at any call site moved. And shiftRegister is a local now. It always was one in effect - written and read inside a single instruction and never carried to the next - but it sat at file scope, where a second processor would have shared it. Two cores taking each other's shift halfway through an SHL is a poor thing to discover later, and it cost two braces to make impossible. Still to come on this rung: the interrupt bitmap, which is one file-scope array indexed by port for the whole machine; a controller each; and the interleaving rule, which has to be written into the manual as machine behaviour rather than left as something the emulator does. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
f2e26c1852 |
Stop a pending reset outliving the reset it belonged to
Reset out of picture.bin and CosmOS booted and then halted at once, having been told there was nobody at the keyboard. The button set two things: the machine's reset request, and a flag of the window's own that said "end the next console read, so a machine blocked on a key can get to the point where it notices". The second was only cleared when the console actually asked - and picture.bin never asks. It draws and halts. So the flag survived the restart and answered the NEXT machine's first read with the end of input, which for CosmOS means stop. There is one fact and it now lives in one place. The window asks whether a reset is still waiting rather than remembering that it asked for one, so the read ends only while a restart is genuinely on its way and goes back to normal the moment it has happened. The local flag is gone. Two pieces of state meaning one thing, one of them cleared on a path the other did not need - which is the same shape as the console's line editing flag surviving a second run, a fortnight ago. Worth noticing twice. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
adefce975b |
Let the reset button reach a machine that has stopped
The gesture rebooted CosmOS and could not reboot picture.bin, which is the case it was added for. picture.asm ends in HALT, and a halted machine runs no instructions - so nothing ever reached the code that notices a reset, because a reset is noticed BETWEEN INSTRUCTIONS and there are none. It only ever worked because CosmOS was still going. Which is backwards: a machine that is not going anywhere is exactly the one worth restarting, and it is the one that cannot hear a request by itself. The restart is lifted out of the run loop into machineTakeReset, and the window asks every frame whether the machine is running or not. NAMED AS EMULATOR MAGIC, because it is. There is no reset line on this machine and no keyboard controller to assert one; the window reaches in and sets the same flag the machine port sets. When those are designed, a keyboard controller will have to see the gesture and pull reset regardless of what the CPU is doing - which is the property that matters and the one a port write can never have, since a port write needs a program willing and able to make it. The shape of that is already visible here: asking every frame rather than leaving it to the machine to notice is what a line does. A restart now clears the cycle limit as well, since a machine stopped for reaching one is another thing somebody would press the button over. The three existing reset tests still pass, and they are the ones that matter: they exercise the same restart through the machine port. What no test reaches is the gesture itself, which exists only when there is a window. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
8c6ed62044 |
Reset on a gesture the host has no opinion about
Control, Shift and R. It was Control, Alt and Delete, which brings up a shutdown prompt rather than reaching the machine - and no amount of asking will change that. IT IS A SECURE ATTENTION KEY. Every serious operating system reserves it so that it always reaches the system and never an application, precisely so a program cannot imitate a login screen. On Windows an application cannot see it without a kernel driver; on Linux the desktop takes it. That is not an oversight to work around, it is the same guarantee a reset button wants being enforced one layer further down, and there is no call this program could make that would win the argument. It is unavailable for exactly the reason it seemed right. So the requirement list grew a third item that was not obvious until it bit: the gesture has to be one the host has no opinion about. Control and Shift with a letter is about as free as a combination gets - not window management, not a virtual terminal switch, and not a shortcut any desktop claims by default. It keeps the other two properties: plain F12 and plain Delete stay free for software, and three keys are not pressed by accident. If some platform does send a character for it, nothing comes of that either. Whatever arrives is in memory that is about to be thrown away. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
0afead00de |
Make the reset a gesture rather than a key
Control, Alt and Delete, which was F12. Two reasons, and the first one is about hardware rather than about the emulator. ON REAL HARDWARE THIS IS NOT A KEY AT ALL. A Voyager has a button on the case, and what a window has instead of a case is a gesture standing in for one. So it must not be a key software might want - a machine with a keyboard has function keys on it and something will eventually have a use for F12, which would have meant taking it away again later, from programs already written to expect it. And it must not be reachable by accident. Restarting throws away everything in memory, which is the same data loss Escape was one keypress from causing, arriving by a different door. Three keys together are not pressed by mistake. It has meant this since 1981, so it is also the one gesture nobody has to be told the meaning of - and Delete stays free for software, since the gesture is all three or nothing. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
f7657081be |
Put a reset button on the case, and stop Escape closing the window
ESCAPE WAS A BUG I LEFT. This machine sends Escape to the console like any other key, and Raylib closes a window on Escape unless it is told not to - so a program reading keys could be ended by one of them, taking whatever was in memory with it. SetExitKey(KEY_NULL), and it is a byte again. F12 is the reset button. A button on the case rather than a key the machine can see: nothing sends a function key to the console, so nothing can be surprised by one. It does what writing MACHINE_RESET does, which is that the machine starts the way it started - the boot chain runs again and finds whatever the disk now says to run. Which is what makes a bare metal program escapable. Once puts a demo in front of the next start and deletes the request before jumping, so a demo that has taken the whole machine is one keypress from the system coming back, instead of closing the window and opening it again. IT HAD TO REACH A MACHINE THAT IS WAITING, and that took two more things. A reset is acted on between instructions, and a machine blocked on a key is part way through one - so the button would have set a flag that nothing ever came along to notice, in exactly the situation a reset button is for. The wait ends now: the console is told its input is over, which it is for a machine about to stop existing. And the reset puts the console's input back - nothing pushed back, no line half gathered, and not at the end of input. That was already wrong before the button existed: a reset after the input ran out left a console that had run out afterwards, so a machine could be restarted once and then never typed at again. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
13b20c8834 |
Give the screen a bitmap mode
V4. Mode 2 is 320 by 200 with a byte a pixel: no tile to look up and no attribute to add, the byte IS the palette index. Programs/Examples/picture.asm fills a whole one in 127 bytes of program and 47,498 cycles. IT IS THE SAME MEMORY AS THE TILES AND THE MAP, which is what shared video memory has always been, and there is nowhere else it could be - 64,000 bytes of picture in a 65,536 byte bank leaves room for nothing beside it. Going to bitmap mode does not clear the text screen, it stops calling it one, and coming back finds the tiles holding whatever the picture put there. Taking the screen means taking it. The palette moves to 0xFC00, the top of video memory, because it is the one thing that has to mean the same in every mode and 64,000 bytes of picture leaves nowhere in the middle for it to hide. That is a documented address, so the example, the tests and the manual move with it. A BITMAP HAS NO COLUMNS AND NO ROWS, and both registers read zero rather than a leftover from the last mode. The console asks: told there is no character screen, it has nowhere to put a glyph and draws nothing, while still saying everything down the serial line. The honest alternative is what a machine with shared video memory really does, which is scribble marks nobody can read across somebody's picture - honest and useless, since a program that has taken the screen has not stopped wanting to print. Six checks in Tests/video.sh, to 55: that the mode is 320 by 200, that a byte is one pixel's colour and only that pixel, that printing leaves a picture alone while the letter still goes out, and that the columns register says nought and then forty again. The example is worth reading for one thing beyond the mode: Fill leaves its destination past what it touched, so two hundred rows are drawn from one address set once. Working out where row n begins would be n times 320, and this machine has no multiply. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
1174bd9af5 |
Give the machine a frame to wait for
V3. The screen interrupts at each frame on hardware vector 0x30, and WAIT finally has something worth sleeping on. THERE WAS NO CLOCK. Every program that wanted to happen at a certain speed counted instructions and hoped, which is why Snake's pause silently halved the day a cycle stopped being an instruction and became a memory access - the program was right and the thing it was counting changed underneath it. A screen finishing sixty times a second is a real beat, and it is counted in the MACHINE'S cycles rather than the host's, so the same program sees the same number of frames in the same number of cycles however fast anything really ran. That is what makes a frame something a test can count and a recorded result can hold. Status bit 0 goes up when a frame has gone by and reading the status port puts it down, so a program with no handler can watch for it instead. Control bit 0 asks to be interrupted, and is OFF when the machine starts: an interrupt with nothing installed to catch it is a fault, so a screen that began interrupting the moment it was switched on would take down every program written before frames existed. More than one frame can pass between two looks, and the flag and the line are each one thing, so several still mean one of each. A missed frame is missed. Programs/Examples/frames.asm prints a dot a frame for a second: 1,000,324 cycles, and 996,460 of them spent asleep. That split is the thing worth seeing - a program that polled instead would print the same sixty dots, take the same second, and spend every cycle of it on the bus. Its header explains why waiting is not spinning and why a machine with a beat can stop guessing at one. Six checks in Tests/video.sh, and two of them are about the clock rather than the output, because the output cannot tell the difference. That the machine slept through nearly all of ten frames, and that polling three frames actually took three frames - a status flag that stayed up once set would print exactly the same character and look perfectly correct. Breaking the frame interrupt on purpose left a machine asleep for ever and hung the whole suite, which is a worse way to be told than a failing check. Tests/video.sh bounds its runs at ten seconds now, the way Tests/run.sh always has. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
3da020898c |
Write down what the machine costs, before it has to be worked out again
Three measurements that would otherwise be re-derived from scratch in three months, put where a reader will meet them rather than where somebody has to know to look. The README's cost model section says what a nominal 1 MHz actually means: about 270,000 instructions a second, since the average instruction costs 3.72 cycles. The same program therefore takes 3.72 times the wall clock it did when a cycle was an instruction - nothing got slower, the number got honest, and the number it replaced described no machine anybody could build. Beside it, the two figures that put that in proportion: the emulator runs 195 million cycles a second in --fast, and CosmOS assembling CosmOS is 654 million of them, which is eleven minutes at a megahertz, 3.3 seconds at --fast, and six and a half seconds at a hypothetical 100 MHz. That last is pessimistic rather than hopeful: it assumes hardware overlaps nothing, which is the same conservative reading the controller's cost model takes. The CosmOS README gets what that means for its assembler, which is superlinear in what it reads: 1,383 cycles a byte for a four kilobyte source, 6,290 for a hundred kilobyte one. IT IS NOT THE DISK, and the number that says so is worth keeping - 654 million on a disk carrying the whole source tree against 653 million on a flat one with a sixth as many files. The suspected cause is walking a table of some nine hundred labels once per reference, suspected rather than measured. Nothing is being done about it, and the reason is written down too: development happens with the host assembler. But faster hardware buys a constant factor and does not change the shape of the curve, so the program that forces this is not CosmOS - it is the first one twice its size. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
5732a31b2e |
Stop the allocator starting the directory again for every file in its way
Placing one file on a disk with the source tree on it cost 9.4 million cycles. It costs 1.4 million now, and assembling colours.asm went from 13.9 to 6.0 seconds. sbfsAllocate gave up the moment it found anything in the candidate's way: it moved the candidate past that one entry and STARTED THE DIRECTORY AGAIN FROM THE FIRST BLOCK. With files laid down one after another that is a restart per file, and every restart reads directory blocks off the disk until it reaches the next thing in the way - which is further in each time. Placing one file among 183 of them cost thousands of block reads. The candidate moves along DURING the pass now, and the pass carries on from where it is, so entries later in the directory are tested against where the candidate has got to. On a disk that has been appended to - which is what a disk mostly is - one pass walks it past everything and a second confirms nothing is left. Two passes rather than one per file. IT IS STILL FIRST FIT, and Tests/agree.sh is what says so: the machine and SplitDisk build the same tree and the images still match byte for byte, which they could not if allocation had started choosing differently. The argument is that the candidate only ever moves past something that genuinely overlaps it, and when it does there is nowhere below to go - the entry in the way covers everything up to its end and begins before the candidate ends. The first attempt at this was slower than what it replaced, by three times. It finished the pass and jumped to the FURTHEST overlap, which sounds better and is worse: with files laid contiguously only one entry ever overlaps, so the old early exit was the fast path and reading the whole directory to find the one thing was pure loss. The number of passes was never the thing to fix - restarting them was. The boot slot in the test fixtures goes from 32 blocks to 40, which is what a shipped disk has. Stage two is 8,231 bytes and 32 blocks is 8,192: a fixture tighter than the thing it stands in for fails on a change the real disk would have taken, and says "the boot slot is too small" rather than what actually grew. WHAT THIS DOES NOT FIX is assembling CosmOS, and that is worth saying plainly. It takes 654 million cycles on the mirrored disk and 653 million on a flat test disk with a sixth as many files, so it is not a filesystem problem at all. Cycles per byte of source climb with the size of it - 1,383 for colours.asm, about 3,000 for Edit.asm, 6,290 for cosmos.asm - which says the native assembler is superlinear in what it reads. That is a separate thing to go and look at. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
7073b972e6 |
Say what went wrong, and give the file tools room for a path
The makefile on the disk was fine. "Makefile" is not "makefile", and SBFS names are case sensitive - but neither tool said so, and both failed in ways that pointed somewhere else. MORE PRINTED A NUMBER THAT MEANT NOTHING. "cannot find the file, error 2" invents a vocabulary the system does not have: the filesystem library documents its answer as zero or not zero, never as a code, so 2 could not be looked up anywhere. It says "there is no file by that name" now, which is the only way opening fails that a person can do anything about, and is nearly always a name typed slightly wrong. EDIT SAID "0 LINES", which is also what an empty file that IS on the disk says. A name typed slightly wrong therefore looked exactly like the document you meant to open, right up until you saved it somewhere new. It says "new file" instead. Two bugs came out of writing that, and both are worth more than the feature. The first is mine and the label lied to me: loadNothing is not where a load FAILS, it is where every load FINISHES, reached at the end of splitLast on files that opened perfectly well. A flag set there on the strength of the name was set on everything. It is called loadDone now, and the failure has its own name. The second is older and general: a program is loaded once and may be run many times, so "load Edit.sbx" then "run" twice is two sessions over one copy of the Data Segment. Anything a session changes has to be put back by the session. A zero written in the Data Segment is the state a program starts in the first time and never again - and cosmosEdit runs Edit twice from one load, which is why it caught it immediately. AND THE FILE TOOLS COULD NOT ADDRESS THE TREE THEY NOW HAVE. Edit took 23 characters of name and More and Type took 29, which were right when everything lived in the root. With the sources mirrored onto the disk, "/Source/CosmOS/Assembler/classify.asm" is an ordinary thing to type - thirty-seven characters, cut down to a name meaning something else, or nothing. All of them take sixty-three now, which is what the shell reads of a command line, so nothing longer can arrive. Wander with it, since a directory is a path too. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
0852666e73 |
Mirror the source tree onto the system disk
A list of files in a makefile goes stale the moment somebody adds a program and forgets to name it, and what they forgot is invisible until they go looking for it on the machine. So SplitDisk gained a mirror command and the disk rule is one line: putting a file where the others live is now the whole of putting it on the disk. EVERY FILE GOES THROUGH put AND EVERY DIRECTORY THROUGH mkdir. That is the point of it - mirror adds a walk and no filesystem code at all, so anything the format refuses here it refuses everywhere, in the same words. What is new is the walk, and the walk is what the six checks in Tests/disk.sh are about: that it goes all the way down, that it leaves dotfiles and named directories behind, and that a name too long stops it. REFUSED RATHER THAN SKIPPED, because a disk quietly missing a file is the exact failure a mirror exists to prevent. Which meant four sources had to be renamed - a directory entry holds 22 characters and they were 23, 23, 24 and 29: 16bitSegmentedSieve.asm -> 16bitSieve.asm 16bitSegmentedSieveModern.asm -> 16bitSieveModern.asm consoleInterruptTest.asm -> consoleInterrupt.asm controllerWriteTest.asm -> controllerWrite.asm The test names in the manifest are unchanged, since those are identifiers and every recorded result is filed under them. Only where the source lives has moved. The entries are sorted before anything is written. readdir hands them back in whatever order the host filesystem feels like, and a disk image that comes out different from one run to the next is an image no test could compare against another. The disk grew from one megabyte to four and from 192 directory entries to 1,024. The sources are 2,850 blocks and the mirror filled the old directory on its first run, which is a thing that should not need thinking about again. The Tests fixture disk is deliberately NOT mirrored. It is a controlled fixture with known contents, and the shipped disk is the one meant to be useful; they want different things. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
ff4b025058 |
Make the cursor blink while the machine is waiting, and show how the palette works
THE CURSOR DID NOT BLINK, and the reason is worth stating: it blinks on the machine's clock, and the machine's clock had stopped. A console waiting on a key stops the CPU, so no cycles passed, so the phase never moved - and the one moment somebody is looking at a cursor is the moment they are being asked to type. Waiting is now charged as IDLE CYCLES, which is what they were built for: a machine stopped on a device is not using memory, the same distinction WAIT makes, arrived at from the other direction. And the devices are told as it happens rather than when the instruction finally finishes, because a display controller does not stop blinking because the processor is waiting on a keyboard, any more than a disk stops turning. A keyboard file can now say NOTHING happened. A zero is a byte no keyboard sends, so it is free to mean "a moment went by with nobody typing" - which is the commonest thing behind a window and the only thing a file otherwise could not express. That unlocked the whole waiting path: three checks that the cursor is lit, then dark half a second later, then lit again, which is what blinking is. And Programs/Examples/colours.asm, because the palette had nowhere a newcomer could read it. It prints the sixteen pairs, prints each one again turned inside out, and then CHANGES ONE by writing three bytes into the palette - so the difference between using the colours a machine wakes up with and choosing your own is visible in one program. Its header explains what a cell is, what the attribute nibble does, why palette entries are four bytes rather than three, and why video memory has to be reached through the controller. The manual now says where the palette lives and points at it. SplitLint found a redundant RSTA in the example, which was worth acting on rather than suppressing: the zero was already in A from the mode write two lines up, and saying so in a comment teaches that SETD does not touch A, which is a thing worth knowing. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
d6feddd1b6 |
Give the console colour and a cursor
COLOUR COSTS A NIBBLE AND NO HARDWARE. A glyph is drawn in palette indices 0 and 1, paper and ink, and a cell's attribute nibble adds sixteen to both - so sixteen banks is already sixteen ink and paper pairs, and all that was missing was a register saying which one the console draws in. That is port 0x06, read as well as written like the rest. The palette a machine wakes up with is arranged so that HIGHLIGHTING IS ONE BIT: banks 0 to 7 are colours on black, banks 8 to 15 are the same colours as paper with black ink. So attribute XOR 8 turns any pair inside out. That is a convention rather than a rule of the machine - the device only ever adds the nibble and looks the answer up - but it is the convention that makes a highlighted line and a cursor free. Bank 0 is still grey on black, so nothing that was written before this has changed colour. THE CURSOR IS THE SAME BIT AGAIN. It is drawn by turning its cell inside out rather than by putting a block over it, so the character underneath stays readable, which matters to somebody editing a line. The device draws it rather than the window, because on a machine with a screen a cursor is a hardware feature - one drawn by the presenter would not be in a picture the machine saved. It blinks on the machine's own clock, half a second each way, so the phase is a pure function of the cycle count and a screen saved at a given cycle is the same screen every time. A blink on the host's clock would have made every saved picture a matter of luck. Off unless asked for, with bit 2 of the control port. That is right for a machine - a program painting its own screen does not want something blinking in the middle of it - and CosmOS asks for one at boot. It also asks again when it takes the console back from a program that has stopped, because a program handing key mode back the way it was told to writes zero, which turns the cursor off. The shell owns the prompt, so the shell is what makes sure there is something blinking at it. Nine more checks in Tests/video.sh, to 41: that the attribute colours the ink and not the paper, that XOR 8 turns both, that it reads back, that a cursor appears where the registers put it and only when asked for, and that it goes dark again half a million cycles later. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
978aec4809 |
Let the console edit a line, and let a file be a keyboard
BACKSPACE REACHED THE SHELL. A terminal in line mode does not hand a program every keystroke: it collects a line, rubs out a backspace, and delivers the finished thing at Return. CosmOS has always relied on that, and behind a window there is no terminal to do it, so the raw 0x08 went into the command buffer. Correcting a typo produced a line that looked perfectly right on the screen and matched no command at all - "I do not know: help". So the console does it, because behind a window the console IS the terminal. In key mode it does not, and must not: a program in key mode asked for every keystroke as it happens. CosmOS now asks for eighty columns at boot. Its own help text is seventy-four characters wide, and dir, the monitor and the assembler's messages all assume room. The machine still wakes up in the smaller mode, which is right for a machine - it is the system that knows what shape of screen its own output needs, and a game that wants forty columns says so. AND A FILE CAN BE A KEYBOARD, which is the part that matters beyond today. The console behind a window is not the console behind a terminal, and until now the difference was unreachable: it broke twice in two days and a person typing found it both times. --keyboard installs the same hook a window does, so the same path runs, and the manifest has a column for it. cosmosTyped types "halp", backs over it, arrives at "help", and requires the help to come out. Verified by removing the rub-out, which loses the whole help text. It does not test the window. Voyager's key queue and everything about presenting frames are still out of reach. It tests the console, which is where the logic is. Along the way: VOY_OBJS was missing from the dependency include, so voyager.o never rebuilt when a header changed. EmulatorOptions grew a field, Voyager kept an object that disagreed about the size of the struct, and smashed its stack on every run. A clean build hides it and 'make sanitize' cleans first, so that would never have found it either. Tests/voyager.sh did, by failing all 115 tests that start the machine - which is the differential test earning its keep on a bug that has nothing to do with what it was built to check. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
761c11a66b |
Add run-voyager, and make running depend on the disk
The jitter was a stale disk. An image built before the escape sequences came out still had the old Snake on it, which sends ESC [ H every frame: the console swallows the escape, because it is below the font's first character, and then draws "[H" as two ordinary letters. So every frame began two characters to the right and one line further down than the last, and the board walked down the screen. Not timing at all. WHAT IS ON A DISK IS WHATEVER WAS BUILT WHEN THE DISK WAS MADE, and a machine whose console has changed will start that image quite happily. That is the compatibility break we chose when the parser came out, and it is fine - but it should not be a puzzle, so both run targets depend on the disk rather than merely using it, and both READMEs say why. run-voyager boots the same disk on the machine with a screen. It existed only as EMU=../Voyager in front of run-cosmos, which is not a thing anybody should have to know. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
310804e267 |
Give Snake back the speed its comment promised, and present in step with the display
Two things, one certain and one likely. THE CERTAIN ONE IS NOT THE WINDOW'S FAULT. Snake's pause loop said "at the emulated rate this is about an eighth of a second", and it was, when a cycle was one instruction. A cycle became one memory access, every loop in the machine got dearer, and this one silently doubled: the game has been running at half the speed it documents ever since, in a terminal as much as in a window. Measured rather than guessed - the inner loop is a DECA and a BNA, one byte and three, so four cycles a turn, and a whole run went from 3,848,610 cycles to 1,920,504 when the outer count came down from 256 to 122. Almost exactly half, which is what the arithmetic said it would be. That is the cost model change reaching a program nobody thought to re-measure. Worth looking for others: any loop tuned by eye before that change is running at half its intended speed. THE LIKELY ONE is the frame limiter. Without the vsync hint, Raylib sleeps towards sixty frames a second on its own clock, which beats against a display refreshing on its own - frames shown twice or skipped, and the machine handed an uneven number of cycles each time, since it takes its budget from the wall clock. The hint puts presentation in step with the screen. SetTargetFPS stays for a driver that ignores it. Snake is one byte bigger, because RSTB became INIB. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
43a05b3df1 |
Replace the escape parser with cursor registers
The console had grown an ANSI parser, and that was the wrong shape. ANSI exists because a screen used to be on the other end of a serial line and a byte stream was the only channel there was. This screen is memory the program can already address, so reaching it by sending characters for a state machine to take apart is a middleman for something the machine does better - and it meant accepting an open protocol somebody else defines, in hardware, with no natural end to it. Everything else on this machine is registers. So the console gets three: cursor row at 0x03, cursor column at 0x04, and a command port at 0x05 where 1 clears the screen. Both cursor registers are READ as well as written, which is the thing an escape cannot do without sending a query and parsing a reply - a routine that wants to put the cursor back where it found it can now ask. Clearing is one command against a thousand cells walked one at a time. Snake and Life are smaller for it: 2,168 bytes to 2,163 and 1,410 to 1,396. A HOST TERMINAL STILL SPEAKS ANSI, and bridging to the host is the emulator's job, the same job it does reading standard input. So the escapes are now GENERATED, outbound, for the set this device chooses, rather than parsed inbound as though the machine were a terminal. The set cannot grow behind our backs because we are the ones saying it. The cursor is announced lazily, at the next character rather than at the register write, so setting a row and a column costs one sequence rather than two. The console's block widens from three ports to six, which registryTest noticed: it had been asking about port 0x05 precisely BECAUSE nothing was there, and the console had just moved in. Re-blessing it would have left it checking nothing, so it asks about 0x80 instead - clear of the console, the disk, the screen, the controller, and the sound device coming to 0x40. Six checks in Tests/video.sh swapped from the sequences to the registers, including that the cursor reads back and that one sent past the edge is clamped rather than refusing. Those checks also stopped counting bytes from the ends of a file, which had quietly started measuring an escape the moment the console began announcing the cursor. SplitLint caught the one thing worth catching in the port: the clear command leaves A at 1 and key mode is also 1, so the second load looks redundant. Acting on it would tie a console command to a console mode by coincidence, and break silently if either ever moved, so it is suppressed with that reason rather than removed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
bdb2d0d8e6 |
Keep a key until it is asked for
Input worked at the shell and not in Snake, and that split is the whole diagnosis: the shell blocks on a read, Snake polls the READY bit. Only the polling path was broken. RAYLIB CLEARS ITS CHARACTER QUEUE ON EVERY POLL, and a poll happens inside EndDrawing, so a key survives exactly one frame unless something takes it in that frame. The window presents sixty times a second and Snake looks about ten, so five keys in six were thrown away by the next present before the game ever glanced at them. A blocking read presented and then looked immediately, which is why the shell never noticed. The window now keeps its own queue, drained from Raylib at every present and emptied only when the console actually takes a byte. That is what this machine already promises about its console, and Snake's own comment is the specification: "the console keeps the next key until it is asked for, so a key pressed while the snake was moving is still there next frame". The hook was not honouring it. Asking the queue first also makes the two questions the same question. A poll takes whatever is waiting and returns at once, and a blocking read takes whatever is waiting, then presents a frame and looks again - so neither path can see a key the other would have missed. The queue drops its oldest when it fills, so somebody leaning on the keyboard while a program ignores it cannot push out what they typed most recently. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
556a14b288 |
Teach the console the sequences the corpus already speaks, and let the status port see the window
Three things Snake found the moment somebody ran it in a window, and all three are the same kind of mistake: the console grew a screen and kept asking the terminal. IT COULD NOT CLEAR THE SCREEN. Every program here that moves a cursor does it with ANSI escapes, because until there was a screen the thing on the other end was somebody's terminal. The controller drew "[2J" as three letters and left the board underneath. It now parses them, which is what a video terminal did - a VT100 is exactly this. The whole corpus uses two, ESC[2J and ESC[H, and the general shape is recognised so anything else is swallowed rather than drawn: a sequence nobody implemented should leave no marks. Cursor positioning is in too, since it is the same parse and one line more. IT DID NOT SEE KEYS FROM THE WINDOW, but did when the terminal behind it was focused, which is the whole diagnosis in one sentence. Snake polls the READY bit and never blocks, and consoleFetch - what the status port asks - was polling standard input regardless of whether a front end had installed a hook. So a window's keys were invisible to every program that looks before it reads, and a keystroke aimed at the terminal would be picked up instead. The hook now takes a question. Zero is the status port looking, and must not present or sleep: a program polling in a loop would otherwise be charged a frame for every glance. One is the data port blocking, where presenting is exactly right, because a machine waiting for a key is still a machine somebody is looking at. One value for both would have made either polling ruinous or waiting dead. AND IT RAN SLOWLY, which was the same bug wearing a hat: a game that never receives a steering key is a game that only ever goes one way. Six more checks in Tests/video.sh, to 32: that ESC[2J clears, that ESC[H goes to the corner without disturbing what is drawn, that ESC[3;5H counts rows and columns from one, and that an unknown sequence is swallowed and leaves nothing behind. The hook itself is still the one thing here the suite cannot reach - it exists only when there is a window, and this host has no display. It was found by a person playing Snake, which is where the Test Manual says these go on being found. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
6f8ad42277 |
Fill the window, let it be resized, and make black black
Three things a person looking at a real screen found in five minutes, none of which the headless tests could have seen. THE PICTURE FILLED A QUARTER OF THE WINDOW. The window opened at the largest screen the device can make, doubled, and then drew a 320 by 200 mode at that same doubling - so three quarters of it was bezel. It now takes the largest whole-number scale that fits: the two modes are exactly a factor of two apart and the window opens at twice the larger, so both fill it exactly, at four and at two. Changing mode changes how sharp the screen is rather than how big it is. Whole numbers on purpose. A 320 by 200 picture stretched by 2.7 has some rows twice as tall as their neighbours, which on eight pixel glyphs is the difference between text and mush. THE WINDOW WOULD NOT RESIZE. It does now, and the picture rescales to whatever it becomes, still in whole pixels and still centred. How big somebody wants a screen is not the machine's business. AND BLACK WAS NOT BLACK. Both the paper and the bezel were tinted towards green, on the theory that a phosphor never was neutral. On a real screen that reads as a fault rather than as character: a background that is nearly black looks like a background that failed to be black. Paper is black now and ink is a neutral grey, because a default should be the unsurprising thing - anything with a point of view about colour is 254 palette entries away and belongs to a program. The bezel is a clearly lighter grey, so what is left over when the window's shape does not match the picture's looks like a bezel rather than like more screen. The two checks that name the waking colours name the new ones. That they had to change is the check working: they say what they depend on rather than assuming it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
773b0f8add |
Put CosmOS on the screen without changing a line of it
The console is now a display controller as well as a port: it owns a font, keeps a cursor, handles newline, carriage return, backspace and wrapping, and scrolls. That is an ordinary kind of chip - it is what a video terminal's character generator did - and it is the reason this rung needed no changes to CosmOS at all. CosmOS already writes bytes to port 0x00. It writes to BOTH the screen and standard output, which is deliberate. A machine with a screen and a serial line is an ordinary machine, the emulator's standard output is that serial line, and one console drives both. It is also what keeps all 165 recorded results passing under Voyager, and what makes --screen work on the plain SplitBit: there is one console and it drives everything it has. Scrolling moves the video device's origin and no memory. The row arriving at the bottom is cleared because the map is a ring and it holds what was there 128 rows ago; the rows going off the top are not, and that is a hundred rows of scrollback nothing had to keep. The test reads the register back rather than looking at the screen, because a console blitting rows instead would look identical and cost twelve percent of a frame for every line printed. The font is vendored from Hatchet-GPU with a note saying where it came from, since that repository is not part of this one. 135 glyphs in ASCII order, which is the thing that makes it worth keeping - PETSCII's whole inconvenience was that its order was not ASCII's, so a machine using it needed a translation table in front of every string. Here the machine subtracts 32. It is stored one bit a pixel and expanded into tile memory at reset: 1,088 bytes against 16 kilobytes. Voyager gets a keyboard. A window has no standard input, and a machine blocking on it inside a frame would stop drawing and stop answering, so a front end with a window installs a hook that the console calls while it has nothing: it keeps the window alive and hands back a key. The hook has to tell "nobody has typed yet", which happens sixty times a second, apart from "the window has gone", which is the end of input - one value for both would have made the first keystroke look like a closed machine. In line mode the console echoes what it is given, because there is no terminal behind a window to do it and that was always the terminal's job. Tests/video.sh grew from 14 checks to 26, half of them about the console rather than the device: those programs ask the video device for nothing and write bytes to port 0x00 like every SplitBit program always has. Verified by breaking two things - removing the scroll failed exactly the two checks about scrolling, and removing the cursor advance failed exactly the three that depend on it. Two video checks had quietly depended on palette entry 0 being black, which stopped being true the moment a machine woke up able to show text. They now set what they are about to look at, and a new check pins the waking state itself. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
83623a3df3 |
Give the Voyager a screen
A tile engine on ports 0x30 to 0x3F, bringing one bank of video memory registered the way the disk's buffer is. The CPU writes cell indices and the device turns them into pixels, which is the whole reason a screen is affordable at a megahertz: a frame is 16,667 cycles, a full 320 by 200 picture is 64,000 bytes, and a 40 by 25 map is 2,000. A program that changes two cells writes four bytes. The cost of a screen becomes the number of cells that changed rather than the number of pixels on it. Which makes colour depth free, so the tiles are eight bits: an 8 by 8 cell is 64 pixels and each picks independently out of 256 colours, with no per-cell limit of the kind that made a Spectrum two and C64 multicolour four. The low nibble of a cell's attribute is ADDED to every index in its tile, sixteen at a time, so a tile drawn in 0 to 15 appears in any of sixteen schemes without a second copy in tile memory - and a tile wanting all 256 leaves the nibble at zero and gets them. Neither use costs the other anything. Two decisions are arithmetic rather than taste, and both come from the machine having no multiply. A map row is a page whether the mode fills it or not, so a cell address is the row number as the high byte and the doubled column as the low byte with no arithmetic at all; otherwise every cursor move on a 40 column screen would cost a row-times-40 in software. And a palette entry is four bytes rather than three, so entry n is at n times four, a shift. THE MAP IS A RING and the Scroll register says which of its 128 rows is on top. Scrolling moves a register and no memory: blitting a 40 by 25 screen up one line is 1,920 bytes inside one bank, which is twelve percent of a frame even with the controller widened, and a program printing one page would spend six frames shuffling memory. It is now one port write - and the rows that scrolled off are still there, which is where a terminal gets scrollback it never had. The device is part of the machine rather than part of the window. It renders into a buffer that is a pure function of video memory, so the same program draws the same picture with nobody watching; Voyager puts that buffer on the glass and decides nothing. Both binaries take --screen, which saves a PPM when the machine stops, and that is what makes a screen checkable on a host with no display at all. Tests/video.sh checks fourteen named behaviours rather than comparing a recorded image, because a recorded image would say "something changed" and leave which of the palette, the tile, the attribute, the map or the scroll register broke to be found by hand. Verified by breaking three things in turn: the additive nibble failed exactly one check, the scroll origin exactly two, and moving every cell one pixel sideways exactly the four about placement. Tests/docs.sh could not count past nine, which is how a suite of ten scripts reported itself as wrong for the wrong reason. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
e3ef25e3b3 |
Split the machine from its front end, and add Voyager
The Segan Voyager is the same SplitBit with a screen and a speaker instead of a terminal, and this is the rung that makes there be two of them at all. Everything that is actually the machine - the CPU, the controller, the devices, the run loop, the reporting - moves to machine.c, and each front end brings one file of its own. emulator.c is now sixty lines of argument handling and a three line loop. The machine runs in SLICES rather than to completion, because that is the cut a window needs: run a slice, present a frame, run another. A terminal runs slices until the machine stops. Both loops are three lines, which is why the cut is there rather than anywhere else. At this stage Voyager's window is empty. There is no video device yet and inventing a temporary way to draw would mean building something to throw away. PLAIN MAKE STILL WORKS WITH NO GRAPHICS LIBRARY. Raylib is probed by compiling and linking against it rather than by looking for a file, because a header with no library behind it passes a file check and then fails at link time. Where it is missing, make says so once and builds everything else - the machine, the assembler, the disk tool, the linter and the whole suite. A project about a small understandable CPU should not need OpenGL to run its tests. That nearly broke here: make strict globs Source/Emulator/*.c, so it would have tried to compile voyager.c and failed on precisely the machines the split exists to support, and this machine has Raylib so nothing would have caught it. Tests/voyager.sh runs the WHOLE MANIFEST through Voyager and holds it to the recorded results SplitBit is held to. Not that the two look alike: that one satisfies every recording the other does, byte for byte, exit status included. It reuses run.sh, which now takes the machine from SPLITBIT_EMULATOR, rather than keeping a second copy of the runner that would drift. Voyager not being built is not a failure - it says so and passes. Verified both ways. Made Voyager print one extra line, and 114 of 165 failed: exactly the tests that run the emulator, with the 51 assemble-only and xfail cases correctly untouched. Removed the binary, and the script skipped. Built with HAVE_RAYLIB=no, and everything else still built and checked clean. --headless is taken out of the arguments in voyager.c rather than in the shared parser, which should not learn about a window only one binary has. It exists so the suite can run this binary at all: a front end that could only be exercised by a person looking at it would be a front end nothing checks. loadFile takes a const char * now, which it always should have. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
4c3eac8d9c |
Widen the memory controller's path to sixteen bits
The controller now reaches bank memory two bytes at a time, so a transfer whose source, destination and length are all even moves two bytes a cycle between banks and one within a bank - twice what each was. A 256 byte block between banks falls from 257 cycles to 129. Alignment is required all three ways because a word is read at an even address and written at an even address; an odd anything would mean shifting bytes across word boundaries to line them up, which is a different design. A misaligned transfer falls back to the byte a cycle it cost before, so nothing already written got slower. THE CPU DOES NOT CHANGE. It still sees eight bits, a Data Pointer still addresses a byte, and no instruction means anything different. This is a peripheral getting faster, which is why it is worth doing now rather than after more is built on top of it. The rule is deliberately visible rather than smoothed over: aligning a buffer costs nothing and halves what moving it costs, and a cost a program cannot see is a cost it cannot avoid. Tests/cycles.sh is new, and is the test the Test Manual has always said this kind of change would need - run.sh strips the cycle count from every recorded result, so nothing else in the suite can see any of this. It pins the RATE rather than a total: each case runs twice from programs whose instructions are identical but for the byte written to the Command port, once asking for the transfer and once for GuardOff, which costs nothing beyond the port write. The difference is the transfer and nothing else. Verified by disabling the widening, which failed exactly the three aligned cases and left the five misaligned ones passing. The Programming Manual gains a section saying what a transfer costs, which it never said at all - it only promised a transfer does not wait, which is a different claim and could be read as promising it is free. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
c3c2451afe |
Say what the strict build and the sanitizers actually establish
Three claims in the Test Manual were true enough to pass and loose enough to mislead. The headline said the two assemblers produce identical bytes and the two filesystems produce identical disks, with no qualifier. That reads as universal and is not: it is evidence about the corpus assembled and the operations performed. The detailed sections already said so; the headline now says so too, because a document arguing about what evidence is worth cannot overstate its own. "Compiles under strict ISO C" omitted -D_XOPEN_SOURCE=700. The check is strict C11 with the POSIX interfaces the code uses explicitly selected - realpath, strdup, dirname and getopt - not freestanding ISO C, and the flag is part of the check rather than a hole in it. And the sanitizer section leaned on AddressSanitizer's junk fill, which is a toolchain default this build does not configure and which buys almost nothing here anyway: there are six heap allocations in the whole repository, all in the assembler, the largest a deliberate calloc, and the machine's own memories are static arrays the sanitizers neither fill nor bound-check. That last part is the overrun blind spot seen from the other side, so it now points at it. The same claim is corrected in the makefile, where it originated. Found by ChatGPT reviewing the manual. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
8fbbeb6ec9 |
Make xfail compare the diagnostic, not just the failure
The Test Manual said an xfail test records the assembler's refusal message and so catches both an error that stops being detected and a message that changes without anybody meaning it to. It did not. run.sh checked only that the assembler exited non zero, printed the first line for a person to read, and compared nothing; --bless recorded nothing for these sixteen tests at all. So an xfail passed four different ways that look identical from outside: the intended error fired, an unrelated error fired, the message changed, or the assembler fell over on its way to the point. That is the documentation describing behaviour the code does not have, which is the exact failure Tests/docs.sh exists to prevent, in the manual that argues for knowing what your evidence is worth. The diagnostic is now stripped of colour, given the same [exit N] line every other recorded result carries, and compared through check() like anything else. Sixteen results recorded; every existing one is byte for byte unchanged. Verified the way the manual asks: one diagnostic was broken on purpose, its test failed with the changed line in the diff, and its neighbour passed. Found by ChatGPT reviewing the manual. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
999451e935 |
Ignore External, which is other people's repositories
soundThing and Hatchet-GPU are kept in the working tree to be read, not built: one is where the synthesizer comes from, the other is where the 8x8 font and the scroll register idea come from. Neither belongs to this repository. They carry their own .git directories, their own build outputs and three compiled binaries between them, and a plain 'git add -A' would have taken all of it. What this repository takes from them will be vendored deliberately, with a note in the file saying where it came from and what changed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
AnachronautandClaude Opus 5
|
d6bc416698 |
Write the Test Manual, and make the suite check it
The test system had grown to seven scripts making five genuinely different kinds of claim, and nothing said which was which. A recorded transcript and a byte-for-byte comparison against a second implementation both print [ok ] and are worth wildly different amounts, so the fourth manual exists to say so: what each script can and cannot answer, why every determinism rule is there, how to add a test, and - the part written nowhere else - where the suite is blind. That last section is the reason for the document. Three buffer overruns into adjacent variables were all found by a person using the machine and none by the suite, the sanitizers cannot see them because emulated Data Memory is one legitimate host array, and there is no second opinion about the CPU at all. A document listing only strengths teaches the wrong lesson. The bullets describing each script move out of the README, so docs.sh now reads the manual for them, and five more numbers in it are settled from the source rather than trusted: the shape of the manifest, the xfail count, how many fixture disks makedisks.sh builds, how large the lint baseline is, and the tool count in either document. Each of the new checks was broken on purpose and watched to report before being kept, which is the discipline the manual itself argues for. Also drops the stale "70 instructions" from instructiontable.py's docstring. There are 72, and a number that carries no meaning is better removed than corrected. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |
||
|
Anachronaut
|
79727044b7 |
Reboot, and the machine device that makes it possible
Until now the only way to restart was to stop the emulator and run it again, which meant the one thing the machine could not do was the thing Once was written for. The loop now closes without leaving it: > Once /System/Boot/bare.bin next start: /System/Boot/bare.bin, once > Reboot starting again stage two just this once: /System/Boot/bare.bin bare metal: no system, just this Writing 1 to port 0x13 asks the machine to start over. A PORT RATHER THAN A SERVICE, because a reset has to work when the system does not: something only askable through SWI would be unavailable in exactly the case that wants it most, and a program that owns the whole machine has no system to ask. It is device class 0x04, in the range kept for the machine rather than among the peripherals, because it is not one - it is not attached to anything and cannot be unplugged. WHAT A RESET REPEATS IS HOW THE MACHINE STARTED. Named an image, the emulator places it again; named none, the ROM is shadowed again and reads the disk. Anything else would mean a reset changed what the machine IS, which is the one thing a reset must not do. Both are tested. Taken between instructions, because a device cannot restart the machine from inside the instruction that asked: the CPU is part way through a step and its state is not yet anything a reset could leave behind consistently. The disk stays attached and keeps everything written to it - that is what warm means. The vector table is cleared, which is the one deliberate departure from leaving memory alone: a vector points into whatever installed it, and after a reset that program is not running, so a handler left behind would aim an interrupt at an address belonging to something gone. It is the argument CosmOS already makes at exit, applied to the machine. Reboot is 45 bytes, most of them the word it prints. |
||
|
Anachronaut
|
7b28f48f52 |
Once: start something else on the next start, and only that one
A program that owns the whole machine had nowhere to run. It cannot be started from the shell, because starting it means there is no shell, and pointing boot.cfg at it means a machine that keeps starting it - which is a poor place to find a mistake in something written five minutes ago. Once writes /System/Boot/once.cfg, in the same format as boot.cfg and read with the same routines, because a second format for one setting would be a second format. The loader reads it before boot.cfg and DELETES IT BEFORE IT JUMPS, which is the only moment there is: after the jump the loader does not exist. Consumed by being read rather than by working, so a one shot that hangs cannot hang twice - the request is gone before the image ran, and the next start reads boot.cfg like any other. THE BOOT STATE IS NOT TOUCHED, and the first version got that wrong. It marked the start the way any other start is marked, and then every successful bare metal boot reported that it had never arrived - because a program with the whole machine has no filesystem to clear a mark with and is doing nothing wrong by not having one. Found by running it: the image printed its line and the next start still said the last one did not. Three disks, each a start further along, so none of the tests depends on another having run. The loop is closed on the machine now: write it in Edit, assemble it with Asm, ask for it with Once, restart, watch it own the machine, and the system comes back without being asked. |
||
|
Anachronaut
|
89c667848b |
Edit read a file into a buffer it never checked the size of
Opening hello.asm showed a thirty one line file as three, one of them cut short. Opening it again hung the machine: the emulator kept running and nothing ever answered. Entry is the buffer a line is read into, and it is followed in memory by TextHead and ArenaFree - the head of the document, and the pointer its line allocator hands out. The loop that splits a file into lines copied characters in WITH NO BOUND AT ALL, so a 94 character line wrote thirteen bytes over both of them. The list head then pointed into the middle of the text and the allocator handed out an address inside the file, which is why the second open walked a list that led back into itself for ever. Typing was always safe. osReadLine is told how much room there is, so a new document behaved perfectly and a source file did not - which is exactly how the user found it, and why it looked like a mystery rather than a bug. The bound is there now, and the buffer is 128 characters: what a line is everywhere else on this machine, the same number configuration files use, rather than a second answer to a question already answered. hello.asm fits. A file with a longer line is REFUSED rather than shortened. This is an editor - a line cut on the way in would be written back cut, and the file damaged by having been looked at. It says so and exits with a status of one, which it can do since this afternoon; the file is byte identical afterwards, and the test checks that. Opened twice in the test, because once is not enough to see it: the first open does the damage and the second is what never returns. This is the third time this shape has turned up: a buffer written past its end into the variables that happened to follow it. The prompt walked off CwdText into the shell's own command names; the assembler's output ran into its label table. Every one was found by a person using the machine. |
||
|
Anachronaut
|
87d819847e |
A program can say how it went
SWI osExit takes a status in A, and the shell keeps it. Fifty eight exits across twenty three programs now say deliberately whether they worked: 25 did what they were asked, 24 did not, 9 were asked wrongly. Compare is the exception and says so - one there means the files differ, which is a result rather than a failure, the way diff has always had it. IN A RATHER THAN Q, which is not a departure from the rule that a service answers in Q. This one takes an ARGUMENT, the way osPrintNumber takes A and B, and it never returns to answer anything. A is free precisely because a return would have put it back - and Q is the ALU's output, so a small number costs four instructions there against one in A. The shell does not print it. A program that failed has already said so in words and a number beside that is noise, so osLastStatus hands it back and Status is the program that shows it. That indirection is the point: the number exists for the thing that cannot read words. MARKING THE EXITS FOUND A DEFECT ON THE FIRST RUN. Type and More printed why they had failed and then fell through into the success exit, reporting that all was well. Nobody had noticed, because while the only reader was a person, the person could see both the complaint and the claim. Two smaller things. Snake sets the console to line mode and then exits with zero, and the linter flagged the second RSTA as redundant - an exit status and a console mode, equal by accident, which is the class that must never be collapsed. And the README still taught answering by writing into the frame, three months of habit that SRET replaced yesterday; that section is gone and the one describing SRET stands in its place. |
||
|
Anachronaut
|
b4206673a6 |
The clean install disk is one the machine can start itself from
make run-cosmos handed the emulator a boot image AND a disk, so it took the direct path every time: memory placed from outside, nothing on the disk consulted about it. The whole boot chain was built and tested and then not used by the one command that runs the system. The disk is formatted with a boot area now, stage two goes into slot zero as raw bytes, and the system is an ordinary file at /System/Boot/cosmos.bin - which is what boot.cfg would choose between if there were one. There is not: stage two falls back to that name when the file is missing, and a clean install with nothing to configure is the right default. run-cosmos names no image, so the machine starts itself. The old behaviour is run-cosmos-direct, which is worth keeping and worth naming honestly: it is what a debugger does, and it is what to use when the thing being debugged is the boot chain, since it skips the boot chain. /Source gains stage1.asm and stage2.asm, so the machine can rebuild what starts it. Everything stage two includes is already in /Lib, so Asm stage2.asm on the machine produces the bytes a boot slot takes. Stage one is the exception and always will be: it is the ROM, and the one part of this that a disk cannot replace. Second slot left empty, which is what makes replacing the first survivable. |
||
|
Anachronaut
|
f1cc2e56b2 |
The last handler that knew a frame offset
handleReadLine used DP1 for the frame and the conversion only looked for DP2, so it kept the whole dance - and the dance had become a no-op that looked like work: MVQA copied Q into A, A was written over the saved Q, and RETI restored it, which is where it started. readLine leaves the length in Q and SRET keeps Q, so the answer simply stands. No handler in CosmOS knows what an interrupt frame looks like now. The 0d02 and 0d05 offsets still in the file are structures - an SBEX header, an entry in the instruction table - and not frames. |
||
|
Anachronaut
|
61a80ae13d |
Put the manual's sections back in opcode order
The user's edit. Moving branches to 0x60 and subroutines to 0x70 left their sections sitting where they used to be numerically, between the ALU and the registers, so the manual read in an order the opcode map no longer did. The list has always been arranged by opcode sequence rather than by importance or by how often a thing is used - arbitrary, and now canon. |
||
|
Anachronaut
|
c8c9f0b363 |
SRET: a handler answers the way a subroutine does
CALL saves A, B and Data Pointers 0 to 2 and nothing else, which is exactly why Q and DP3 are how a subroutine hands something back. An interrupt saves all of it, so a service with an answer had to reach into its own frame and un-save two fields by hand: MVSD.2 DPUP.2 0d02 ; the saved Q, by an offset it had to know STA.2 RETI Thirty places in CosmOS did that. Every one knew the frame's layout by heart, and all thirty would have gone quietly wrong the day the frame gained a field - the same duplicated fact this project keeps being bitten by, except duplicated into thirty places AND into the CPU. SRET is 0x76, in the seat the block split left for it. It is RETI's frame with RET's rule applied: A, B and DP0 to DP2 come back, the saved Q and DP3 are dropped, and the Interrupt Flag is restored from the frame - only that bit, so carry survives a service the way it survives a call, and there is one rule rather than two. RETI stays exactly as it was: a hardware handler has nothing to say and must leave no trace. CosmOS is 10,969 bytes against 11,122, and no handler knows a frame offset. TWO MISTAKES WORTH RECORDING, both mine, both caught by tests. The first conversion matched STA.2 with a regular expression that did not allow a trailing comment, so it ran past the end of one handler and into the next. The second understood the pattern and still got it wrong: the old frame write carried the answer from A into the saved Q slot, so simply deleting the write left Q holding whatever it happened to hold. Services that answer by calling something were fine - Q already had it - and services that set A directly silently reported success for every failure. cosmosCwd is what noticed, by saying "cannot go there" about a directory that was there. Sixteen handlers move the answer into Q now. Seven MVQA went with it. They copied Q into A so the frame write could carry it; SRET puts A back, so they moved a value nobody would ever read. |
||
|
Anachronaut
|
cd5f548736 |
Move the opcode map: nothing in 0x0X, and room for a return variant
Three blocks move and nothing else changes. Branches take 0x60, subroutines take 0x70, and the ALU moves up into the 0x10 block the two of them used to share. Order within each block is preserved exactly - this relocates them, it does not rethink them. WHAT IT BUYS IS AN EMPTY 0x00 TO 0x0F. Program Memory that was never written, or a load that stopped part way and left zeroes in its tail, used to read as a long run of ADDs: the machine carried on through them, arrived somewhere unpredictable, and whatever broke there was a long way from the byte that caused it. Now it faults where it is met: Fault: 0x00 at Program Address 0x0004 is not an instruction. That is the address of the byte after the last real instruction, which is the difference between a diagnosis and a search. Reserving the whole nibble rather than just 0x00 means a run into blank memory faults wherever it starts rather than only when it lands on the right byte. runOffTest records it, and the block is left empty for whatever turns out to want it. The other half is room: branches and subroutines had filled 0x10 to 0x1F between them, so a service return that keeps Q and DP3 had nowhere to sit next to its family. It has 0x76 waiting now. Five places wrote an opcode down that the scripted remap did not reach, and four of them were found by tests rather than by looking: - secondPass.c lists which opcodes take an address, and firstPass.c knows SWI by number. Missing those made XOR read as a branch. - Asm.asm knows SWI by number too, being the other assembler. Missing it made the native and host assemblers disagree byte for byte, which is exactly the check that exists to catch a thing known in two places. - loaderTest.asm carries a hand written payload, and its RETI was 0x19. To the assembler those are numbers and to the program they are data, so nothing but running it could notice. It says so in a comment now. - The Assembler Manual prints the bytes hello.asm assembles to, and two of them were branches. The monitor's recorded disassembly moved by exactly the bytes it should: 18 became 72 wherever SWI appears, with SETD and INIB untouched and every disassembled line still reading the same. |
||
|
Anachronaut
|
ce2a2cd7e6 |
Settle is a program, and a machine with no fallback still starts
The boot state opened a loop that could not be closed from inside: the machine said "settle it to try again" and gave you no way to do so. Settle closes it, in 349 bytes. A PROGRAM RATHER THAN A SHELL WORD. The shell is for the things that cannot be done without it, and this is not one - it reaches the system through SWI like anything else, which means it can be replaced, left off a disk, or called by whatever comes to call programs in turn. That last one is the point: a shell word is not callable by anything. Two services for it. osBootState answers in Q, and a machine with no disk answers settled, because there is nothing there to be unsettled about. osBootSettle puts it back. SETTLING IS THE ONLY WRITE A PROGRAM GETS - marking a start as trying or fallen back is the loader's business, and a service that let a program claim either would let it lie about something the loader has no way to check. And a hole the tests walked into, which was mine rather than theirs. With no fallback configured, a failed start left the machine unable to start at all: the mark said do not use the system, and there was nothing else to use. That turns "the last start failed" into "no start is permitted", which is worse than the problem the mark was added to solve. With nothing to fall back to it now tries the configuration again and says so - a failure that was passing recovers, and one that is not leaves the machine exactly where it would have been without any of this, which is the most that can be promised when there is only one thing to start. docs.sh caught both new services having no row in the services table before anything else did. |
||
|
Anachronaut
|
dc74149321 |
B4: the disk remembers whether the last start arrived
The loader marks the superblock before it hands over and the system clears the mark when it reaches its prompt, so a system that crashes on the way there leaves it set. The loader finding it still set next time is how a machine that will not start says so to the only thing in a position to do anything about it. Without that, pointing boot.cfg at something that dies before the shell is a machine that can never be told anything again - the shell is the only way to change the file, and the file is what stops the shell from starting. Three states rather than two, and the third is the one worth having: 0 settled the last start arrived; use the configuration 1 trying handed over, and nothing came back to say it got there 2 fell back a try failed and the fallback was used, until settled With only 0 and 1 the machine alternates for ever: fall back, reach a prompt, clear the mark, retry the broken system, crash, fall back. State 2 stops that. A system known not to start is not tried again until somebody says the situation has changed. REACHING THE PROMPT IS A DELIBERATE THRESHOLD. It is not a claim that the system works - a shell can be reached by something broken in every other way. It is the point where a person can type, which is exactly what the fallback exists to give back: anything wrong past there is fixable from the prompt and nothing wrong before it is fixable at all. The routines live in sbfs.asm because both the loader and the system read and write this byte, and two pieces of code with their own idea of where a byte lives is what this format has two implementations and a byte for byte comparison to avoid. And the trap this system documents in its own manual caught me anyway: the first version handed the state back in A, which CALL restores, so every read got whatever the caller happened to be holding. It comes back in memory now, and the comment says why. Three disks differing only in the state on them, so the tests read as three consecutive starts of one machine while none depends on another running. |
||
|
Anachronaut
|
546f336823 |
Configuration files, and boot.cfg as the first of them
One setting to a line: a key, a space, the rest of the line is the value. A semicolon starts a comment. The format was noticed rather than designed - textSplit already cuts the first word off a line and leaves the rest, and textSame already insists two strings end together, so reading a setting is those two routines and a loop. It is also what the shell reads, which makes a configuration line a command line the machine reads instead of a person typing one. The format was chosen by asking what the BOOT LOADER could manage, because it is the worst case in every direction: a few kilobytes, no operating system to report to, and if it fails the machine does not start. Two formats would be worse than one and the loader cannot have the richer one. CONFIGURATION IS ADVICE. A missing file, a missing key, an unusable value, a line too long to read: all of them mean use the default and none is a failure. BUT QUIET IS NOT SILENT - a setting somebody meant, which did not take effect, says so. That was the user's addition and it is the better rule: the default alone leaves the only symptom being that the machine did not do what somebody asked. So two routines. cfgGet reads and says nothing, because reading three settings should not report one bad line three times. cfgCheck reads the file once and reports, and is handed the caller's list of keys - whether a key means anything is the only part of this a shared reader cannot judge. /System/Boot/ holds the boot files, and stage two reads boot.cfg for what to start, with a fallback to try if it does not work and a name compiled in for when the file says nothing. THE TEST FOUND A REAL BUG, and it is the interaction I would not have thought to look for. First-match-wins met an empty value: a file with system system /System/Boot/bare.bin matched the first line, handed back nothing, and the machine tried to start a file with no name while a good setting sat underneath. An unusable value is an absent one - which is what "configuration is advice" says, and this is where it earns its keep. cfgBare starts an image with no operating system in it at all, which is what loading an ordinary boot image buys: a program wanting the whole machine is a file like any other, chosen the same way the system is. Three disks differing ONLY in boot.cfg, so each is a test of the file rather than of the machinery under it. |
||
|
Anachronaut
|
54ff7196c9 |
Stage 0: the emulator carries the ROM, so a disk is enough
./SplitBit --disk system.img stage two CosmOS > No boot image named. The emulator shadows its built in stage one into Program Memory - boot vector included - and the CPU then does exactly what it has always done: reads the boot vector and starts where it points. NOTHING ABOUT THE CPU CHANGED to make a machine that starts itself, which is what picking shadowing over a mapped ROM bought. The ROM is generated from Programs/Boot/stage1.asm by the makefile rather than committed beside it, because a copy of a program kept next to the program is a copy that goes stale. That makes the assembler a real dependency of the emulator, which it always sort of was and now says so. od and awk rather than xxd, which is not everywhere, or python, which the README does not ask anybody to install in order to build this. loadROM is loadFile given bytes instead of a path: both go through one reader over an fmemopen stream, because a ROM is a boot image and there is no reason for the machine to have two ways of understanding one. Naming an image still works and is what every other test here does. That path is not a shortcut to apologise for - placing memory from outside is a real thing real machines allow, and it is a debugger. The help says so now. No image and no disk is the one case with nothing to run, and it says that rather than printing a usage message about a missing file. run.sh gained a "rom" mode which hands the emulator a disk and nothing else. The source column still names stage1.asm, because that is what is IN the ROM: assembling it there says the thing the emulator carries is a thing that still assembles. |
||
|
Anachronaut
|
c312853f8e |
The machine starts itself
stage two CosmOS > saved it read it back, 22 bytes: Stage one hands over to stage two out of a boot slot; stage two mounts the filesystem, finds /System/cosmos.bin, takes the image apart and places its code, its data and its vector table, and jumps to the entry point the vectors named. Nothing placed memory for it. What it loads is an ORDINARY BOOT IMAGE, the same SPBT file the emulator has always been handed. That was the user's call and it is the whole trick: a second stage that loads the machine's normal image format is not a boot-specific mechanism, so bare metal SplitBit stops being a special case. A program wanting no operating system under it is just an image, written under CosmOS like any other, and startable because it is a file. Three things in it worth knowing: - THE ENTRY POINT IS CAUGHT ON ITS WAY PAST. Program Memory cannot be read back, so the boot vector cannot be looked up after being installed; the vector loop notices the one addressed at 0xFC00 and keeps it. - A missing "VEC" is not a fault. An image written before vectors existed simply ends after its data, and then the entry point is zero, which is what every such image has always relied on. - Feature flags that are set mean an image asking for a machine this may not be, and the honest answer to a request that cannot be understood is to refuse rather than to run it anyway. The test records that the system WORKS afterwards rather than that it started. A loaded program running is what says the vector table arrived, because a program reaches the system through SWI and nothing else; the file written and the directory entered say the filesystem and the console came up with it. A second disk has a boot slot and nothing to start, and says so rather than jumping somewhere. |
||
|
Anachronaut
|
82adeeb193 |
A boot payload can arrange its own Data Segment
Stage one places Program Memory and nothing else, because knowing where a payload's data ends and its code begins would mean knowing a format, and knowing formats is what ROM must do as little of as possible. But the real second stage needs a Data Segment: sbfs.asm has variables and a string it compares against. The answer needs nothing new. A loadable image is written into the slot as code followed by data, so the data image is already in Program Memory just past the code - and the payload's first instructions blit it down to where it was assembled for. Proved by slotData.asm, which prints from a string it placed itself. The padding is the part worth recording. The blit needs a length and the assembler will not work out the difference between two labels, so the segment is padded to a round number and that number is what gets copied. The first draft padded to 257 and copied 256, and the byte that did not arrive was padding, so it worked by luck. It is exact now and says why. This is the shape the user asked for and it goes further than the mechanism: the second stage becomes a loader for the machine's ORDINARY image format rather than for anything boot-specific, so bare metal SplitBit stops being a special case. A program that wants no operating system is just an image, developed under CosmOS like any other, and selectable at boot because it is a file. |
||
|
Anachronaut
|
d07b23f90b |
Rung 2: the machine starts itself off a disk
Stage one exists and works. It is 330 bytes of program and everything it knows is a thing that will be true forever: which port the disk is on, that a SplitBit disk begins with its own name, and where two numbers sit in that first block. Not what a file is, not what a directory is, not that SBFS has versions. It reads the live boot slot into Program Memory, jumps to the first byte, and prints one character and halts if there is nothing there. It is an ordinary boot image for now, so the whole chain runs on machinery that already exists and the emulator has not been touched. Nothing about it changes when it moves into ROM except who puts it in memory. SplitDisk gained "boot" to write a slot and "bootslot" to choose one, kept apart on purpose: writing a slot and starting from it are different decisions, and joining them would make every write a commitment. A slot is always written WHOLE, because one still holding the tail of what was there before is one whose contents depend on its history, and stage one reads all of it without knowing where the file stopped. Three recorded tests, and the pair is the point: two disks differing only in which slot the superblock names, with payloads that say different things. One prints "booted" and the other does not, so this is a test of CHOOSING a slot rather than a test that some bytes were read. The third boots a disk with no boot area and gets the one character a ROM has room for. Eight more host checks, including that a slot is padded whole. Two things worth recording. The first draft used #Align to put the scratch buffer at 0x8000 and produced a 33K file - thirty two kilobytes of zeroes in something meant to be a ROM. It is an address, not storage, which is exactly what the assembler's own scratch map exists to say. And SplitLint caught the second in code written an hour after the baseline that catches it. In the blit set-up, RSTA writes a source address of zero and then RSTA writes a bank number of zero - two unrelated quantities that are equal by accident, in the most safety critical file in the repository. It is marked with a reason rather than removed. |
||
|
Anachronaut
|
612bd1b97c |
B1: a boot area on the disk, reserved by arithmetic that was already there
The first rung of booting from disk. A boot area is blocks between the superblock and the directory that the filesystem never allocates and never sees, and NOTHING WAS ADDED TO RESERVE THEM: both implementations work out the first usable block as directoryStart + directoryBlocks, and directoryStart has always been a field rather than a constant. Formatting with the directory moved up reserves everything below it. Neither allocator changed, on either side. Two new superblock fields in bytes that were reserved: bootBlocks at 14, per slot, and bootSlot at 16. A disk made before this has zero in both, which reads as "no boot area" - true, and the same shape as the version two parent field, where the value an older disk already held was the right answer without conversion. TWO SLOTS, ALWAYS. A boot slot is raw blocks with no entry to rename, so the write-a-temporary-and-rename ordering that protects every file cannot protect it, and a machine interrupted while updating its only slot would not boot at all - the one failure on this disk with no way back. Writing the slot that is not live and then moving one byte makes that a machine that boots what it had before. bootBlocks and directoryStart say the same thing from two sides, so a disk where they disagree is refused rather than guessed at, as is one naming a slot that does not exist. Checked where it matters: the HOST formats a disk with a boot area and the MACHINE fills it, then the reserved blocks are compared against zero. The machine's allocator is the one that had no idea any of this was happening, which is what makes that the check worth having. Six host checks besides, including both halves of the superblock disagreeing. |
||
|
Anachronaut
|
0a2965bc63 |
Name the rules, say when there is nothing to say, and hold a baseline
Four things SplitLint wanted, and they build on each other. EVERY WARNING NAMES ITS RULE, in brackets at the end the way a compiler names the flag that produced it. Twelve rules, listed by --help. That makes the other three possible: suppressions can name one rule and leave the line honest about the others, the harness can assert on a rule's identity rather than on the wording of its message, and --machine can print one tab separated line per warning - file, line, rule, message, help - so nothing downstream reads prose. This file's own output was parsed with regular expressions three times in one day before it had a shape to rely on. A CLEAN RUN SAYS SO: No style warnings: 121 files checked against 12 rules. It used to exit in silence, which does not tell you it found nothing - it tells you nothing at all, and from outside the two are identical. A MARKER THAT SILENCES NOTHING IS ITSELF REPORTED, as dead-suppression. An exception that outlived whatever made it necessary is the thing the required reason exists to prevent, and naming the wrong rule now gets you both the warning you meant to silence and a note that your suppression is doing nothing. AND THE CORPUS IS HELD TO A BASELINE. Sixty one warnings are left in it deliberately and nothing stopped a sixty second. Tests/lint-baseline.txt records how many of each rule each file should produce, so a new one fails make test while the sixty one stay quiet; confirmed by adding an INIA 0d0 to Say.asm and watching it name the file, the rule and the count. It counts per file and rule rather than recording line numbers, because line numbers would churn the whole baseline whenever anything was inserted above a warning - the same reason cycle counts are stripped from recorded output here. ./Tests/lint.sh --bless records it again. One thing to know for next time: the rule name was inserted before the line number at all twenty one call sites, and the signature was changed to match rather than the twenty one call sites being fixed. (path, rule, line) reads no worse than (path, line, rule) and one edit has fewer ways to go wrong than twenty one. |
||
|
Anachronaut
|
9c144469b4 |
Take the SplitLint findings that are one operation, leave the rest
Twenty four more sites, and the interesting part is which ones were left alone. A rule emerged while reading them and it held all the way through: apply where the repetition is INSIDE one operation, skip where the author's own structure says it is a new thought, and never where two equal values mean different things. Taken: - Five registers reassigned to a value they already held, where both are the same quantity: two masks in one expression in Snake, two spaces printed by the monitor, both halves of block zero in waitTest, and a RSTA in Pour that the very next instruction overwrote. - Eighteen SETDs that reload a pointer inside one operation - a store back into the variable just read, or an INCD stepping to the second byte of a two byte value. Those read correctly without the reload. - sbfsNext, which branched to the label on the line below it. Left, with reasons that are the useful part of this: - Eight registers where the same number means two different things. CosmOS and the loader set A to 1 for a blit command and then to 1 again for a bank number; Asm compares a type against 3 and then a status against 3. Removing those couples one quantity to another that is equal by accident and would part company silently. - Ten RSTAs that open the RSTA/RSTB/CCF/ADD "return zero" block. The redundancy is what makes that idiom self contained; taking it out makes the return value depend on the line above. - Eleven SETDs that begin an arm of a comparison chain. Each arm loads, compares and branches, and they get reordered - the repetition is the reason a new arm can be dropped in anywhere. - Twenty five SETDs separated from their pointer by a blank line or a comment, which is the author saying a new thought starts here. - Two CCFs before arithmetic, which this codebase writes unconditionally. - Three redundant branches in test programs whose recorded output includes addresses, where three fewer bytes moves what the test demonstrates. Nine recorded outputs moved and every one is a size in a listing or, for Life, five more generations inside the same cycle budget. Behaviour is unchanged everywhere: cosmosSnake and cosmosEdit pass byte for byte while Snake loses eight bytes and Edit twelve. CosmOS is 10,902 bytes of program against 10,937, and the native assembler 12,173 against 12,183. The CosmOS README's size for Edit moved twice in one sitting, and this morning's check caught it both times - which it could not have done before that claim was reworded to name what it was about. |
||
|
Anachronaut
|
e1273337c4 |
Two mechanical fixes SplitLint found: MVQA, and RSTA for zero
Twenty four places moved Q into A or B by pushing it and popping it back. That is four bus cycles and two bytes to do what MVQA does in one of each, and several of them are inside loops - Life, the calculator, int8. Nineteen more loaded zero with INIA 0d0 where RSTA says the same thing in one byte. Both are equivalent at the CPU rather than by assertion: RSTA and INIA both leave Status alone, and PSHQ followed by POPA nets to A = Q with the Stack Pointer where it started. The one difference is that the pair leaves a copy of Q in memory just below the Stack Pointer and MVQA does not, which nothing here reads. Five recorded outputs moved and every one of them says the change worked: - 16x16Life fits five more generations into the same cycle budget, the first 457 lines identical, because the loop got cheaper. - Life.sbx is 1409 bytes rather than 1411, in three tests that list it. - Edit.sbx is 1995 rather than 1996. That last one broke a check I added this morning, and the hole is worth recording: the CosmOS README's claim about Edit's size did not have the word "Edit" on the same line as the number, because the subject was in the sentence before, so the check that measures quoted sizes skipped it silently. The sentence now names what it is talking about, which makes it both checkable and clearer, and the check fails on a wrong number there. Comments on either half of a replaced pair are carried onto the instruction that replaces them, so nothing anybody wrote was lost. |
||
|
Anachronaut
|
c146d98588 |
Stop the linter recommending a change that a faster helper would break
SplitLint knew that CALL restores A, B and Data Pointers 0 to 2, so a pointer set before a call is still set after it. That is true, and it made the tool give advice that was correct today and unsafe to take. Of the 178 redundant SETDs it found across the corpus, 122 were redundant ONLY because of that restore - the shape is everywhere, because it is how a helper is given its arguments: SETD.0 SbfsBlock SETD.2 SbfsFileStart CALL sbfsSetWord SETD.0 SbfsBlock <- flagged Removing that last line is right until sbfsSetWord is reached with RCAL, which restores nothing - and that is not hypothetical, it is what RCAL was added to this machine for, measured at close to halving the assembler's memory traffic. The failure would also be silent from the linter's side: it forgets everything across an RCAL, so it would stop reporting while the removals stayed removed. So a claim now ends at any call, for pointers and for registers, the way a claim about carry already did. 257 warnings become 127, and the redundant SETDs 178 become 54 - which is exactly the number an independent count of "no CALL in between" had arrived at separately. The fixture gained a SETD and an INIA repeated across a CALL, which must stay quiet, and the harness fails with the old behaviour put back. Two mistakes worth recording: the new expectations first pointed at the LABEL above the repeats rather than the repeats, which passes for free because nothing ever warns about a label; and the block landed in the middle of another check's comment, leaving that comment describing the code below it instead of its own. |
||
|
Anachronaut
|
8f4cc5878d |
Repair a table cut in half, and measure the numbers that had drifted
The README's emulator options table was split by forty lines of prose: two rows, then the whole discussion of the cost model, then five more rows with no header above them. Markdown renders that second half as something other than a table, so three of the seven options were not being shown as options. The rows are back together and the prose follows them. Four numbers had gone stale, in three different ways, and none was noticed: - "Five more scripts run alongside it" - there are six, and lint.sh had no bullet saying what it was for. - "rebuild all three tools" - there are four. - Files.asm quoted at 645 bytes in two places; it is 665. - Edit quoted at 1,983; it is 1,996. The last two are the most quotable sentences in the CosmOS README and the least likely to be rechecked by hand: the programs kept being made better and the sentences about how small they are stayed where they were. So docs.sh measures all four now. It counts the scripts in Tests/ that are not the driver or the disk builder and checks the README says that many and explains each one; it counts what the makefile's all target builds and checks the tool count in both phrasings, which took two attempts because one sentence says "the four tools" and the other "all four tools"; and it assembles every app the CosmOS README quotes a size for and compares. Each check was confirmed by making the fact wrong and watching it fail. WAIT also added a second kind of cycle this morning and the cost model section still described only one. It now says what an idle cycle is, why the two are counted apart, and what that distinction is FOR - a machine that slept through a slow disk and one that spun on it take the same elapsed time and print the same characters, and only the split tells them apart. The duplicated sentence about pipelining is gone; it was said twice, eleven lines apart, in nearly the same words. |
||
|
Anachronaut
|
2b079324ae |
Add SplitLint, and let it be told when something is deliberate
SplitLint reports valid assembly that has a shorter direct expression: zero loads that could be RSTA or RSTB, Q moved through the stack where MVQA would do, self-cancelling push and pop pairs, assignments overwritten before use, unreachable fallthrough, one-byte pointer moves that could be INCD or DECD, a branch to the label directly below it, a SETD reloading an address the pointer already holds, and branches whose carry is known. Its model is deliberately local and conservative: every label and every directive forgets all known state, so a claim only ever lives inside a straight-line region. It knows the calling convention - CALL forgets DP3 and keeps the rest, RCAL and SWI forget everything - and it shares assembly.o with the assembler, so an added opcode cannot leave it holding a private copy of the instruction table. 260 warnings across the corpus, of which three were wrong in the way that matters: branchTest.asm and interruptFlagTest.asm exist to check that a branch whose carry is known behaves correctly, so a diagnostic saying the outcome is known is exactly right and exactly unwanted. A line whose comment says "splitlint: <reason>" is now not reported on. THE REASON IS REQUIRED and a bare marker is refused, because a suppression nobody explained outlives whatever made it necessary. Suppressed warnings are not counted, so --fatal-warnings does not fail on one, and the number of them is printed at the end so the claim is visible rather than silent. Tests/lint.sh checked a TOTAL: twenty three warnings expected, twenty three found. That number stays right while the thing behind it goes wrong - a rule that stopped firing while another fired twice would pass, and so would a rule reporting at the wrong line. It now checks which warning came out and at which line, that nothing else came out, and that the four lines meant to stay quiet did. Confirmed by breaking one rule's message and watching it name that rule: the old assertion passed the same sabotage, because the warning still fired and the count never moved. Written with the user while I was away; my part is the suppression mechanism, the harness rewrite, and the three marks in the test programs. |
||
|
Anachronaut
|
c216c83e12 |
The filesystem waits for the disk instead of asking it repeatedly
sbfsWaitDisk spun on the status port. Read ahead had already hidden about
three quarters of the latency, and what remained was still 11.5% of Type
over a 14K file on a ten thousand cycle disk - all of it memory traffic
spent finding out that nothing had happened yet.
It tests the port first and only waits if the disk is still busy, and that
order is the whole of what makes it safe: the disk raises its line when it
finishes, so a disk that finished in the gap between the test and the WAIT
has its line standing already and the WAIT does nothing rather than
sleeping through the answer. No handler and no vector - the shell keeps the
Interrupt Flag down, and a WAIT wakes on a line whether or not anybody
means to answer it.
Printing a 14K file, by where the cycles go:
cycles a block total bus waiting
0 922,570 922,570 0
2,000 946,474 922,702 23,772
10,000 1,042,474 922,702 119,772
The bus column stops moving. What the program costs in memory is now the
same whatever the disk does. On this emulator nothing observable changes;
on hardware it is a CPU standing out of the way of the memory controller
rather than competing with it for every one of those 119,772 cycles.
The first version cost 660 cycles more at latency zero because it read the
status port again on the way out. AND writes to Q and leaves A alone, so
the status was already there - which is what the original said in its own
comment, and what I stopped believing while rewriting around it.
|
||
|
Anachronaut
|
c3188ed657 |
Seventy becomes seventy one: a machine that can wait
HALT is terminal - stepCPU returns at once when the Halt Flag is up, so a halted machine does not execute, service devices, or take an interrupt - and that has to stay true, because every test ends with a halt and "halted" is how a program says it has finished. The consequence was that SplitBit had no way to wait at all. Every wait was a spin, and a spin is bus traffic: 11.5% of Type over a 14K file on a disk of ten thousand cycles, after read-ahead had already hidden three quarters of the latency. WAIT is 0xFE, one byte, no operands, sitting under HALT where the instruction that almost stops the machine belongs. Three decisions in it: - A line already standing means there is nothing to wait for, so WAIT does nothing. That is what makes test-then-wait race-free. - Any line ends the wait, masked or not, so a program can sleep on a device it has no handler for and read its status afterwards. Masking says who answers a request, not whether it happened. - A line that wakes the CPU without being dispatched is taken down by the WAIT. Left standing it would be found by the next WAIT, which would return at once - the program would spin exactly as before while looking as though it slept. Waiting is NOT a Status bit, and that is the trap avoided rather than a gap: Status rides into the interrupt frame and comes back out, so a machine interrupted mid-wait would return from its handler still waiting, and wait again for what it had already been given. An internal field instead. Idle cycles are counted apart from bus cycles and the halt line says so when there are any, which is what makes the difference observable at all - with the line-clearing removed the total moves by ONE cycle, 20,100 against 20,099, and only the idle half changes, halving to 9,976. A test on totals could never have seen it. Tests/terminal.sh asks that question, being the file for things a recorded output cannot see, and fails with the clear removed while "both reads finished" still passes. Three collisions, all found by building it: - 0xFE was the assembler's "not an instruction" sentinel. getOpcode now answers a negative NOT_AN_OPCODE, which is outside the range of every possible answer instead of inside the unused part of it. - 0xFE was also what faultTest and faultResumeTest executed to provoke a fault. They now use 0xFD and say why, because they did not fail when it became an instruction - they HUNG, having started sleeping instead. - Keys.asm has had a label called "wait" for a year, and mnemonics are matched uppercased. What that reported was "Branch without label" at the BRQ thirty lines away. The assembler now refuses a label that is already an instruction, at the label, by name; every instruction added takes a word out of the space of label names, so this will happen again. |
||
|
Anachronaut
|
6b41354f8f |
Delete a comment describing a design that was removed, and check the rest
Two comments in the native assembler survived the changes that made them false, and both are the kind that misleads rather than merely ages. Asm.asm still explained an eighteen kilobyte buffer that the whole output had to fit in "because a file is written in one call and there is nowhere to put half of one" - which stopped being true when the assembler learned to stream, and the variable it described, ImgRoom, does not exist any more. It was sitting in front of the comment that replaced it, so the paragraph a reader met first described the design that had been taken out. Replaced by what is actually there: no limit but the disk, one block at a time through a window in scratch. scratch.asm said the system keeps below 0x1000 twelve lines above the paragraph explaining that the system's half of Data Memory was doubled to 0x1FFF. A stale number next to its own correction is worse than a stale number alone, because which one a reader believes is a coin toss. docs.sh now checks both of the facts scratch.asm asserts about the machine around it: the floor it claims the system keeps below, against the CosmOS README, and the address its buffers start at, against where the assembler's own data actually ends. Neither is enforced by a line of code anywhere - the map is a comment, deliberately, because reserving the buffers would put 22K of zeroes in the file and the assembler could not load itself - so a check is the only thing that can hold them. Both fail when broken; the second reports the exact overlap. |
||
|
Anachronaut
|
c74075dc51 |
The review notes are all done, so the file that said to delete it goes
Six items, all fixed and all tested: the streamed commit bounded against its reservation, the memory map checked against itself, the save guarantee stated precisely, temporaries marked in the entry rather than by name, the path limits measured and left alone, and the directory bounded to what the parent field can name. The list of design strengths at the end went with it. It was a reader describing what the format gets right, which the README says in its own words and at more length; keeping a second copy in a file headed 'delete me' would only be a second copy to keep current. It is in the history if anybody wants to read it back. |
||
|
Anachronaut
|
ce0f18f4ef |
Refuse a directory whose last entries cannot be named as a parent
A parent is an entry index PLUS ONE in two bytes, so entry 65535 has no parent number: adding one wraps to zero, and zero is the root. Eight entries to a block, so 8192 directory blocks reaches it and SplitDisk formatted that happily. It does not fail by refusing, which is why it was worth chasing rather than reasoning about. Reproduced on a disk built for it: mkdir /deep/child, with /deep at entry 65535, printed 'Made "/deep/child" as entry 0' and put child in the ROOT. Listing /deep then showed nothing, because the search is for a parent of 65536 and the entry carries zero - so the same mkdir succeeded again, and again, and five entries called /child piled up in the root. Duplicate names in one directory are the one thing rename refuses outright, on the grounds that a search answers with whichever it meets first and the rest can never be reached; this manufactured them one per attempt. 8191 blocks is the most, giving 65528 entries. Refused when formatting and again when reading, in both implementations, because a disk claiming more was made by something that never checked. On the machine only the high byte of the count has to be looked at: anything from 0x20 up is too many. Three checks, all of which fail with their guard removed. The machine's disk claims the size rather than having it, so the test image is 64 blocks that lie rather than sixteen megabytes that do not - mounting is refused at the geometry, which is read out of block 0. |
||
|
Anachronaut
|
634650cab9 |
The path limits are settled: leave them, and say what they are
Measured rather than adjusted. The longest path on a full install is 21 characters against a native cap of about 117, so neither that nor SplitDisk's 512 binds anything, and both can be raised if that ever changes. Looking for the evidence turned up the limit that did bind - the prompt's 127 bytes, fixed in the commit before this one. |
||
|
Anachronaut
|
2b5506ee70 |
Stop the prompt writing off the front of its own buffer
The prompt is the working directory's path, worked out each time by walking the chain of parents up to the root. The names arrive deepest first, so they are written backwards from the end of a 127 byte buffer - and nothing bounded that walk. Nothing bounds the depth either. A path given to one operation is capped at 95 characters and a 22 character name, but "mkdir a" and "cd a" are each far inside that and can be repeated forever. Six directories of 22 characters is 132 characters of path, and at that point the walk wrote down past the front of CwdText and into what the assembler had laid out below it: the shell's own command names. ExitName sits five bytes under, so the word "exit" went first and the shell stopped recognising the command for leaving. Measured, not deduced: fine at five levels, gone at six. The walk now counts the room it has left, byte by byte, and stops. What is already written is the DEEP end of the path, which is the end worth showing, so it is cut at the front and three dots say so - out of three bytes held back from the count, so there is always somewhere to put them. Twenty levels deep the prompt shows the last five and every command still works. cosmosDeep records that, and records it by running help, cd and exit from down there rather than by looking at the prompt: a wrong prompt is cosmetic, and this was writing into other variables. It fails with the bound removed. The tree is built by SplitDisk because a path that long cannot be given to mkdir in one piece - which is the same fact that makes the depth unbounded. The three path limits are written down in the README now, including which one actually binds. The other two do not: the longest path on a full install is 21 characters. |
||
|
Anachronaut
|
0c240f7ad3 |
The temporary namespace is no longer a note
Two left: one path length both implementations agree on, and a bound on directory entries that keeps every one of them nameable as a parent. |
||
|
Anachronaut
|
ce8fb721fe |
Say a temporary is one in the entry, not in its name
Saving something that already exists writes a temporary, deletes the original and gives the temporary its name, so that nothing is lost if the writing fails. The temporary was told apart from a real file by being called sbfs.part or sbfs.out - and those are legal names. Starting a save deleted whatever answered to one as stale scratch, so saving anything at all in a directory destroyed your own file of that name there, silently. Flag bit 0x04 now says it. The property is not in the contents - the same bytes become the finished file the instant the rename lands - so it belongs in the entry, which is the thing the commit changes. sbfsCreateTempAt is the door temporaries come in by, the commit writes the flags flat along with the name, and cleanup wipes what it finds only if the entry says it is ours. Anything else stops the save instead. The bit is also the recovery. Both listings show an unfinished write rather than sizing it, because the size in the entry is the room that was asked for and not what was written: "<unfinished>" from dir, and a line from SplitDisk saying the blocks are held and a rename brings the data back. That was the gap in what the last commit documented - the data survived a crash and nothing would show you where it was. Four new agreement checks, three of which fail with the guards removed. The fourth needed rebuilding first: both tests started on one disk, and the first save ate the sbfs.part that was the second test's SOURCE, so the copy failed for want of a file, never opened a stream, and passed while reporting on nothing. A disk each. The fifth check forges the wreckage by setting the flag on a finished file, since nothing here can crash a save half way through. No version bump: a committed file never carries the bit, so a disk this writes is byte for byte the disk the old code wrote, which the whole-image comparisons confirm. Only the wreckage differs, and older code reads that as an ordinary file - which is what it did before. |
||
|
Anachronaut
|
d6cbbb5034 |
Strike the three review items that are now fixed
The streamed commit is bounded, the memory map is checked against itself, and the save guarantee says what it is. Three left: the temporary-file namespace, one path length both implementations agree on, and a bound on directory entries that keeps every one of them nameable as a parent. |
||
|
Anachronaut
|
9e2aa0122e |
Say what a safe save actually promises, and where it stops
Both sbfsSaveFile and sbfsStreamDone write a temporary, delete the original and rename the temporary onto its name, and the README explained why that order and not the obvious one. It never said what the resulting guarantee is, which invited the stronger reading: "safe save" sounds like it survives anything. It survives everything that goes wrong while it is running - no run long enough, no free blocks, a refused write, a name that turns out to be a directory, a writer that gives up - and in all of those the original is untouched. It does not survive the machine stopping, because the commit is two block writes with a gap between them: stop there and the old file is gone and the new one is still called sbfs.part. The bytes are all present and one rename by hand recovers them, but nothing does that on its own. Written down in the README beside the ordering it qualifies, and at both commit points in sbfs.asm, where a reader is when the question occurs to them. Closing the gap wants a journal or a second directory, which is a lot of disk for two writes; a boot-time consistency check is the cheaper answer if it ever matters, and it would want temporaries flagged in the entry rather than recognised by name. |
||
|
Anachronaut
|
aa7bdc6acd |
Check the memory map against itself, not only against the code
The CosmOS README's Data row gave the system 0x0000-0x3FFF and a loaded application 0x2000 and above: two columns of one row that cannot both be true. Program was doubled to 0x3FFF when CosmOS outgrew its first map and that number was copied into the Data row as well, where the answer is 0x1FFF. docs.sh measured both segments against the CosmOS column and passed the table anyway, because it never read the column beside it. A number checked against the code and not against the number next to it is still unchecked, so it now reads both and compares them - and compares two further copies of the same fact that had gone stale on their own: the minimal application in the README, still based where applications lived before the doubling, and the map cosmos.asm opens with, which somebody reading the system reads before they read the README. Each of the three checks was confirmed by breaking the fact and watching it fail; the first reproduces exactly the text this commit removes. While in that header, the command list said five commands and CosmOS has eleven and a search path besides, and "dump is next" outlived the monitor. |
||
|
AnachronautandClaude Opus 5
|
db3d349da8 |
Read the next block while the program is busy with this one
A file is read front to back, so when something asks for a block, the one after it is almost certainly wanted next. sbfsReadOne asks the disk for it straight away and hands back the block that was wanted - so the transfer happens while the caller is busy, and the waiting is mostly over by the time it comes back. Printing a fourteen kilobyte file: 1,064,498 cycles at two thousand a block becomes 976,882, and 1,576,562 at ten thousand becomes 1,032,889. The second figure barely moves between those - seven per cent from an instant disk to a slow one, where without it the same change costs sixty eight. A machine that reads ahead stops caring very much how fast its disk is. NOT FOR DIRECTORY SEARCHES, and that was tried first and thrown away. A scan stops the moment it matches, so the block it would read ahead is one nobody will ever look at - a transfer to fetch and another wait to throw away. It was nineteen per cent SLOWER on a lookup at ten thousand cycles a block. Reading ahead is a bet that the next block is wanted, and a search is exactly the case that hopes it is not. The scan loop is untouched. Three per cent is what it costs when the disk is instant, which is the bookkeeping with nothing to hide behind it, and the default. The disk has one buffer, so the only way to know what is in it is to remember what was last asked for. Every read records that; a write clears it, because a write fills the buffer from memory and no read asked for what is in it. Getting that wrong would blit whatever happened to be there and call it the block somebody wanted. The read ahead is bounded by the file's own length, so reading the last block does not fetch whatever follows the file on the disk - which belongs to somebody else and would be paid for twice, once to fetch and once to discard. It cost one bug, and an instructive one: the next index was worked out by stepping SbfsIndex, which is the CALLER'S and is still wanted after the return - handleFileBlock compares it against the file's length to see whether this was the short last block. Every block reported the wrong number of bytes, and the output of Type skipped five lines in the middle. It has a place of its own now. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01E2JrLzFvuFX9fgi1LDRjrW |